PixFEL: Enabling technologies, building blocks and architectures for advanced X-ray pixel cameras at the next generation FELs

The PixFEL project is conceived as the first stage of a long term research program aiming at the development of advanced instrumentation for coherent X-ray diffractive imaging applications at the next generation free electron laser (FEL) facilities. The project aims at substantially advancing the state-of-the-art in the field of 2D X-ray imaging through the adoption of cutting-edge microelectronic technologies and innovative design and architectural solutions. For this purpose, the collaboration is developing the fundamental microelectronic building blocks (low noise analog front-end with dynamic compression feature, high resolution, low power ADC, high density memories) and investigating and implementing the enabling technologies (active edge pixel sensors, high density and low density through silicon vias) for the assembly of a multilayer four side buttable tile. The building block design is being carried out in a 65 nm CMOS technology. The ambitious goal of the research program is the fabrication of an X-ray camera with single photon resolution, 1 to 104 photons @ 1 keV to 10 keV input dynamic range, 1 kevent in-pixel memory, 100 μm pixel pitch, and the capability to be operated at the fast (1 MHz or larger) rates foreseen for the future X-ray FEL machines.

[1]  Richard A. London,et al.  ULTRAFAST COHERENT DIFFRACTION IMAGING WITH X-RAY FREE- ELECTRON LASERS* , 2006 .

[2]  Pedro M. Figueiredo,et al.  Kickback noise reduction techniques for CMOS latched comparators , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  Heinz Graafsma,et al.  Requirements for and development of 2 dimensional X-ray detectors for the European X-ray Free Electron Laser in Hamburg , 2009 .

[4]  Sanjay Raman,et al.  Large-signal analysis of MOS varactors in CMOS -G/sub m/ LC VCOs , 2003 .

[5]  Garth J. Williams,et al.  Single mimivirus particles intercepted and imaged with an X-ray laser , 2011, Nature.

[6]  Carlo Fiorini,et al.  A fast current readout strategy for the XFEL DePFET detector , 2010 .

[7]  Georg Weidenspointner,et al.  Development of the DEPFET Sensor With Signal Compression: A Large Format X-Ray Imager With Mega-Frame Readout Capability for the European XFEL , 2011, IEEE Transactions on Nuclear Science.

[8]  Robert Klanner,et al.  Investigation of X-ray induced radiation damage at the Si-SiO2 interface of silicon sensors for the European XFEL , 2012, 1210.0427.

[9]  Qun Shen,et al.  Diffractive imaging of nonperiodic materials with future coherent X-ray sources. , 2004, Journal of synchrotron radiation.

[10]  S. Parker,et al.  Results from 3-D silicon sensors with wall electrodes: near-cell-edge sensitivity measurements as a preview of active-edge sensors , 2001 .

[11]  Behzad Razavi,et al.  Design Considerations for Interleaved ADCs , 2013, IEEE Journal of Solid-State Circuits.

[12]  Jae-Yoon Sim,et al.  A Digital-Domain Calibration of Split-Capacitor DAC for a Differential SAR ADC Without Additional Analog Circuits , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[13]  Luca Lodola,et al.  Design and TCAD simulations of planar active-edge pixel sensors for future XFEL applications , 2014, 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC).

[14]  Jianwei Miao,et al.  Taking X-ray diffraction to the limit: macromolecular structures from femtosecond X-ray pulses and diffraction microscopy of cells with synchrotron radiation. , 2004, Annual review of biophysics and biomolecular structure.

[15]  Alvise Bagolini,et al.  Development of active and slim edge terminations for 3D and planar detectors , 2011, 2011 IEEE Nuclear Science Symposium Conference Record.