Finite element modeling of electrically rectified piezoelectric energy harvesters

[1]  Ephrahim Garcia,et al.  Power Optimization of Vibration Energy Harvesters Utilizing Passive and Active Circuits , 2010 .

[2]  William W. Clark,et al.  Analysis of piezoelectric circular diaphragm energy harvesters for use in a pressure fluctuating system , 2010 .

[3]  D. J. Inman,et al.  Experimental and analytical parametric study of single-crystal unimorph beams for vibration energy harvesting , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Huan Xue,et al.  Broadband piezoelectric energy harvesting devices using multiple bimorphs with different operating frequencies , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  Michael J. Anderson,et al.  A resonant frequency tunable, extensional mode piezoelectric vibration harvesting mechanism , 2008 .

[6]  D. Guyomar,et al.  Toward energy harvesting using active materials and conversion improvement by nonlinear processing , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  Peter Woias,et al.  Electromagnetic vibration harvester with piezoelectrically tunable resonance frequency , 2010 .

[8]  I. C. Lien,et al.  Piezoelectric array of oscillators with respective electrical rectification , 2013, Smart Structures.

[9]  Gopinath Reddy Penamalli,et al.  An efficient vibration energy harvester with a multi-mode dynamic magnifier , 2011 .

[10]  Heath F. Hofmann,et al.  Active Piezoelectric Energy Harvesting: General Principle and Experimental Demonstration , 2009 .

[11]  Wei-Hsin Liao,et al.  Impedance Modeling and Analysis for Piezoelectric Energy Harvesting Systems , 2012, IEEE/ASME Transactions on Mechatronics.

[12]  Claude Richard,et al.  Single crystals and nonlinear process for outstanding vibration-powered electrical generators , 2006, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Yaowen Yang,et al.  Modeling and performance evaluation of a piezoelectric energy harvester with segmented electrodes , 2014 .

[14]  Quan Wang,et al.  Optimal design of a piezoelectric coupled beam for power harvesting , 2012 .

[15]  Thiago Seuaciuc-Osório,et al.  On the Reduced-order Modeling of Energy Harvesters , 2009 .

[16]  Y. Kim,et al.  Analysis of Piezoelectric Energy Harvesters of a Moderate Aspect Ratio With a Distributed Tip Mass , 2011 .

[17]  Jingang Yi,et al.  A Vibration-Based PMN-PT Energy Harvester , 2009, IEEE Sensors Journal.

[18]  Sang-Gook Kim,et al.  MEMS power generator with transverse mode thin film PZT , 2005 .

[19]  Kurt Maute,et al.  Design of Piezoelectric Energy Harvesting Systems: A Topology Optimization Approach Based on Multilayer Plates and Shells , 2009 .

[20]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[21]  Gerda Buchberger,et al.  A contribution on the optimal design of a vibrating cantilever in a power harvesting application – Optimization of piezoelectric layer distributions in combination with advanced harvesting circuits , 2013 .

[22]  S. M. Shahruz,et al.  Design of mechanical band-pass filters with large frequency bands for energy scavenging , 2006 .

[23]  Wen-Jong Wu,et al.  An improved analysis of the SSHI interface in piezoelectric energy harvesting , 2007 .

[24]  Walter Sextro,et al.  Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments , 2013 .

[25]  Wei Wang,et al.  Energy harvester array using piezoelectric circular diaphragm for rail vibration , 2014 .

[26]  Jeffrey T. Scruggs,et al.  An optimal stochastic control theory for distributed energy harvesting networks , 2009 .

[27]  Yuantai Hu,et al.  A piezoelectric power harvester with adjustable frequency through axial preloads , 2007 .

[28]  S. Lin,et al.  Piezoelectric micro energy harvesters based on stainless-steel substrates , 2013 .

[29]  P. Wright,et al.  Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload , 2006 .

[30]  Jiashi Yang,et al.  Connected Vibrating Piezoelectric Bimorph Beams as a Wide-band Piezoelectric Power Harvester , 2009 .

[31]  Yi-Chung Shu,et al.  Analysis of power output for piezoelectric energy harvesting systems , 2006 .

[32]  Wen-Jong Wu,et al.  Revisit of series-SSHI with comparisons to other interfacing circuits in piezoelectric energy harvesting , 2010 .

[33]  Albert P. Pisano,et al.  Corrugated aluminum nitride energy harvesters for high energy conversion effectiveness , 2011 .

[34]  Daniel J. Inman,et al.  An electromechanical finite element model for piezoelectric energy harvester plates , 2009 .

[35]  Marco Ferrari,et al.  Piezoelectric multifrequency energy converter for power harvesting in autonomous microsystems , 2008 .

[36]  Muhammad R. Hajj,et al.  Modeling, validation, and performance of low-frequency piezoelectric energy harvesters , 2014 .

[37]  D. Inman,et al.  A Review of Power Harvesting from Vibration using Piezoelectric Materials , 2004 .

[38]  M. G. Prasad,et al.  Towards an autonomous self-tuning vibration energy harvesting device for wireless sensor network applications , 2011 .

[39]  Norman M. Wereley,et al.  Performance Evaluation of Multi-tier Energy Harvesters Using Macro-fiber Composite Patches , 2009 .

[40]  M. F. Lumentut,et al.  Analytical techniques for broadband multielectromechanical piezoelectric bimorph beams with multifrequency power harvesting , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[41]  D. Inman,et al.  Frequency Self-tuning Scheme for Broadband Vibration Energy Harvesting , 2010 .

[42]  Meiling Zhu,et al.  Design study of piezoelectric energy-harvesting devices for generation of higher electrical power using a coupled piezoelectric-circuit finite element method , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[43]  Yi-Chung Shu,et al.  Efficiency of energy conversion for a piezoelectric power harvesting system , 2006 .

[44]  S. Olutunde Oyadiji,et al.  Modal electromechanical optimization of cantilevered piezoelectric vibration energy harvesters by geometric variation , 2014 .

[45]  S. Priya.  Modeling of electric energy harvesting using piezoelectric windmill , 2005 .

[46]  H C Lin,et al.  Analysis of an array of piezoelectric energy harvesters connected in series , 2013 .

[47]  Wen-Jong Wu,et al.  Modeling and experimental verification of synchronized discharging techniques for boosting power harvesting from piezoelectric transducers , 2009 .

[48]  Kui Yao,et al.  Fabrication of piezoelectric polymer multilayers on flexible substrates for energy harvesting , 2013 .

[49]  Jeffrey L. Kauffman,et al.  A Low-order Model for the Design of Piezoelectric Energy Harvesting Devices , 2009 .

[50]  Wei-Hsin Liao,et al.  Improved Design and Analysis of Self-Powered Synchronized Switch Interface Circuit for Piezoelectric Energy Harvesting Systems , 2012, IEEE Transactions on Industrial Electronics.

[51]  Hung-Chen Chen,et al.  Improving the Scavenged Power of Nonlinear Piezoelectric Energy Harvesting Interface at Off-Resonance by Introducing Switching Delay , 2015, IEEE Transactions on Power Electronics.

[52]  L. Gammaitoni,et al.  Nonlinear energy harvesting. , 2008, Physical review letters.

[53]  S. Lin,et al.  Fabrication and Evaluation of a MEMS Piezoelectric Bimorph Generator for Vibration Energy Harvesting , 2010 .

[54]  Alex Elvin,et al.  A Coupled Finite Element—Circuit Simulation Model for Analyzing Piezoelectric Energy Generators , 2009 .

[55]  Jae Eun Kim,et al.  Dedicated algorithm and software for the integrated analysis of AC and DC electrical outputs of piezoelectric vibration energy harvesters , 2014 .

[56]  Davide Castagnetti.  A wideband fractal-inspired piezoelectric energy converter: design, simulation and experimental characterization , 2013 .

[57]  Meiling Zhu,et al.  Analyses of power output of piezoelectric energy-harvesting devices directly connected to a load resistor using a coupled piezoelectric-circuit finite element method , 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[58]  Daniel J. Inman,et al.  Issues in mathematical modeling of piezoelectric energy harvesters , 2008 .

[59]  Salvatore Salamone,et al.  A passively tunable mechanism for a dual bimorph energy harvester with variable tip stiffness and axial load , 2012 .

[60]  Yaowen Yang,et al.  Equivalent Circuit Modeling of Piezoelectric Energy Harvesters , 2009 .

[61]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply , 2002 .

[62]  Hyun Jun Jung,et al.  Optimal design and application of a piezoelectric energy harvesting system using multiple piezoelectric modules , 2014, Journal of Electroceramics.

[63]  Jan M. Rabaey,et al.  Energy Scavenging for Wireless Sensor Networks: with Special Focus on Vibrations , 2012 .

[64]  Mickaël Lallart,et al.  An optimized self-powered switching circuit for non-linear energy harvesting with low voltage output , 2008 .

[65]  Daniel J. Inman,et al.  Electromechanical Modeling of the Low-Frequency Zigzag Micro-Energy Harvester , 2011 .

[66]  Ying Dong,et al.  Energy harvester array using piezoelectric circular diaphragm for broadband vibration , 2014 .

[67]  Renwen Chen,et al.  Design and analysis of a scalable harvesting interface for multi-source piezoelectric energy harvesting , 2014 .

[68]  I. C. Lien,et al.  Array of piezoelectric energy harvesting by the equivalent impedance approach , 2012 .

[69]  Zhong Lin Wang,et al.  Microfibre–nanowire hybrid structure for energy scavenging , 2008, Nature.

[70]  M. F. Lumentut,et al.  Electromechanical finite element modelling for dynamic analysis of a cantilevered piezoelectric energy harvester with tip mass offset under base excitations , 2014 .

[71]  Daniel J. Inman,et al.  Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs , 2009 .