Machining distortion minimization for the manufacturing of aeronautical structure

[1]  Berend Denkena,et al.  New Production Technologies in Aerospace Industry , 2014 .

[2]  B. Denkena,et al.  Simulation of Residual Stress Related Part Distortion , 2014 .

[3]  P. Castro,et al.  Methodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determination , 2013 .

[4]  Liping Liu.  THEORY OF ELASTICITY , 2012 .

[5]  John D. Watton,et al.  Fatigue Life Variability in Large Aluminum Forgings with Residual Stress , 2011 .

[6]  Ekkard Brinksmeier,et al.  Distortion minimization of disks for gear manufacture , 2011 .

[7]  P. J. Bouchard,et al.  Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam , 2012 .

[8]  S. Srivatsa,et al.  Modeling of Residual Stress and Machining Distortion in Aerospace Components , 2010 .

[9]  D. Hughes,et al.  Residual stress in 7449 aluminium alloy forgings , 2010 .

[10]  Keith A. Young,et al.  Prediction of Distortion of Airframe Components Made from Aluminum Plates , 2009 .

[11]  Ekkard Brinksmeier,et al.  Prediction of shape deviations in machining , 2009 .

[12]  W. Sim.  Challenges of residual stress and part distortion in the civil airframe industry , 2008 .

[13]  K. Eckelmeyer,et al.  Overcoming residual stresses and machining distortion in the production of aluminum alloy satellite boxes. , 2007 .

[14]  Michael B. Prime,et al.  Laser surface-contouring and spline data-smoothing for residual stress measurement , 2004 .

[15]  Michael R. Hill,et al.  Residual stress, stress relief, and inhomogeneity in aluminum plate , 2002 .

[16]  M. Prime.  Cross-sectional mapping of residual stresses by measuring the surface contour after a cut , 2001 .

[17]  Timothy Warner,et al.  Engineering for the future: weight saving and cost reduction initiatives , 2001 .

[18]  Michael B. Prime,et al.  Residual Stress Measurement by Successive Extension of a Slot: The Crack Compliance Method , 1999 .

[19]  John R. Shadley,et al.  Through-thickness residual stress evaluations for several industrial thermal spray coatings using a modified layer-removal method , 1994 .

[20]  W. König,et al.  Residual Stresses — Measurement and Causes in Machining Processes , 1982 .