Three-Dimensional Numerical Investigations of the Failure Mechanism of a Rock Disc with a Central or Eccentric Hole

The diametrical compression of a circular disc (Brazilian test) or cylinder with a small eccentric hole is a simple but important test to determine the tensile strength of rocks. This paper studies the failure mechanism of circular disc with an eccentric hole by a 3D numerical model (RFPA3D). A feature of the code RFPA3D is that it can numerically simulate the evolution of cracks in three-dimensional space, as well as the heterogeneity of the rock mass. First, numerically simulated Brazilian tests are compared with experimental results. Special attention is given to the effect of the thickness to radius ratio on the failure modes and the peak stress of specimens. The effects of the compressive strength to tensile strength ratio (C/T), the loading arc angle (2α), and the homogeneity index (m) are also studied in the numerical simulations. Secondly, the failure process of a rock disc with a central hole is studied. The effects of the ratio of the internal hole radius (r) to the radius of the rock disc (R) on the failure mode and the peak stress are investigated. Thirdly, the influence of the vertical and horizontal eccentricity of an internal hole on the initiation and propagation of cracks inside a specimen are simulated. The effect of the radius of the eccentric hole and the homogeneity index (m) are also investigated.

[1]  Gunnar Wijk.  Some new theoretical aspects of indirect measurements of the tensile strength of rocks , 1978 .

[2]  Huilin Xing,et al.  A three-dimensional numerical investigation of the fracture of rock specimens containing a pre-existing surface flaw , 2012 .

[3]  Ming Cai,et al.  Numerical Simulation Of The Brazilian Test And The Tensile Strength Of Anisotropic Rocks And Rocks With Pre-Existing Cracks , 2004 .

[4]  Yong Yu,et al.  Shape effects in the Brazilian tensile strength test and a 3D FEM correction , 2006 .

[5]  J. Napier,et al.  Observed and simulated fracture pattern in diametrically loaded discs of rock material , 2005 .

[6]  J. C. Jaeger,et al.  Fundamentals of rock mechanics , 1969 .

[7]  S. Sloan,et al.  Numerical simulation of the failure mechanism of circular tunnels in transversely isotropic rock masses , 2012 .

[8]  Martine Wevers,et al.  Experimental and numerical study of the Kaiser effect in cyclic Brazilian tests with disk rotation , 2002 .

[9]  E. A. Ripperger,et al.  Critical Stresses in a Circular Ring , 1947 .

[10]  Ka Chi Lam,et al.  Analytical and Numerical Study on the Pillar Rockbursts Mechanism , 2006 .

[11]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[12]  David J. Williams,et al.  Investigating the Effect of Cyclic Loading on the Indirect Tensile Strength of Rocks , 2011, Rock Mechanics and Rock Engineering.

[13]  D W Hobbs,et al.  An assessment of a technique for determining the tensile strength of rock , 1965 .

[14]  C. A. Tang,et al.  Numerical simulation of Brazilian disk rock failure under static and dynamic loading , 2006 .

[15]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[16]  Malcolm Mellor,et al.  MEASUREMENT OF TENSILE STRENGTH BY DIAMETRAL COMPRESSION OF DISCS AND ANNULI , 1971 .

[17]  G. Zhao,et al.  Particle manifold method (PMM): A new continuum‐discontinuum numerical model for geomechanics , 2013 .

[18]  L. G. Tham,et al.  A numerical study of the influence of heterogeneity on the strength characterization of rock under uniaxial tension , 2007 .

[19]  D. W. Hobbs,et al.  The tensile strength of rocks , 1964 .

[20]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[21]  Jian Zhao,et al.  Two-Dimensional DDA Contact Constitutive Model for Simulating Rock Fragmentation , 2012 .

[22]  Hongyuan Liu,et al.  Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading , 2011 .

[23]  Charles Fairhurst,et al.  On the validity of the ‘Brazilian’ test for brittle materials , 1964 .

[24]  I. Brodie,et al.  Measurement of the tensile strength of brittle materials , 1959 .

[25]  David J. Williams,et al.  Experimental and Numerical Studies on Determination of Indirect Tensile Strength of Rocks , 2011, Rock Mechanics and Rock Engineering.

[26]  David J. Williams,et al.  Experimental, numerical and analytical studies on tensile strength of rocks , 2012 .

[27]  Shanyong Wang,et al.  Numerical analysis of the failure process around a circular opening in rock , 2012 .

[28]  J. A. Hudson,et al.  Tensile strength and the ring test , 1969 .

[29]  Toshinori Sato,et al.  Microcrack modelling of Brazilian tensile tests with the boundary element method , 2009 .

[30]  Yong Yu,et al.  A modified Brazilian disk tension test , 2009 .

[31]  Ernian Pan,et al.  Fracture Mechanics Analysis of Cracked Discs of Anisotropic Rock Using the Boundary Element Method , 1998 .