Simulation of continuum electrical conduction and Joule heating using DEM domains

Summary This paper proposes an original method to simulate the electrical conduction in continuums with the Discrete Element Method (DEM). The proposed method is based on the graphs theory applied to electrical resistance network, where the resistance between two discrete elements is estimated through the notion of ‘transmission surface’ to assume the discrete domain as a continuous medium. In addition to the electrical conduction, the Joule heating of a DEM domain has also been developed to take full advantage of the electrical conduction. The proposed method has been implemented in the free DEM software named ‘GranOO’. The numerical results were compared against analytical approaches when applicable, or against Finite Element Method if the geometries become more complex or in case of dynamic loadings. The results are found satisfactory with errors around 3% for the electrical conduction and Joule heating of reasonably complex domains and loading cases. When it comes to more complex domains, such as electrical constriction, whilst the results remain close to those obtained with reference solutions (around 6%), they highlight the importance of taking care about the domains discretization. Finally, the proposed method is applied to detect cracks onset on a cylindrical rod torsion test to show how to take advantage of the proposed work. Copyright © 2016 John Wiley & Sons, Ltd.

[1]  J. L. Finney,et al.  Random packings and the structure of simple liquids. I. The geometry of random close packing , 1970, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2]  Xuemei Liu,et al.  Neck Formation and Self-Adjusting Mechanism of Neck Growth of Conducting Powders in Spark Plasma Sintering , 2006 .

[3]  Jérôme Néauport,et al.  The GranOO workbench, a new tool for developing discrete element simulations, and its application to tribological problems , 2014, Adv. Eng. Softw..

[4]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[5]  I. Iordanoff,et al.  3D Discrete Element Workbench for Highly Dynamic Thermo-mechanical Analysis: GranOO , 2015 .

[6]  I. TERREROSa,et al.  Simulation of continuum heat conduction using DEM domains , 2018 .

[7]  I. Iordanoff,et al.  Thermal Study of the Dry Sliding Contact With Third Body Presence , 2008 .

[8]  Michael E. Plesha,et al.  Discrete element method for modelling solid and particulate materials , 2007 .

[9]  Erik Schlangen,et al.  Experimental and numerical analysis of micromechanisms of fracture of cement-based composites , 1992 .

[10]  Gilbert Strang,et al.  Computational Science and Engineering , 2007 .

[11]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[12]  M. Renouf,et al.  Numerical investigation on the electrical transmission ability of a shearing powder layer , 2016 .

[13]  T. Mah,et al.  Current Isolation in Spark Plasma Sintering of Conductive and Nonconductive Ceramics , 2008 .

[14]  E. Dreizin,et al.  Electrical conductivity of a metal powder struck by a spark , 2012 .

[15]  Mathieu Renouf,et al.  Coupling electrical and mechanical effects in discrete element simulations , 2008 .

[16]  Valéry Bourny,et al.  DEM ball bearing model and defect diagnosis by electrical measurement , 2013 .

[17]  Jérôme Néauport,et al.  Discrete element method to simulate continuous material by using the cohesive beam model , 2012 .

[18]  J. Jerier,et al.  Normal contact between rough surfaces by the Discrete Element Method , 2012 .

[19]  W. Zhou,et al.  Numerical and experimental verification of a damping model used in DEM , 2016 .