Designing Self Supported SLM Structures via Topology Optimization
暂无分享,去创建一个
António Andrade-Campos | B. Barroqueiro | Robertt A. F. Valente | R. Valente | A. Andrade-Campos | B. Barroqueiro
[1] F. Martina,et al. Design for Additive Manufacturing , 2019 .
[2] M. Bendsøe. Optimal shape design as a material distribution problem , 1989 .
[3] Martin Leary,et al. Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures , 2014 .
[4] Xujing Yang,et al. Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion , 2018 .
[5] M. Bendsøe,et al. Topology Optimization: "Theory, Methods, And Applications" , 2011 .
[6] F. Piller,et al. Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .
[7] Ramana V. Grandhi,et al. A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .
[8] Erwin Rauch,et al. Trends towards Distributed Manufacturing Systems and modern forms for their design , 2015 .
[9] Samuel Gomes,et al. An additive manufacturing oriented design approach to mechanical assemblies , 2018, J. Comput. Des. Eng..
[10] J. S. Zuback,et al. Additive manufacturing of metallic components – Process, structure and properties , 2018 .
[11] George I. N. Rozvany,et al. Topology optimization in structural and continuum mechanics , 2014 .
[12] Xu Guo,et al. Additive manufacturing oriented design of graded lattice structures through explicit topology optimization , 2017 .
[13] Cheng Longfei,et al. Laser Polishing of Additive Manufactured Superalloy , 2018 .
[14] Krister Svanberg,et al. Density filters for topology optimization based on the Pythagorean means , 2013 .
[15] David W. Rosen,et al. Computer-Aided Design for Additive Manufacturing of Cellular Structures , 2007 .
[16] James K. Guest,et al. Eliminating beta-continuation from Heaviside projection and density filter algorithms , 2011 .
[17] Rubén Ansola,et al. A new overhang constraint for topology optimization of self-supporting structures in additive manufacturing , 2018 .
[18] Matthijs Langelaar,et al. An additive manufacturing filter for topology optimization of print-ready designs , 2016, Structural and Multidisciplinary Optimization.
[19] A. Bandyopadhyay,et al. Laser-assisted Zr/ZrO(2) coating on Ti for load-bearing implants. , 2009, Acta biomaterialia.
[20] A. Clausen. Topology Optimization for Additive Manufacturing , 2016 .
[21] Liz Nickels,et al. AM and aerospace: an ideal combination , 2015 .
[22] I. Ashcroft,et al. Topology Optimization for Additive Manufacturing , 2011 .
[23] Christoph Klahn,et al. Design Strategies for the Process of Additive Manufacturing , 2015 .
[24] Andrew T. Gaynor,et al. Three-dimensional projection-based topology optimization for prescribed-angle self-supporting additively manufactured structures , 2018, Additive Manufacturing.
[25] Erin Komi,et al. Design for Additive Manufacturing , 2016 .
[26] Dirk Herzog,et al. Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4 , 2015 .
[27] Yanning Zhang,et al. Additive manufacturing of Ti-Si-N ceramic coatings on titanium , 2015 .
[28] Hirpa G. Lemu,et al. Design for manufacturing to design for Additive Manufacturing: Analysis of implications for design optimality and product sustainability , 2017 .
[29] James K. Guest,et al. Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design , 2016 .
[30] L. Murr,et al. Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .
[31] Andrew T. Gaynor. Topology Optimization Algorithms for Additive Manufacturing , 2015 .
[32] F. Fruggiero,et al. State of the art of additive manufacturing: Review for tolerances, mechanical resistance and production costs , 2016 .
[33] Thomas Villmann,et al. Applications of lp-Norms and their Smooth Approximations for Gradient Based Learning Vector Quantization , 2014, ESANN.
[34] Krishnan Suresh,et al. Support structure constrained topology optimization for additive manufacturing , 2016, Comput. Aided Des..
[35] R. Hague,et al. A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting , 2016 .
[36] Hadi Moztarzadeh,et al. Design and Development of an Additive Manufactured Component by Topology Optimisation , 2017 .
[37] Ming Li,et al. Self-supporting Topology Optimization for Additive Manufacturing , 2017, ArXiv.
[38] T. E. Bruns,et al. Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .
[39] G. Rozvany. Exact analytical solutions for some popular benchmark problems in topology optimization , 1998 .
[40] Frédéric Vignat,et al. Identification on Some Design Key Parameters for Additive Manufacturing: Application on Electron Beam Melting , 2013 .
[41] M. Attaran. Additive Manufacturing: The Most Promising Technology to Alter the Supply Chain and Logistics , 2017 .
[42] Matthijs Langelaar,et al. Topology optimization of 3D self-supporting structures for additive manufacturing , 2016 .
[43] Sunil C. Joshi,et al. 3D printing in aerospace and its long-term sustainability , 2015 .
[44] Xin-Lin Gao,et al. Metamaterials with negative Poisson’s ratio and non-positive thermal expansion , 2017 .
[45] K. Svanberg. The method of moving asymptotes—a new method for structural optimization , 1987 .
[46] Frédéric Vignat,et al. Designing for Additive Manufacturing , 2012 .
[47] O. Sigmund. Morphology-based black and white filters for topology optimization , 2007 .
[48] Anders Clausen,et al. Efficient topology optimization in MATLAB using 88 lines of code , 2011 .
[49] Daniel Thomas. The development of design rules for selective laser melting , 2009 .
[50] Xiaoping Qian,et al. Undercut and overhang angle control in topology optimization: A density gradient based integral approach , 2017 .
[51] K. Svanberg,et al. An alternative interpolation scheme for minimum compliance topology optimization , 2001 .
[52] Manfred Walter,et al. Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .
[53] Mary Frecker,et al. Topology Optimization Software for Additive Manufacturing: A Review of Current Capabilities and a Real-World Example , 2016, DAC 2016.
[54] Andrew A. Shapiro,et al. Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations , 2017 .
[55] Yong Huang,et al. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .
[56] Ying Liu,et al. Self-supporting structure design in additive manufacturing through explicit topology optimization , 2017 .
[57] Guido A.O. Adam,et al. Design for Additive Manufacturing—Element transitions and aggregated structures , 2014 .
[58] B. Bourdin. Filters in topology optimization , 2001 .
[59] Xiaoping Qian,et al. Topology optimization of self-supporting support structures for additive manufacturing , 2018 .
[60] Oded Amir,et al. Topology optimization for additive manufacturing: Accounting for overhang limitations using a virtual skeleton , 2017 .
[61] Ole Sigmund,et al. A 99 line topology optimization code written in Matlab , 2001 .
[62] Mohsen Attaran,et al. The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing , 2017 .
[63] Christopher B. Williams,et al. Topology Optimization for Additive Manufacturing: Considering Maximum Overhang Constraint , 2014 .
[64] Ole Sigmund,et al. On projection methods, convergence and robust formulations in topology optimization , 2011, Structural and Multidisciplinary Optimization.
[65] D. Kotoban,et al. Possibility of Multi-material Laser Cladding Fabrication of Nickel Alloy and Stainless Steel☆ , 2016 .
[66] Grégoire Allaire,et al. Structural optimization under overhang constraints imposed by additive manufacturing technologies , 2017, J. Comput. Phys..