Experimental Investigation on Thermal Characteristics of Heat Pipes Using Water-based MWCNT Nanofluids

In this paper, thermal characteristics of cylindrical grooved wick heat pipes with water-based MWCNT nanofluids as working medium are experimentally investigated. Volume fractions of nanoparticles are varied with 0.1% to 0.5%. Transient hot wire method developed in house is used to measure the thermal conductivity of nanofluids. It is enhanced by up to 29% compared to that of DI water. The thermal resistances and temperature distributions at the surface of the heat pipes are measured at the same evaporation temperature. The experimental results show that the thermal resistance of the heat pipes with water-based MWCNT nanofluids as working fluid is reduced up to 35.2% compared with that of heat pipe using DI water. The reduction rate of thermal resistance is greater than the enhancement rate of thermal conductivity. Finally, based on the experimental results, we present the reduction of the thermal resistances of the heat pipes compared with conventional heat pipes cannot be explained by only the thermal conductivity of water-based MWCNT nanofluids.

[1]  J. H. Kim,et al.  Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer , 2003 .

[2]  E. Grulke,et al.  Anomalous thermal conductivity enhancement in nanotube suspensions , 2001 .

[3]  A. Mujumdar,et al.  Heat transfer characteristics of nanofluids: a review , 2007 .

[4]  Kyu Hyung Do,et al.  Effect of nanofluids on the thermal performance of a flat micro heat pipe with a rectangular grooved wick , 2010 .

[5]  S. Chi.  Heat pipe theory and practice , 1976 .

[6]  Lin Lu,et al.  Thermal Performance of Axially Microgrooved Heat Pipe Using Carbon Nanotube Suspensions , 2009 .

[7]  Seok Pil Jang,et al.  Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al2O3 nanoparticles , 2008 .

[8]  Young I Cho,et al.  HYDRODYNAMIC AND HEAT TRANSFER STUDY OF DISPERSED FLUIDS WITH SUBMICRON METALLIC OXIDE PARTICLES , 1998 .

[9]  William W. Yu,et al.  ANOMALOUSLY INCREASED EFFECTIVE THERMAL CONDUCTIVITIES OF ETHYLENE GLYCOL-BASED NANOFLUIDS CONTAINING COPPER NANOPARTICLES , 2001 .

[10]  Ping-Hei Chen,et al.  Effect of structural character of gold nanoparticles in nanofluid on heat pipe thermal performance , 2004 .

[11]  E. Grulke,et al.  Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow , 2005 .

[12]  Kyu Hyung Do,et al.  Thermal resistance of screen mesh wick heat pipes using the water-based Al2O3 nanofluids , 2010 .

[13]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[14]  J. Eastman,et al.  Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles , 1999 .

[15]  Amir Faghri,et al.  Heat Pipe Science And Technology , 1995 .

[16]  Qingsong Yu,et al.  Effect of nanofluid on the heat transport capability in an oscillating heat pipe , 2006 .

[17]  Experimental investigation of thermal characteristics for a microchannel heat sink subject to an impinging jet, using a micro-thermal sensor array , 2003 .

[18]  Shung-Wen Kang,et al.  Experimental investigation of silver nano-fluid on heat pipe thermal performance , 2006 .

[19]  Shung-Wen Kang,et al.  Effect of silver nano-fluid on pulsating heat pipe thermal performance , 2008 .

[20]  Zhen-hua Liu,et al.  Heat transfer performance of a horizontal micro-grooved heat pipe using CuO nanofluid , 2008 .