Complete denture analyzed by optical coherence tomography

The complete dentures are currently made using different technologies. In order to avoid deficiencies of the prostheses made using the classical technique, several alternative systems and procedures were imagined, directly related to the material used and also to the manufacturing technology. Thus, at the present time, there are several injecting systems and technologies on the market, that use chemoplastic materials, which are heat cured (90-100°C), in dry or wet environment, or cold cured (below 60°C). There are also technologies that plasticize a hard cured material by thermoplastic processing (without any chemical changes) and then inject it into a mold. The purpose of this study was to analyze the existence of possible defects in several dental prostheses using a non invasive method, before their insertion in the mouth. Different dental prostheses, fabricated from various materials were investigated using en-face optical coherence tomography. In order to discover the defects, the scanning was made in three planes, obtaining images at different depths, from 0,01 μm to 2 mm. In several of the investigated prostheses we found defects which may cause their fracture. These defects are totally included in the prostheses material and can not be vizualised with other imagistic methods. In conclusion, en-face OCT is an important investigative tool for the dental practice.

[1]  Leonard Garth Lowe,et al.  Flexible denture flanges for patients exhibiting undercut tuberosities and reduced width of the buccal vestibule: a clinical report. , 2004, The Journal of prosthetic dentistry.

[2]  R A Kopczyk,et al.  Removable partial dentures and oral health: a literature review. , 1977, The Journal of the Western Society of Periodontology/Periodontal abstracts.

[3]  L L Otis,et al.  Imaging of hard- and soft-tissue structure in the oral cavity by optical coherence tomography. , 1998, Applied optics.

[4]  Arthur John Beaumont,et al.  An overview of esthetics with removable partial dentures. , 2002, Quintessence international.

[5]  David A. Jackson,et al.  Correlation of quantitative light-induced fluorescence and optical coherence tomography applied for detection and quantification of early dental caries. , 2003, Journal of biomedical optics.

[6]  B E Bouma,et al.  Scanning single-mode fiber optic catheter-endoscope for optical coherence tomography: erratum. , 1996, Optics letters.

[7]  M Sela,et al.  [The use of Dental D (polyacetal resin) as an alternative for chrome-cobalt removable partial denture: a case report]. , 2001, Refu'at ha-peh veha-shinayim.

[8]  Ali Parvizi,et al.  Comparison of the dimensional accuracy of injection-molded denture base materials to that of conventional pressure-pack acrylic resin. , 2004, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[9]  D. Radford,et al.  Dimensional change in complete dentures fabricated by injection molding and microwave processing. , 2003, The Journal of prosthetic dentistry.

[10]  David A. Jackson,et al.  Three dimensional OCT images from retina and skin. , 2000, Optics express.

[11]  Bernd Wöstmann,et al.  Indications for removable partial dentures: a literature review. , 2005 .

[12]  Rodney D Phoenix,et al.  Evaluation of mechanical and thermal properties of commonly used denture base resins. , 2004, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[13]  Mehmet Mutlu,et al.  Modification of glass fibers to improve reinforcement: a plasma polymerization technique. , 2007, Dental materials : official publication of the Academy of Dental Materials.

[14]  Richard Bibb,et al.  A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. , 2004, The Journal of prosthetic dentistry.

[15]  H Helenius,et al.  Clinical survey of acrylic resin removable denture repairs with glass-fiber reinforcement. , 2001, The International journal of prosthodontics.

[16]  S P Haug,et al.  A pilot clinical evaluation of a new injection denture base system. , 2001, Compendium of continuing education in dentistry.

[17]  M Sherriff,et al.  Flexural properties and surface finishing of acetal resin denture clasps. , 1999, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[18]  Luiz B. Da Silva,et al.  Birefringence characterization of biological tissue using optical coherence tomography , 1998, Photonics West - Biomedical Optics.