Three-dimensional printing of biomimetic variable stiffness composites with controlled orientations and volume fraction of fibers

[1]  G. Steinbichler,et al.  Additively Manufactured Composite Lug with Continuous Carbon Fibre Steering Based on Finite Element Analysis , 2022, Materials.

[2]  R. Matsuzaki,et al.  Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites , 2022, Composite Structures.

[3]  A. Todoroki,et al.  3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective , 2022, Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers.

[4]  Dichen Li,et al.  Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure , 2022, Composite Structures.

[5]  Dongmin Yang,et al.  Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension , 2022, Composites Science and Technology.

[6]  J. Zhou,et al.  Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes inspired a beetle forewing , 2021, Composite Structures.

[7]  A. Le Duigou,et al.  4D printing of continuous flax-fibre based shape-changing hygromorph biocomposites: Towards sustainable metamaterials , 2021, Materials & Design.

[8]  Zhihua Wang,et al.  Design, modeling, optimization, manufacturing and testing of variable-angle filament-wound cylinders , 2021 .

[9]  I. Ashcroft,et al.  Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook , 2021 .

[10]  Guang Liu,et al.  Additive manufacturing of continuous fiber reinforced polymer composites: Design opportunities and novel applications , 2021 .

[11]  B. Fedulov,et al.  Optimization of parts manufactured using continuous fiber three-dimensional printing technology , 2021, Composites Part B: Engineering.

[12]  M. Tehrani,et al.  Experimental investigation of additively manufactured continuous fiber reinforced composite parts with optimized topology and fiber paths , 2021, Additive Manufacturing.

[13]  Jihong Zhu,et al.  Additive manufacturing of polymeric composites from material processing to structural design , 2021 .

[14]  Liang Gao,et al.  Full-scale topology optimization for fiber-reinforced structures with continuous fiber paths , 2021 .

[15]  T. Ozaki,et al.  Tensile strength of CFRP with curvilinearly arranged carbon fiber along the principal stress direction fabricated by the electrodeposition resin molding , 2021 .

[16]  Ying Yu,et al.  Design for additive manufacturing from a force-flow perspective , 2021, Materials & Design.

[17]  L. Ye,et al.  Topological design for 3D-printing of carbon fibre reinforced composite structural parts , 2021 .

[18]  Quan Wang,et al.  Load path-guided fiber trajectory in composite panels: A comparative study and a novel combined method , 2021 .

[19]  Paul M. Weaver,et al.  An isogeometric framework for the optimal design of variable stiffness shells undergoing large deformations , 2021 .

[20]  I. E. Vasil’ev,et al.  Damage and failure of unidirectional laminate by acoustic emission combined with video recording , 2021, Acta Mechanica.

[21]  J. Jelonnek,et al.  Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics , 2021, Composites Part A: Applied Science and Manufacturing.

[22]  Yoshiro Suzuki,et al.  Optimization of curvilinear fiber orientation of composite plates and its experimental validation , 2021 .

[23]  E. Demir,et al.  Additive manufacturing of compliance optimized variable stiffness composites through short fiber alignment along curvilinear paths , 2020 .

[24]  A. Todoroki,et al.  3D compaction printing of a continuous carbon fiber reinforced thermoplastic , 2020 .

[25]  Dichen Li,et al.  A constitutive model for 3D printed continuous fiber reinforced composite structures with variable fiber content , 2020 .

[26]  Guoying Dong,et al.  Design and optimization of solid lattice hybrid structures fabricated by additive manufacturing , 2020, Additive Manufacturing.

[27]  Dichen Li,et al.  Design and 3D printing of continuous fiber reinforced heterogeneous composites , 2020 .

[28]  A. Jérusalem,et al.  Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties , 2020, Materials & Design.

[29]  I. Ashcroft,et al.  Optimal orientation of fibre composites for strength based on Hashin’s criteria optimality conditions , 2020, Structural and Multidisciplinary Optimization.

[30]  Ali Yeilaghi Tamijani,et al.  Stiffness-based optimization framework for the topology and fiber paths of continuous fiber composites , 2020 .

[31]  Changyou Li,et al.  Static compression testing CFRP single-lap composited joints using X-ray μCT , 2020 .

[32]  M. Walter,et al.  Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures , 2020 .

[33]  V. Oliveri,et al.  Continuous Tow Steering around an Elliptical Cut-out in a Composite Panel , 2020, AIAA Scitech 2021 Forum.

[34]  José Humberto S. Almeida,et al.  Improving the open-hole tension characteristics with variable-axial composite laminates: Optimization, progressive damage modeling and experimental observations , 2020 .

[35]  R. Ritchie,et al.  Structural Orientation and Anisotropy in Biological Materials: Functional Designs and Mechanics , 2020, Advanced Functional Materials.

[36]  M. Yildiz,et al.  Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints , 2019, Composite Structures.

[37]  T. Nomura,et al.  Cross-section optimization of topologically-optimized variable-axial anisotropic composite structures , 2019, Composite Structures.

[38]  F. Antonov,et al.  Composite 3D printing for the small size unmanned aerial vehicle structure , 2019, Composites Part B: Engineering.

[39]  A. Safonov.  3D topology optimization of continuous fiber-reinforced structures via natural evolution method , 2019, Composite Structures.

[40]  Paul M. Weaver,et al.  Postbuckling optimisation of a variable angle tow composite wingbox using a multi-modal Koiter approach , 2019, Thin-Walled Structures.

[41]  M. Haile,et al.  The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS , 2019, Rapid Prototyping Journal.

[42]  D. Dowling,et al.  Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing , 2019, Composite Structures.

[43]  T. Ozaki,et al.  CFRP manufacturing method by using electro-activated deposition and the effect of reinforcement with carbon fiber circumferentially around the hole , 2019, Composite Structures.

[44]  Lifeng Wang,et al.  3D Printing of Biomimetic Composites with Improved Fracture Toughness , 2018, Acta Materialia.

[45]  Z. Fawaz,et al.  Curvilinear variable stiffness 3D printing technology for improved open-hole tensile strength , 2018, Additive Manufacturing.

[46]  D. Dowling,et al.  Additive manufacturing of woven carbon fibre polymer composites , 2018, Composite Structures.

[47]  Xiaoyong Tian,et al.  Programmable morphing composites with embedded continuous fibers by 4D printing , 2018, Materials & Design.

[48]  Shijie Qi,et al.  Variable Angle Tow reinforcement design for locally reinforcing an open-hole composite plate , 2018, Composite Structures.

[49]  M. Meyers,et al.  Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures , 2018, Advanced materials.

[50]  Azamat G. Tavitov,et al.  Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process , 2018, Polymers.

[51]  Y. Sheng,et al.  Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study , 2018, Composites Part B: Engineering.

[52]  Mohammad Rouhi,et al.  Design, manufacturing, and testing of a variable stiffness composite cylinder , 2018 .

[53]  K. McDonnell,et al.  Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing , 2017 .

[54]  Marc A. Meyers,et al.  Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications , 2017 .

[55]  Haibing Xu,et al.  Fiber path optimization based on a family of curves in composite laminate with a center hole , 2017 .

[56]  Liu Tengfei,et al.  Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites , 2017 .

[57]  Dichen Li,et al.  Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites , 2016 .

[58]  R. Ritchie,et al.  Bioinspired structural materials. , 2014, Nature Materials.

[59]  Samuel T. IJsselmuiden,et al.  Design of variable-stiffness composite panels for maximum buckling load , 2009 .

[60]  D. Kelly,et al.  Improving the Efficiency of Fiber Steered Composite Joints using Load Path Trajectories , 2006 .

[61]  Takashi Ishikawa,et al.  Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation) , 2005 .

[62]  K. Gliesche,et al.  Application of the tailored fibre placement (TFP) process for a local reinforcement on an “open-hole” tension plate from carbon/epoxy laminates , 2003 .

[63]  Don Kelly,et al.  On the design, manufacture and testing of trajectorial fibre steering for carbon fibre composite laminates☆ , 2000 .

[64]  P. Pedersen.  On optimal shapes in materials and structures , 2000 .

[65]  G. Duvaut,et al.  Optimization of fiber reinforced composites , 2000 .

[66]  Ya-Jung Lee,et al.  Strength of composite laminates with continuous fiber around a circular hole , 1992 .

[67]  M. W. Hyer,et al.  Use of curvilinear fiber format in composite structure design , 1991 .