Hard Carbons as Anodes in Sodium-Ion Batteries: Sodium Storage Mechanism and Optimization Strategies

Sodium-ion batteries (SIBs) are regarded as promising alternatives to lithium-ion batteries (LIBs) in the field of energy, especially in large-scale energy storage systems. Tremendous effort has been put into the electrode research of SIBs, and hard carbon (HC) stands out among the anode materials due to its advantages in cost, resource, industrial processes, and safety. However, different from the application of graphite in LIBs, HC, as a disordered carbon material, leaves more to be completely comprehended about its sodium storage mechanism, and there is still plenty of room for improvement in its capacity, rate performance and cycling performance. This paper reviews the research reports on HC materials in recent years, especially the research process of the sodium storage mechanism and the modification and optimization of HC materials. Finally, the review summarizes the sterling achievements and the challenges on the basis of recent progress, as well as the prospects on the development of HC anode materials in SIBs.

[1]  Rongzhang Guan,et al.  Amorphous TiO2-x modified Sb nanowires as a high-performance sodium-ion battery anode , 2022, Journal of Non-Crystalline Solids.

[2]  Hao Wang,et al.  Engineering Surface Oxygenated Functionalities on Commercial Hard Carbon toward Superior Sodium Storage , 2022, Chemical Engineering Journal.

[3]  Junghoon Yang,et al.  Origin of enhanced reversible Na ion storage in hard carbon anode through p-type molecular doping , 2022, Journal of Materials Chemistry A.

[4]  Bin Luo,et al.  Confining ultrafine tin monophosphide in Ti3C2Tx interlayers for rapid and stable sodium ion storage , 2021, eScience.

[5]  S. Chou,et al.  Soft-Carbon-Coated, Free-Standing, Low-Defect, Hard-Carbon Anode To Achieve a 94% Initial Coulombic Efficiency for Sodium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[6]  X. Zhao,et al.  A review on biomass-derived hard carbon materials for sodium-ion batteries , 2021 .

[7]  Dong Wang,et al.  Porous flexible nitrogen-rich carbon membranes derived from chitosan as free-standing anodes for potassium-ion and sodium-ion batteries , 2021 .

[8]  Feng Wu,et al.  Elucidating the Mechanism of Fast Na Storage Kinetics in Ether Electrolytes for Hard Carbon Anodes , 2021, Advanced materials.

[9]  R. Ruffo,et al.  Algae-derived hard carbon anodes for Na-ion batteries , 2021, Journal of Applied Electrochemistry.

[10]  Tie-hu Li,et al.  Experimental design and theoretical evaluation of nitrogen and phosphorus dual-doped hierarchical porous carbon for high-performance sodium-ion storage , 2021 .

[11]  Yaxiang Lu,et al.  Fundamentals, status and promise of sodium-based batteries , 2021, Nature Reviews Materials.

[12]  Huamin Zhang,et al.  Enabling superior rate capability and reliable sodium ion batteries by employing galvanostatic-potentiostatic operation mode , 2021 .

[13]  Lin Li,et al.  Functionalized carbon dots for advanced batteries , 2021 .

[14]  Zhanhu Guo,et al.  Agaric-like anodes of porous carbon decorated with MoO2 nanoparticles for stable ultralong cycling lifespan and high-rate lithium/sodium storage. , 2021, Journal of colloid and interface science.

[15]  P. Yan,et al.  Ultra-high initial coulombic efficiency induced by interface engineering enables rapid, stable sodium storage. , 2021, Angewandte Chemie.

[16]  Tie-hu Li,et al.  Multi-heteroatom doped porous carbon derived from insect feces for capacitance-enhanced sodium-ion storage , 2021, Journal of Energy Chemistry.

[17]  Guoxiu Wang,et al.  Facile self-templating synthesis of layered carbon with N, S dual doping for highly efficient sodium storage , 2021 .

[18]  Yi Du,et al.  Self‐standing hard carbon anode derived from hyper‐linked nanocellulose with high cycling stability for lithium‐ion batteries , 2021, EcoMat.

[19]  Abdullah M. Asiri,et al.  Constructing a hollow microflower-like ZnS/CuS@C heterojunction as an effective ion-transport booster for an ultrastable and high-rate sodium storage anode , 2021 .

[20]  Hong Li,et al.  Probing the Energy Storage Mechanism of Quasi‐Metallic Na in Hard Carbon for Sodium‐Ion Batteries , 2021, Advanced Energy Materials.

[21]  P. Shen,et al.  Natural mushroom spores derived hard carbon plates for robust and low-potential sodium ion storage , 2021 .

[22]  G. Ceder,et al.  Promises and Challenges of Next-Generation "Beyond Li-ion" Batteries for Electric Vehicles and Grid Decarbonization. , 2020, Chemical reviews.

[23]  S. Dou,et al.  Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na‐Ion Batteries beyond Li‐Ion and K‐Ion Counterparts , 2020, Advanced Energy Materials.

[24]  M. Kuenzel,et al.  The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites , 2020, Sustainable Energy & Fuels.

[25]  Liangtao Yang,et al.  Cost-effective and renewable paper derived hard carbon microfibers as superior anode for sodium-ion batteries , 2020 .

[26]  Q. Cai,et al.  Correction: A revised mechanistic model for sodium insertion in hard carbons , 2020, Energy & Environmental Science.

[27]  Bin Huang,et al.  Encapsulating NiS nanocrystal into nitrogen-doped carbon framework for high performance sodium/potassium-ion storage , 2020 .

[28]  Jiale Chen,et al.  High N-doped hierarchical porous carbon networks with expanded interlayers for efficient sodium storage , 2020, Nano Research.

[29]  Xing-long Wu,et al.  Large-scale Ni-MOF derived Ni3S2 nanocrystals embedded in N-doped porous carbon nanoparticles for high-rate Na+ storage , 2020 .

[30]  Darren H. S. Tan,et al.  Sodium‐Ion Batteries Paving the Way for Grid Energy Storage , 2020, Advanced Energy Materials.

[31]  Bo Liu,et al.  Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage , 2020, Advanced Energy Materials.

[32]  Zheng Zhang,et al.  Core–Shell Co, Zn Bimetallic Selenide Embedded Nitrogen-Doped Carbon Polyhedral Frameworks Assist in Sodium-Ion Battery Ultralong Cycle , 2020 .

[33]  H. Duan,et al.  Highly active Fe7S8 encapsulated in N-doped hollow carbon nanofibers for high-rate sodium-ion batteries , 2020 .

[34]  D. Yan,et al.  Hard Carbon Nanosheets with Uniform Ultramicropores and Accessible Functional Groups Showing High Realistic Capacity and Superior Rate Performance for Sodium‐Ion Storage , 2020, Advanced materials.

[35]  Jiangfeng Qian,et al.  Chemically Presodiated Hard Carbon Anode with Enhanced Initial Coulombic Efficiency for High Energy Sodium ion Battery. , 2020, ACS applied materials & interfaces.

[36]  Xing Ou,et al.  Bimetallic Sulfide Sb2S3@FeS2 Hollow Nanorods as High-Performance Anode Materials for Sodium-Ion Batteries. , 2020, ACS nano.

[37]  X. Lou,et al.  Rationally Designed Three-Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage. , 2020, Angewandte Chemie.

[38]  W. Zhong,et al.  Superresilient Hard Carbon Nanofabrics for Sodium-Ion Batteries. , 2020, Small.

[39]  Kaiqi Xu,et al.  Na+-storage properties derived from a high pseudocapacitive behavior for nitrogen-doped porous carbon anode , 2020 .

[40]  Jianmin Ma,et al.  Nitrogen doped porous carbon as excellent dual anodes for Li- and Na-ion batteries , 2020 .

[41]  Ang Li,et al.  Three-dimensional porous carbon doped with N, O and P heteroatoms as high-performance anode materials for sodium ion batteries , 2020 .

[42]  Chen Chen,et al.  Nonignorable Influence of Oxygen in Hard Carbon for Sodium Ion Storage , 2020 .

[43]  Bingkun Guo,et al.  Hard carbon micro-nano tubes derived from kapok fiber as anode materials for sodium-ion batteries and the sodium-ion storage mechanism. , 2019, Chemical communications.

[44]  A. Yamada,et al.  Mechanism of Sodium Storage in Hard Carbon: An X‐Ray Scattering Analysis , 2019, Advanced Energy Materials.

[45]  Dongjiang Yang,et al.  High nitrogen doped carbon nanofiber aerogels for sodium ion batteries: synergy of vacancy defects to boost sodium ion storage , 2019 .

[46]  Haiyan Wang,et al.  Understanding and improving the initial Coulombic efficiency of high-capacity anode materials for practical sodium ion batteries , 2019 .

[47]  Ran Liu,et al.  Three-dimensional biomass derived hard carbon with reconstructed surface as a free-standing anode for sodium-ion batteries. , 2019, Journal of colloid and interface science.

[48]  Yaxiang Lu,et al.  Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance , 2019, Advanced Energy Materials.

[49]  Yan Yu,et al.  A facile strategy toward sodium-ion batteries with ultra-long cycle life and high initial Coulombic Efficiency: Free-standing porous carbon nanofiber film derived from bacterial cellulose , 2019, Energy Storage Materials.

[50]  Xiaobo Ji,et al.  Engineering the trap effect of residual oxygen atoms and defects in hard carbon anode towards high initial Coulombic efficiency , 2019, Nano Energy.

[51]  Haiyan Lu,et al.  Engineering Al2O3 atomic layer deposition: Enhanced hard carbon-electrolyte interface towards practical sodium ion batteries , 2019, Nano Energy.

[52]  Peng Zhang,et al.  Conductive carbon nanofiber interpenetrated graphene architecture for ultra-stable sodium ion battery , 2019, Nature Communications.

[53]  P. Simon,et al.  A SAXS outlook on disordered carbonaceous materials for electrochemical energy storage , 2019, Energy Storage Materials.

[54]  Xi Feng,et al.  Self‐Supporting, Flexible, Additive‐Free, and Scalable Hard Carbon Paper Self‐Interwoven by 1D Microbelts: Superb Room/Low‐Temperature Sodium Storage and Working Mechanism , 2019, Advanced materials.

[55]  Kangli Wang,et al.  A high-performance carbon with sulfur doped between interlayers and its sodium storage mechanism as anode material for sodium ion batteries , 2019, Journal of Alloys and Compounds.

[56]  Zhaoxiang Wang,et al.  Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons , 2019, Advanced Energy Materials.

[57]  P. C. Rath,et al.  Carbonaceous Anodes Derived from Sugarcane Bagasse for Sodium-Ion Batteries. , 2019, ChemSusChem.

[58]  Yun Qiao,et al.  3D well-ordered porous phosphorus doped carbon as an anode for sodium storage: structure design, experimental and computational insights , 2019, Journal of Materials Chemistry A.

[59]  Kangli Wang,et al.  Experimental design and theoretical calculation for sulfur-doped carbon nanofibers as a high performance sodium-ion battery anode , 2019, Journal of Materials Chemistry A.

[60]  Yaxiang Lu,et al.  Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance , 2019, Advanced Functional Materials.

[61]  Christopher S. Johnson,et al.  A New Emerging Technology: Na‐Ion Batteries , 2019, Small Methods.

[62]  Zhenhua Wang,et al.  Heteroatom‐Doped Mesoporous Hollow Carbon Spheres for Fast Sodium Storage with an Ultralong Cycle Life , 2019, Advanced Energy Materials.

[63]  V. Mathew,et al.  Phase-pure Na3V2(PO4)2F3 embedded in carbon matrix through a facile polyol synthesis as a potential cathode for high performance sodium-ion batteries , 2019, Nano Research.

[64]  Stefano Passerini,et al.  Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry , 2019, Materials Today.

[65]  Yan Yu,et al.  Na3V2(PO4)3: an advanced cathode for sodium-ion batteries. , 2019, Nanoscale.

[66]  X. Lou,et al.  Hierarchical Microboxes Constructed by SnS Nanoplates Coated with Nitrogen-Doped Carbon for Efficient Sodium Storage. , 2019, Angewandte Chemie.

[67]  Clement Bommier,et al.  Electrochemical Properties and Theoretical Capacity for Sodium Storage in Hard Carbon: Insights from First Principles Calculations , 2019, Chemistry of Materials.

[68]  L. Mai,et al.  Defect‐Rich Soft Carbon Porous Nanosheets for Fast and High‐Capacity Sodium‐Ion Storage , 2018, Advanced Energy Materials.

[69]  Chenglong Zhao,et al.  Pre‐Oxidation‐Tuned Microstructures of Carbon Anodes Derived from Pitch for Enhancing Na Storage Performance , 2018, Advanced Energy Materials.

[70]  Yaxiang Lu,et al.  Structural Engineering of Multishelled Hollow Carbon Nanostructures for High‐Performance Na‐Ion Battery Anode , 2018, Advanced Energy Materials.

[71]  Hong Wang,et al.  New Binder‐Free Metal Phosphide–Carbon Felt Composite Anodes for Sodium‐Ion Battery , 2018, Advanced Energy Materials.

[72]  S. Passerini,et al.  Impact of the Acid Treatment on Lignocellulosic Biomass Hard Carbon for Sodium-Ion Battery Anodes. , 2018, ChemSusChem.

[73]  Fernando A. Soto,et al.  Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes , 2018, Advanced Energy Materials.

[74]  Yunhua Xu,et al.  Long cycle life and high rate sodium-ion chemistry for hard carbon anodes , 2018, Energy Storage Materials.

[75]  Jun Liu,et al.  Low‐Defect and Low‐Porosity Hard Carbon with High Coulombic Efficiency and High Capacity for Practical Sodium Ion Battery Anode , 2018 .

[76]  Feng Wu,et al.  Phosphorus-Doped Hard Carbon Nanofibers Prepared by Electrospinning as an Anode in Sodium-Ion Batteries. , 2018, ACS applied materials & interfaces.

[77]  T. Rojo,et al.  From Charge Storage Mechanism to Performance: A Roadmap toward High Specific Energy Sodium‐Ion Batteries through Carbon Anode Optimization , 2018 .

[78]  Mingdeng Wei,et al.  Rational Design and General Synthesis of S‐Doped Hard Carbon with Tunable Doping Sites toward Excellent Na‐Ion Storage Performance , 2018, Advanced materials.

[79]  Xinxin Zhao,et al.  Elucidation of the Sodium‐Storage Mechanism in Hard Carbons , 2018 .

[80]  Qi Li,et al.  A porous biomass-derived anode for high-performance sodium-ion batteries , 2018 .

[81]  Min Zhu,et al.  High-performance anode materials for Na-ion batteries , 2018, Rare Metals.

[82]  Hua Wang,et al.  Direct chitin conversion to N-doped amorphous carbon nanofibers for high-performing full sodium-ion batteries , 2018 .

[83]  Jianqiu Deng,et al.  Sodium‐Ion Batteries: From Academic Research to Practical Commercialization , 2018 .

[84]  X. Zhao,et al.  Capacitance-enhanced sodium-ion storage in nitrogen-rich hard carbon , 2017 .

[85]  Jun Liu,et al.  Manipulating Adsorption–Insertion Mechanisms in Nanostructured Carbon Materials for High‐Efficiency Sodium Ion Storage , 2017 .

[86]  J. L. Gómez‐Cámer,et al.  Na‐Ion Batteries for Large Scale Applications: A Review on Anode Materials and Solid Electrolyte Interphase Formation , 2017 .

[87]  Clement Bommier,et al.  Mechanism of Na‐Ion Storage in Hard Carbon Anodes Revealed by Heteroatom Doping , 2017 .

[88]  Leping Yang,et al.  Boosting the rate capability of hard carbon with an ether-based electrolyte for sodium ion batteries , 2017 .

[89]  W. Luo,et al.  Low temperature carbonization of cellulose nanocrystals for high performance carbon anode of sodium-ion batteries , 2017 .

[90]  M. Wilkening,et al.  An Electrolyte for Reversible Cycling of Sodium Metal and Intercalation Compounds. , 2017, ChemSusChem.

[91]  Quan-hong Yang,et al.  Achieving superb sodium storage performance on carbon anodes through an ether-derived solid electrolyte interphase , 2017 .

[92]  Xiaobo Ji,et al.  Large‐Area Carbon Nanosheets Doped with Phosphorus: A High‐Performance Anode Material for Sodium‐Ion Batteries , 2016, Advanced science.

[93]  M. Armand,et al.  NaN3 addition, a strategy to overcome the problem of sodium deficiency in P2-Na0.67[Fe0.5Mn0.5]O2 cathode for sodium-ion battery , 2017 .

[94]  Wenping Sun,et al.  Engineering Hierarchical Hollow Nickel Sulfide Spheres for High‐Performance Sodium Storage , 2016 .

[95]  Xingguo Qi,et al.  Advanced sodium-ion batteries using superior low cost pyrolyzed anthracite anode: towards practical applications , 2016 .

[96]  W. Luo,et al.  In Situ Transmission Electron Microscopy Observation of Sodiation–Desodiation in a Long Cycle, High-Capacity Reduced Graphene Oxide Sodium-Ion Battery Anode , 2016 .

[97]  Yong‐Sheng Hu,et al.  Hard Carbon Microtubes Made from Renewable Cotton as High‐Performance Anode Material for Sodium‐Ion Batteries , 2016 .

[98]  Sebastien Martinet,et al.  Hard carbon derived from cellulose as anode for sodium ion batteries: Dependence of electrochemical properties on structure , 2016 .

[99]  K. Kubota,et al.  Combination of solid state NMR and DFT calculation to elucidate the state of sodium in hard carbon electrodes , 2016 .

[100]  Yong‐Sheng Hu,et al.  Novel 1.5 V anode materials, ATiOPO4 (A = NH4, K, Na), for room-temperature sodium-ion batteries , 2016 .

[101]  Lei Zhang,et al.  Free‐Standing Nitrogen‐Doped Carbon Nanofiber Films: Integrated Electrodes for Sodium‐Ion Batteries with Ultralong Cycle Life and Superior Rate Capability , 2016 .

[102]  S. Ramakrishna,et al.  Preparation of nitrogen- and phosphorous co-doped carbon microspheres and their superior performance as anode in sodium-ion batteries , 2016 .

[103]  Jie Cai,et al.  A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries , 2016 .

[104]  J. Tarascon,et al.  Insertion compounds and composites made by ball milling for advanced sodium-ion batteries , 2016, Nature Communications.

[105]  Tao Qian,et al.  A Sustainable Route from Biomass Byproduct Okara to High Content Nitrogen‐Doped Carbon Sheets for Efficient Sodium Ion Batteries , 2015, Advanced materials.

[106]  Wei Wang,et al.  Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries , 2016 .

[107]  Yong‐Sheng Hu,et al.  A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries , 2016 .

[108]  Chao Lai,et al.  A type of sodium-ion full-cell with a layered NaNi0.5Ti0.5O2 cathode and a pre-sodiated hard carbon anode , 2015 .

[109]  Yan Zhang,et al.  Carbon Quantum Dots and Their Derivative 3D Porous Carbon Frameworks for Sodium‐Ion Batteries with Ultralong Cycle Life , 2015, Advanced materials.

[110]  Haihui Wang,et al.  Porous nitrogen doped carbon sphere as high performance anode of sodium-ion battery , 2015 .

[111]  Chuan-bin Chong,et al.  Properties and sodium insertion behavior of Phenolic Resin-based hard carbon microspheres obtained by a hydrothermal method , 2015 .

[112]  Huan Liu,et al.  Facile synthesis of high performance hard carbon anode materials for sodium ion batteries , 2015 .

[113]  J. Bao,et al.  Fluorine-Doped Carbon Particles Derived from Lotus Petioles as High-Performance Anode Materials for Sodium-Ion Batteries , 2015 .

[114]  Xiulei Ji,et al.  New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon. , 2015, Nano letters.

[115]  F. Fauth,et al.  Comprehensive Investigation of the Na3V2(PO4)2F3–NaV2(PO4)2F3 System by Operando High Resolution Synchrotron X-ray Diffraction , 2015 .

[116]  M. R. Palacín,et al.  Review-Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries , 2015 .

[117]  K. Kubota,et al.  Review-Practical Issues and Future Perspective for Na-Ion Batteries , 2015 .

[118]  Yuesheng Wang,et al.  Amorphous monodispersed hard carbon micro-spherules derived from biomass as a high performance negative electrode material for sodium-ion batteries , 2015 .

[119]  K. Kang,et al.  Sodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems , 2015 .

[120]  Haoran Zhao,et al.  Review of energy storage system for wind power integration support , 2015 .

[121]  Zhiguang Wang,et al.  N-doped ordered mesoporous carbon as a high performance anode material in sodium ion batteries at room temperature , 2014 .

[122]  Philipp Adelhelm,et al.  Use of graphite as a highly reversible electrode with superior cycle life for sodium-ion batteries by making use of co-intercalation phenomena. , 2014, Angewandte Chemie.

[123]  Xiulei Ji,et al.  Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements , 2014 .

[124]  D. Butt,et al.  In Silico Based Rank-Order Determination and Experiments on Nonaqueous Electrolytes for Sodium Ion Battery Applications , 2014 .

[125]  Kai He,et al.  Expanded graphite as superior anode for sodium-ion batteries , 2014, Nature Communications.

[126]  Yan Yu,et al.  Nitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance. , 2014, Nanoscale.

[127]  Gerbrand Ceder,et al.  Electrochemical properties of NaNi1/3Co1/3Fe1/3O2 as a cathode material for Na-ion batteries , 2014 .

[128]  Mikael Höök,et al.  Lithium availability and future production outlooks , 2013 .

[129]  P. Balaya,et al.  α-MoO3: A high performance anode material for sodium-ion batteries , 2013 .

[130]  S. Dou,et al.  Reduced graphene oxide with superior cycling stability and rate capability for sodium storage , 2013 .

[131]  J. Tarascon,et al.  Titanium(III) Sulfate as New Negative Electrode for Sodium-Ion Batteries , 2013 .

[132]  John B Goodenough,et al.  A superior low-cost cathode for a Na-ion battery. , 2013, Angewandte Chemie.

[133]  Jiangfeng Qian,et al.  SiC-Sb-C nanocomposites as high-capacity and cycling-stable anode for sodium-ion batteries , 2013 .

[134]  Oleg G. Poluektov,et al.  Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells , 2012 .

[135]  Jean-Marie Tarascon,et al.  In search of an optimized electrolyte for Na-ion batteries , 2012 .

[136]  M. Armand,et al.  Disodium Terephthalate (Na2C8H4O4) as High Performance Anode Material for Low‐Cost Room‐Temperature Sodium‐Ion Battery , 2012 .

[137]  Jun Liu,et al.  Sodium ion insertion in hollow carbon nanowires for battery applications. , 2012, Nano letters.

[138]  Hideki Nakayama,et al.  First-principles study of alkali metal-graphite intercalation compounds , 2012 .

[139]  Kazuma Gotoh,et al.  Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion Batteries , 2011 .

[140]  G. Keoleian,et al.  Global Lithium Availability , 2011 .

[141]  Jean-Marie Tarascon,et al.  Na2Ti3O7: Lowest voltage ever reported oxide insertion electrode for sodium ion batteries , 2011 .

[142]  M. Armand,et al.  Building better batteries , 2008, Nature.

[143]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[144]  Ricardo Alcántara,et al.  Carbon black: a promising electrode material for sodium-ion batteries , 2001 .

[145]  D. Stevens,et al.  The Mechanisms of Lithium and Sodium Insertion in Carbon Materials , 2001 .

[146]  D. Stevens,et al.  High Capacity Anode Materials for Rechargeable Sodium‐Ion Batteries , 2000 .

[147]  P. Novák,et al.  Graphites for lithium-ion cells : The correlation of the first-cycle charge loss with the Brunauer-Emmett-Teller surface area , 1998 .

[148]  F. G. Emmerich.  Evolution with heat treatment of crystallinity in carbons , 1995 .

[149]  B. Scrosati,et al.  Lithium-ion rechargeable batteries , 1994 .

[150]  Jeff Dahn,et al.  Studies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells , 1990 .