Direct-write assembly of microperiodic planar and spanning ITO microelectrodes.

Printed Sn-doped In(2)O(3) (ITO) microelectrodes are fabricated by direct-write assembly of sol-gel inks with varying concentration. This maskless, non-lithographic approach provides a facile route to patterning transparent conductive features in planar arrays and spanning architectures.

[1]  M. Ferenets,et al.  Thin Solid Films , 2010 .

[2]  Yi Cui,et al.  Highly conductive paper for energy-storage devices , 2009, Proceedings of the National Academy of Sciences.

[3]  J. Lewis,et al.  Two- and three-dimensional folding of thin film single-crystalline silicon for photovoltaic power applications , 2009, Proceedings of the National Academy of Sciences.

[4]  J. Lewis,et al.  Self‐Healing Materials with Interpenetrating Microvascular Networks , 2009 .

[5]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[6]  Dongmei Cui,et al.  Supplementary Material (ESI) for Chemical Communications , 2009 .

[7]  John A Rogers,et al.  Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs. , 2008, Nature materials.

[8]  U. Schubert,et al.  Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates , 2008 .

[9]  Claudia N. Hoth,et al.  High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends , 2007 .

[10]  Mariusz Twardowski,et al.  Sol‐Gel Inks for Direct‐Write Assembly of Functional Oxides , 2007 .

[11]  Placid Mathew Ferreira,et al.  Printable Single‐Crystal Silicon Micro/Nanoscale Ribbons, Platelets and Bars Generated from Bulk Wafers , 2007 .

[12]  Yu-Jen Chang,et al.  A General Route to Printable High‐Mobility Transparent Amorphous Oxide Semiconductors , 2007 .

[13]  Sunho Jeong,et al.  Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions , 2006 .

[14]  J. Cesarano,et al.  Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .

[15]  刘金明,et al.  IL-13受体α2降低血吸虫病肉芽肿的炎症反应并延长宿主存活时间[英]/Mentink-Kane MM,Cheever AW，Thompson RW，et al//Proc Natl Acad Sci U S A , 2005 .

[16]  Vivek Subramanian,et al.  Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices , 2005, Proceedings of the IEEE.

[17]  J. Lewis,et al.  Direct writing in three dimensions , 2004 .

[18]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[19]  Q. Li,et al.  Nanoparticle Inks for Directed Assembly of Three‐Dimensional Periodic Structures , 2003 .

[20]  J. Lewis,et al.  Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly , 2003, Nature materials.

[21]  I. Yamaguchi,et al.  Characterization of tin-doped indium oxide films prepared by coating photolysis process , 2002 .

[22]  J. Cesarano,et al.  Directed colloidal assembly of 3D periodic structures , 2002 .

[23]  Sawyer B. Fuller,et al.  Ink-jet printed nanoparticle microelectromechanical systems , 2002 .

[24]  Joseph Cesarano,et al.  Colloidal inks for directed assembly of 3-D periodic structures , 2002 .

[25]  Y. Sawada,et al.  Indium–tin-oxide thin films prepared by dip-coating of indium diacetate monohydroxide and tin dichloride , 2001 .

[26]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[27]  R. B. Tahar,et al.  ELECTRONIC TRANSPORT IN TIN-DOPED INDIUM OXIDE THIN FILMS PREPARED BY SOL-GEL TECHNIQUE , 1998 .

[28]  J. Jacobson,et al.  An electrophoretic ink for all-printed reflective electronic displays , 1998, Nature.

[29]  R. B. Tahar,et al.  Tin doped indium oxide thin films: Electrical properties , 1998 .

[30]  K. Nakano,et al.  Dip-coating of ITO films , 1997 .

[31]  Larry L. Hench,et al.  The sol-gel process , 1990 .

[32]  S. Shimada,et al.  Preparation and properties of tin-doped indium oxide thin films by thermal decomposition of organometallic compounds , 1986 .