Measurement Model for the Maximum Strain in Beam Structures Using Multiplexed Fiber Bragg Grating Sensors

This study develops a strain measurement model for beam structures subjected to multiloading conditions by defining the strain-shape function and participation factors to overcome the limitations of strain measurements using fiber Bragg grating (FBG) strain sensors. Using the proposed model, the maximum strain in a beam is obtained by the sum of the strains caused by the different loadings acting separately. In this paper, the strain-shape functions for various loading and support conditions are provided, and a system of equations is defined to calculate the participation factors. Furthermore, the influence ratio is defined to identify the influence of each loading on the value of the total strain. The measurement model is applied to the monitoring of the maximum strain in a 4 m long steel beam subjected to two concentrated loads. For measurements during the test, seven FBG sensors and nine electric strain gauges (ESGs) were attached on the surface of the bottom flange. The experimental results indicate a good agreement between the estimated strains based on the model and the measured strains from ESGs. Furthermore, the dependency of the locations for the FBG sensors installed at the beam structure on the selection can be avoided using the measurement model.

[1]  H. M. Lee,et al.  Gage‐Free Stress Estimation of a Beam‐like Structure Based on Terrestrial Laser Scanning , 2011, Comput. Aided Civ. Infrastructure Eng..

[2]  Donghoon Kang,et al.  Full-scale test of a concrete box girder using FBG sensing system , 2008 .

[3]  Yanlei Wang,et al.  Experimental Investigation of a Self-Sensing Hybrid GFRP-Concrete Bridge Superstructure with Embedded FBG Sensors , 2012, Int. J. Distributed Sens. Networks.

[4]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[5]  Hojjat Adeli,et al.  Monitoring the behavior of steel structures using distributed optical fiber sensors , 2000 .

[6]  Hyo Seon Park,et al.  Analytical models for assessment of the safety of multi-span steel beams based on average strains from long gage optic sensors , 2007 .

[7]  Kenneth T. V. Grattan,et al.  Fiber optic sensor technology: an overview , 2000 .

[8]  Hojjat Adeli,et al.  A New Approach for Health Monitoring of Structures: Terrestrial Laser Scanning , 2007, Comput. Aided Civ. Infrastructure Eng..

[9]  Hyo Seon Park,et al.  Mathematical models for assessment of the safety of steel beams based on average strains from long gage optic sensors , 2006 .

[10]  Marek Krawczuk,et al.  Application of fibre Bragg grating sensors for structural health monitoring of an adaptive wing , 2011 .

[11]  Ralph P. Tatam,et al.  Simultaneous independent temperature and strain measurement using in-fibre Bragg grating sensors , 1996 .

[12]  Hong-Nan Li,et al.  Methodology Developments in Sensor Placement for Health Monitoring of Civil Infrastructures , 2012, Int. J. Distributed Sens. Networks.

[13]  Bin Xu,et al.  Optimization of the Geometries of Biconical Tapered Fiber Sensors for Monitoring the Early‐Age Curing Temperatures of Concrete Specimens , 2013, Comput. Aided Civ. Infrastructure Eng..

[14]  Brahim Benmokrane,et al.  Structural health monitoring of innovative bridges in Canada with fiber optic sensors , 2001 .