The influence of inter-ply friction during double-diaphragm forming of biaxial NCFs

[1]  F. Yu,et al.  Investigation into the effects of inter-ply sliding during double diaphragm forming for multi-layered biaxial non-crimp fabrics , 2021 .

[2]  F. Yu,et al.  Double diaphragm forming simulation using a global-to-local modelling strategy for detailed defect detection in large structures , 2021 .

[3]  H. Kim,et al.  Study on inter-ply friction between woven and unidirectional prepregs and its effect on the composite forming process , 2021, Composite Structures.

[4]  R. Vaziri,et al.  Orientation Dependency and Hysteresis Nature of Inter-Ply Friction in Woven Fabrics , 2021, Applied Composite Materials.

[5]  S. Hallett,et al.  Modelling defect formation in textiles during the double diaphragm forming process , 2020, Composites Part B: Engineering.

[6]  F. Yu,et al.  A macroscale finite element approach for simulating the bending behaviour of biaxial fabrics , 2020 .

[7]  A. Milani,et al.  Experimental characterization of the inter-ply shear behavior of dry and prepreg woven fabrics: Significance of mixed lubrication mode during thermoset composites processing , 2020 .

[8]  Michel Tourlonias,et al.  Influence of friction angle between carbon single fibres and tows: Experimental analysis and analytical model , 2019, Composites Part A: Applied Science and Manufacturing.

[9]  A. Milani,et al.  Analysis of inter-ply friction in consolidation process of thermoset woven prepregs , 2019, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019.

[10]  E. I. Avgoulas,et al.  Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool , 2018 .

[11]  M. Sutcliffe,et al.  DEVELOPMENT OF A COMPOSITE FORMING LIMIT DIAGRAM : A FEASIBILITY STUDY , 2018 .

[12]  P. Mitschang,et al.  Investigation of the compaction behavior of carbon fiber NCF for continuous preforming processes , 2017 .

[13]  Chokri Cherif,et al.  Active forming manipulation of composite reinforcements for the suppression of forming defects , 2017 .

[14]  S. Allaoui,et al.  Characterisation of the mesoscopic and macroscopic friction behaviours of glass plain weave reinforcement , 2017 .

[15]  D. Mulvihill,et al.  Friction of carbon fibre tows , 2017 .

[16]  A. Endruweit,et al.  Double diaphragm forming simulation for complex composite structures , 2017 .

[17]  A. Endruweit,et al.  Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern , 2016 .

[18]  N. Fulleringer,et al.  Forced stick-slip oscillations allow the measurement of the friction force: Application to paper materials , 2015 .

[19]  Stephen R Hallett,et al.  Tensile failure of laminates containing an embedded wrinkle; numerical and experimental study , 2015 .

[20]  Stephen R Hallett,et al.  Compressive failure of laminates containing an embedded wrinkle; experimental and numerical study , 2015 .

[21]  S. Allaoui,et al.  Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results , 2014 .

[22]  Yan Zhao,et al.  In-plane shear investigation of biaxial carbon non-crimp fabrics with experimental tests and finite element modeling , 2014 .

[23]  P. Potluri,et al.  Effects of inter-tow angle and tow size on carbon fibre friction , 2014 .

[24]  R. Akkerman,et al.  Dry friction characterisation of carbon fibre tow and satin weave fabric for composite applications , 2014 .

[25]  C. Mattei,et al.  An experimental study of mechanisms behind wrinkle development during forming of composite laminates , 2013 .

[26]  James A. Sherwood,et al.  Characterization of the tool/fabric and fabric/fabric friction for woven-fabric composites during the thermostamping process , 2013 .

[27]  J. Sherwood,et al.  Design of an apparatus for measuring tool/fabric and fabric/fabric friction of woven-fabric composites during the thermostamping process , 2013 .

[28]  P. Boisse,et al.  Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding , 2012 .

[29]  A. Wendling,et al.  Influence of the dry woven fabrics meso-structure on fabric/fabric contact behavior , 2012 .

[30]  Emmanuelle Vidal-Salle,et al.  Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses , 2011 .

[31]  James A. Sherwood,et al.  A friction model for thermostamping commingled glass–polypropylene woven fabrics , 2007 .

[32]  Seung‐Hwan Chang,et al.  Characterisation of material properties for draping of dry woven composite material , 2003 .

[33]  T. Chou,et al.  Compaction of woven-fabric preforms in liquid composite molding processes: single-layer deformation , 1999 .

[34]  François Robitaille,et al.  Compaction of textile reinforcements for composites manufacturing. I: Review of experimental results , 1998 .

[35]  M. Hou.  Stamp forming of continuous glass fibre reinforced polypropylene , 1997 .