Enhanced flow boiling in microchannels by self-sustained high frequency two-phase oscillations

Abstract Experimental study of flow boiling heat transfer in a microchannel array consisting of main channels connected to two auxiliary channels (each) was conducted. A microbubble-excited actuation mechanism, powered by high frequency vapor bubble growth and collapse, was established to create and sustain strong mixing in the microchannels. It was shown to significantly enhance flow boiling heat transfer in microchannels. Experimental studies were conducted at mass fluxes ranged from 150 to 480 kg/m2 s with de-ionized (DI) water as the working fluids. Compared with microchannels with inlet restrictors (IRs), the average two-phase heat transfer coefficient was improved by up to 149%. More importantly, a 71–90% reduction in pressure drop at moderate mass fluxes ranged from 400 to 1400 kg/m2 s was observed. Heat flux up to 552 W/cm2 at a mass flux of 480 kg/m2 s was demonstrated. Flow and heat transfer mechanisms were studied and discussed.

[1]  S. Kandlikar.  Scale effects on flow boiling heat transfer in microchannels: A fundamental perspective , 2010 .

[2]  Huiying Wu,et al.  Unstable and stable flow boiling in parallel microchannels and in a single microchannel , 2007 .

[3]  S. M. Ghiaasiaan,et al.  The onset of flow instability in uniformly heated horizontal microchannels , 2000 .

[4]  Ping-Hei Chen,et al.  Bubble growth and ink ejection process of a thermal ink jet printhead , 1997 .

[5]  S. Garimella,et al.  Prediction of the onset of nucleate boiling in microchannel flow , 2005 .

[6]  Satish G. Kandlikar,et al.  Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites , 2006 .

[7]  Y. Peles,et al.  Flow Boiling Instabilities in Microchannels and Means for Mitigation by Reentrant Cavities , 2008 .

[8]  P. Cheng,et al.  Effects of inlet/outlet configurations on flow boiling instability in parallel microchannels , 2008 .

[9]  Yongping Yang,et al.  Seed bubbles trigger boiling heat transfer in silicon microchannels , 2010 .

[10]  C. Pan,et al.  Two-phase flow instability for boiling in a microchannel heat sink , 2007 .

[11]  X. Dai,et al.  High frequency microbubble-switched oscillations modulated by microfluidic transistors , 2012 .

[12]  On the Nature of Critical Heat Flux in Microchannels , 2003 .

[13]  Huiying Wu,et al.  Visualization and measurements of periodic boiling in silicon microchannels , 2003 .

[14]  J. Cunningham.  History , 2007, The Journal of Hellenic Studies.

[15]  H. Takamatsu,et al.  Effects of Size and Number Density of Micro-reentrant Cavities on Boiling Heat Transfer from a Silicon Chip Immersed in Degassed and Gas-dissolved FC-72 , 1999 .

[16]  Issam Mudawar.  Assessment of high-heat-flux thermal management schemes , 2001 .

[17]  Kenneth E. Goodson,et al.  Bubble-Induced Water Hammer and Cavitation in Microchannel Flow Boiling , 2009 .

[18]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[19]  Mehmet Arik,et al.  Direct Liquid Cooling of High Flux Micro and Nano Electronic Components , 2006, Proceedings of the IEEE.

[20]  Yi-Kuen Lee,et al.  The growth and collapse of a micro-bubble under pulse heating , 2003 .

[21]  S. Spearing,et al.  Self-assembly of micro- and nanoparticles on internal micromachined silicon surfaces , 2004 .

[22]  Jinliang Xu,et al.  Static and dynamic flow instability of a parallel microchannel heat sink at high heat fluxes , 2005 .

[23]  Peter Enoksson,et al.  A Valve-Less Diffuser Micropump for Microfluidic Analytical Systems , 2001 .

[24]  I. Mudawar,et al.  Measurement and correlation of critical heat flux in two-phase microchannel heat sinks , 2004 .

[25]  Wei Zhang,et al.  Active control of flow and heat transfer in silicon microchannels , 2010 .

[26]  I. Mudawar,et al.  Measurement and prediction of pressure drop in two-phase micro-channel heat sinks , 2003 .

[27]  Huiying Wu,et al.  Boiling instability in parallel silicon microchannels at different heat flux , 2004 .

[28]  Xiaojun Quan,et al.  Recent Work on Boiling and Condensation in Microchannels , 2009 .

[29]  Ali Koşar,et al.  Cavitation Enhanced Heat Transfer in Microchannels , 2006 .

[30]  Tie-Feng Tong,et al.  Critical Heat Flux of Steady Boiling for Subcooled Water Jet Impingement on the Flat Stagnation Zone , 2004 .

[31]  A. E. Bergles,et al.  Review of two-phase flow instability , 1973 .

[32]  S. Kandlikar,et al.  Experimental Study of Flow Patterns, Pressure Drop, and Flow Instabilities in Parallel Rectangular Minichannels , 2005 .

[33]  Jinliang Xu,et al.  Seed bubbles stabilize flow and heat transfer in parallel microchannels , 2009 .

[34]  Y. Peles,et al.  Suppression of Boiling Flow Oscillations in Parallel Microchannels by Inlet , 2006 .

[35]  Ali Koşar,et al.  Boiling heat transfer in rectangular microchannels with reentrant cavities , 2005 .

[36]  Satish G. Kandlikar,et al.  Evaluation of Jet Impingement, Spray and Microchannel Chip Cooling Options for High Heat Flux Removal , 2007 .

[37]  S. Kandlikar.  History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review , 2012 .

[38]  John R. Thome,et al.  State-of-the-Art Overview of Boiling and Two-Phase Flows in Microchannels , 2006 .