Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 ☆: Part II. Engineering, technology development and application aspects

Abstract The technology of proton exchange membrane fuel cells (PEMFCs) has now reached the test-phase, and engineering development and optimization are vital in order to achieve to the next step of the evolution, i.e. the realization of commercial units. This paper highlights the most important technological progresses in the areas of (i) water and thermal management, (ii) scale-up from single cells to cell stacks, (iii) bipolar plates and flow fields, and (iv) fuel processing. Modeling is another aspect of the technological development, since modeling studies have significantly contributed to the understanding of the physico-chemical phenomena occurring in a fuel cell, and also have provided a valuable tool for the optimization of structure, geometry and operating conditions of fuel cells and stacks. The ‘quantum jumps’ in this field are reviewed, starting from the studies at the electrode level up to the stack and system size, with particular emphasis on (i) the ‘cluster–network’ model of perfluorosulfonic membranes, and the percolative dependence of the membrane proton conductivity on its water content, (ii) the models of charge and mass transport coupled to electrochemical reaction in the electrodes, and (iii) the models of water transport trough the membrane, which have been usefully applied for the optimization of water management of PEMFCs. The evolution of PEMFC applications is discussed as well, starting from the NASA’s Gemini Space Flights to the latest developments of fuel cell vehicles, including the evolutions in the areas of portable power sources and residential and building applications.

[1]  Ulrich Stimming,et al.  ELECTROPHYSICAL PROPERTIES OF POLYMER ELECTROLYTE MEMBRANES : A RANDOM NETWORK MODEL , 1997 .

[2]  R. Hornung,et al.  Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells , 1998 .

[3]  Signe Kjelstrup,et al.  Ion and water transport characteristics of Nafion membranes as electrolytes , 1998 .

[4]  Keith B. Prater,et al.  Water management and stack design for solid polymer fuel cells , 1994 .

[5]  K. Oguro,et al.  Simulation of a polymer electrolyte fuel cell electrode , 1997 .

[6]  Robert F. Savinell,et al.  Simulation studies on the fuel electrode of a H2O2 polymer electrolyte fuel cell , 1992 .

[7]  M. Watanabe,et al.  Management of the Water Content in Polymer Electrolyte Membranes with Porous Fiber Wicks , 1993 .

[8]  Ralph E. White,et al.  Mathematical Modeling of Proton‐Exchange‐Membrane Fuel‐Cell Stacks , 1997 .

[9]  Hiroyuki Uchida,et al.  Analyses of Self‐Humidification and Suppression of Gas Crossover in Pt‐Dispersed Polymer Electrolyte Membranes for Fuel Cells , 1998 .

[10]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[11]  Robert Durand,et al.  Kinetic study of electrochemical reactions at catalyst-recast ionomer interfaces from thin active layer modelling , 1994 .

[12]  P. Ekdunge,et al.  Modelling the PEM fuel cell cathode , 1997 .

[13]  R. Durand,et al.  Simulations of PEFC cathodes: an effectiveness factor approach , 1997 .

[14]  Sara Thyberg Naumann,et al.  Fuel processing of biogas for small fuel cell power plants , 1995 .

[15]  Joan M. Ogden,et al.  A comparison of hydrogen, methanol and gasoline as fuels for fuel cell vehicles: implications for vehicle design and infrastructure development , 1999 .

[16]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[17]  J. Newman,et al.  Mass Transport in Gas‐Diffusion Electrodes: A Diagnostic Tool for Fuel‐Cell Cathodes , 1998 .

[18]  R. H. Wolk,et al.  Fuel cells for homes and hospitals , 1999 .

[19]  Mark W. Verbrugge,et al.  The Effect of Temperature on the Equilibrium and Transport Properties of Saturated Poly(perfluorosulfonic acid) Membranes , 1992 .

[20]  A. A. Kornyshev,et al.  Modelling the performance of the cathode catalyst layer of polymer electrolyte fuel cells , 1998 .

[21]  D. Wilkinson,et al.  Anode water removal: A water management and diagnostic technique for solid polymer fuel cells , 1995 .

[22]  Yong Woo Rho,et al.  Mass Transport Phenomena in Proton Exchange Membrane Fuel Cells Using O 2 / He , O 2 / Ar , and O 2 / N 2 Mixtures I . Experimental Analysis , 1994 .

[23]  Richard C. Alkire,et al.  Advances in electrochemical science and engineering , 1990 .

[24]  C. Chamberlin,et al.  Modeling of Proton Exchange Membrane Fuel Cell Performance with an Empirical Equation , 1995 .

[25]  David S. Watkins,et al.  Research, Development, and Demonstration of Solid Polymer Fuel Cell Systems , 1993 .

[26]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[27]  Edson A. Ticianelli,et al.  Methods to Advance Technology of Proton Exchange Membrane Fuel Cells , 1988 .

[28]  Edson A. Ticianelli,et al.  A modelling approach to the characterization of the limiting polarization behaviour of gas diffusion electrodes , 1995 .

[29]  Supramaniam Srinivasan,et al.  Analysis of performance and of water and thermal management in proton exchange membrane fuel cells , 1995 .

[30]  A. Appleby.  The Electrochemical Engine for Vehicles , 1999 .

[31]  V. Formanski,et al.  Compact hydrogen production systems for solid polymer fuel cells , 1998 .

[32]  Pierre R. Roberge,et al.  Simulation of a 250 kW diesel fuel processor/PEM fuel cell system , 1998 .

[33]  Xianguo Li,et al.  Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell , 1999 .

[34]  Supramaniam Srinivasan,et al.  An evaluation of the macro-homogeneous and agglomerate model for oxygen reduction in PEMFCs , 1998 .

[35]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[36]  P. Aldebert,et al.  Internal hydration H2/O2 100 cm2 polymer electrolyte membrane fuel cell , 1995 .

[37]  Stanislaw E. Golunski,et al.  On-board hydrogen generation for transport applications: the HotSpot™ methanol processor , 1998 .

[38]  Keith B. Prater,et al.  Polymer electrolyte fuel cells: a review of recent developments , 1994 .

[39]  Pierre R. Roberge,et al.  Parametric modelling of the performance of a 5-kW proton-exchange membrane fuel cell stack , 1994 .

[40]  Paul Leonard Adcock,et al.  New materials for polymer electrolyte membrane fuel cell current collectors , 1999 .

[41]  W. P Teagan,et al.  Cost reductions of fuel cells for transport applications: fuel processing options , 1998 .

[42]  T. Springer,et al.  Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells , 1993 .

[43]  T. Nguyen,et al.  An Along‐the‐Channel Model for Proton Exchange Membrane Fuel Cells , 1998 .

[44]  T. Nguyen,et al.  Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells , 1998 .