Rheological aspects of blends of metallocene‐catalyzed atactic polypropylenes with bitumen

Dynamic mechanical thermal analysis (DMTA) and oscillatory flow measurements are carried out to investigate the rheological properties of 70/30 blends of a bitumen with metallocene catalyzed atactic polypropylenes. DMTA results indicate that saturated liquid resins of the bitumen act as a plasticizer on polypropylene. The glass transition temperature of polypropylene decreases, and the pure bitumen broad relaxation disappears, which signifies that a polypropylene-saturated resin mixture constitutes the continuous phase. Such results are not obtained when a conventional atactic polypropylene is used in the blend. Oscillatory flow measurements show a viscosity reduction of the blends with respect to pure polypropylene, beyond what could be expected from a simple additive rule, reflecting the plasticization of polypropylene. One of the blends displays a viscoplastic behavior at low frequency, which is attributed to the presence of small crystals, formed on cooling from the mixing temperature. Some viscoelastic properties related to the use of these materials as roofing membranes are analyzed. Polym. Eng. Sci. 44:1792–1799, 2004. © 2004 Society of Plastics Engineers.

[1]  William W. Graessley.  The Entanglement Concept in Polymer Rheology , 1974 .

[2]  K. Oba,et al.  Dynamic mechanical properties of single-ply roof coverings for low-slope roofs and the influence of water , 1993 .

[3]  J. Martínez-Salazar,et al.  Novel features of the rheological behaviour of metallocene catalysed atactic polypropylene , 2003 .

[4]  H. Münstedt,et al.  Long-Chain Branching in Metallocene-Catalyzed Polyethylenes Investigated by Low Oscillatory Shear and Uniaxial Extensional Rheometry , 2002 .

[5]  A. Isayev,et al.  Crystallization and Microstructure of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes: Simulation and Experiment , 1999 .

[6]  R. H. Boyd.  Relaxation processes in crystalline polymers: experimental behaviour — a review , 1985 .

[7]  Carlo Giavarini,et al.  Production of stable polypropylene-modified bitumens , 1996 .

[8]  G. McNally,et al.  An attempt at engineering the bulk properties of blends of a bitumen with polymers. , 2002 .

[9]  Tony McNally,et al.  Blends of Bitumen with Various Polyolefins , 2000 .

[10]  N. Hadjichristidis,et al.  Well-Defined, Model Long Chain Branched Polyethylene. 2. Melt Rheological Behavior , 2002 .

[11]  F. Martínez-Boza,et al.  Rheological Techniques as a Tool To Analyze Polymer−Bitumen Interactions: Bitumen Modified with Polyethylene and Polyethylene-Based Blends , 2002 .

[12]  C. Friedrich,et al.  Van Gurp-Palmen Plot II – classification of long chain branched polymers by their topology , 2002 .

[13]  M. E. Muñoz,et al.  Thermorheological analysis of PVC blends , 2000 .

[14]  A. Amash,et al.  Thermal and dynamic mechanical investigations on fiber-reinforced polypropylene composites , 1997 .

[15]  A. Ajji,et al.  Rheology and phase separation in polystyrene/poly(vinyl methyl ether) blends , 1988 .

[16]  Martin Hugener,et al.  Characterization of polymer modified bituminous roofing membranes using chromatography , 1995 .

[17]  K. Cole,et al.  Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics , 1941 .

[18]  R. Mülhaupt,et al.  Determination of Plateau Moduli and Entanglement Molecular Weights of Isotactic, Syndiotactic, and Atactic Polypropylenes Synthesized with Metallocene Catalysts , 1998 .

[19]  A. Kellomäki,et al.  Miscibilities of polymers in bitumen and tall oil pitch under different mixing conditions , 1996 .

[20]  D. Plazek.  1995 BINGHAM MEDAL ADDRESS : OH, THERMORHEOLOGICAL SIMPLICITY, WHEREFORE ART THOU ? , 1996 .

[21]  J. Planche,et al.  A structure‐related model to describe asphalt linear viscoelasticity , 1996 .

[23]  C. Giavarini,et al.  Shifting the bitumen structure from sol to gel , 1999 .

[24]  H. Mavridis,et al.  Temperature dependence of polyolefin melt rheology , 1992 .