Structure–property interface correlation of fly ash–isotactic polypropylene composites

[1]  Chifei Wu,et al.  Crystallization Behavior of Polypropylene Filled with Modified Carbon Black , 2007 .

[2]  B. Kutchko,et al.  Fly ash characterization by SEM–EDS , 2006 .

[3]  C. Ward,et al.  Determination of glass content and estimation of glass composition in fly ash using quantitative X-ray diffractometry , 2006 .

[4]  R. Misra,et al.  Impact fracture behavior of clay–reinforced polypropylene nanocomposites , 2006 .

[5]  R. S. Rajeev,et al.  Atomic Force Microscopic Studies on the Silicone Rubber-Fluororubber Blend Containing Ground Rubber Vulcanizate Powder , 2006 .

[6]  R. Sriraman,et al.  Effect of processing parameters and clay volume fraction on the mechanical properties of epoxy-clay nanocomposites , 2006 .

[7]  H. Sue,et al.  Mechanical properties of talc- and CaCO3-reinforced high-crystallinity polypropylene composites , 2006 .

[8]  R. McDowell.  The effectiveness of coal fly-ash to decrease phosphorus loss from grassland soils , 2005 .

[9]  C. S. Kazmierczak,et al.  STUDY OF THE MODULUS OF ELASTICITY OF POLYMER CONCRETE COMPOUNDS AND COMPARATIVE ASSESSMENT OF POLYMER CONCRETE AND PORTLAND CEMENT CONCRETE , 2004 .

[10]  K. Char,et al.  Crystallization Kinetics of Maleated Polypropylene/Clay Hybrids , 2004 .

[11]  Y. Mai,et al.  Crystallization And Impact Energy Of Polypropylene/Caco3 Nanocomposites With Nonionic Modifier , 2004 .

[12]  Zhi-gang Shen,et al.  Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres , 2004 .

[13]  Z. Ishak,et al.  Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites , 2004 .

[14]  Yao Wang,et al.  Effects of organic nucleating agents and zinc oxide nanoparticles on isotactic polypropylene crystallization , 2004 .

[15]  K. Friedrich,et al.  Analysis of the interfacial interactions in polypropylene/silica nanocomposites , 2004 .

[16]  S. Guhanathan,et al.  Studies on interface in polyester/fly-ash particulate composites , 2004 .

[17]  S. Anandhan,et al.  Thermoplastic Elastomeric Blend of Nitrile Rubber and Poly(styrene-co-acrylonitrile). II. Replacement of Nitrile Rubber by Its Vulcanizate Powder , 2003 .

[18]  M. Mucha,et al.  Application of dsc to study crystallization kinetics of polypropylene containing fillers , 2003 .

[19]  J. Kenny,et al.  EFFECTS OF SINGLE-WALLED CARBON NANOTUBES ON THE CRYSTALLIZATION BEHAVIOR OF POLYPROPYLENE , 2003 .

[20]  Y. Mai,et al.  Structural properties and mechanical behavior of injection molded composites of polypropylene and sisal fiber , 2002 .

[21]  S. Salvi,et al.  Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization , 2002 .

[22]  T. Kotaka,et al.  A House of Cards Structure in Polypropylene/Clay Nanocomposites under Elongational Flow , 2001 .

[23]  N. Gupta,et al.  Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy , 2001 .

[24]  E. Mäder,et al.  Nucleation activity of glass fibers towards iPP evaluated by DSC and polarizing light microscopy , 2001 .

[25]  Ramasubramania Iyer,et al.  Power station fly ash : a review of value-added utilization outside of the construction industry , 2001 .

[26]  M. François,et al.  Characterization of magnetite in silico-aluminous fly ash by SEM, TEM, XRD, magnetic susceptibility, and Mössbauer spectroscopy , 1999 .

[27]  A. J. Lovinger,et al.  Structure and morphology of poly(propylenes): a molecular analysis , 1996 .

[28]  E. Paparazzo.  On the XPS Analysis of Si–OH Groups at the Surface of Silica , 1996 .

[29]  L. S. Tan,et al.  The role of particle size and polymer molecular weight in the formation and properties of an organo-ceramic composite , 1996, Journal of Materials Science.

[30]  C. Demanet.  Atomic force microscopy determination of the topography of fly-ash particles , 1995 .

[31]  A. Hiltner,et al.  The ductile‐to‐quasi‐brittle transition of particulate‐filled thermoplastic polyester , 1994 .

[32]  Toshio Kurauchi,et al.  Mechanical properties of nylon 6-clay hybrid , 1993 .

[33]  Toshio Kurauchi,et al.  Synthesis of nylon 6-clay hybrid , 1993 .

[34]  S. Bandyopadhyay.  Review of the microscopic and macroscopic aspects of fracture of unmodified and modified epoxy resins , 1990 .

[35]  C. K. Riew.  Rubber-toughened plastics , 1989 .

[36]  D. Bigg.  Mechanical properties of particulate filled polymers , 1987 .

[37]  Robert J. Young,et al.  Crack propagation in a glass particle-filled epoxy resin , 1984 .

[38]  S. Bandyopadhyay,et al.  Environmental stress cracking of low molecular weight high density polyethylene , 1981 .

[39]  S. Pratsinis,et al.  OH Surface Density of SiO 2 and TiO 2 by Thermogravimetric Analysis , 2003 .

[40]  R. Li,et al.  Mechanical behavior of CaCO3 particulate-filled β-crystalline phase polypropylene composites , 1997 .

[41]  P. Järvelä.  Multicomponent compounding of polypropylene , 1996, Journal of Materials Science.

[42]  R. Truss,et al.  Effect of flyash content and coupling agent on the mechanical properties of flyash-filled polypropylene , 1994 .

[43]  Guo Qipeng,et al.  The β-crystalline form of wollastonite-filled polypropylene , 1990 .

[44]  L. Nielsen.  Simple theory of stress-strain properties of filled polymers† , 1966 .