Non-null annular subaperture stitching interferometry for aspheric test

A non-null annular subaperture stitching interferometry (NASSI), combining the subaperture stitching idea and non-null test method, is proposed for steep aspheric testing. Compared with standard annular subaperture stitching interferometry (ASSI), a partial null lens (PNL) is employed as an alternative to the transmission sphere, to generate different aspherical wavefronts as the references. The coverage subaperture number would thus be reduced greatly for the better performance of aspherical wavefronts in matching the local slope of aspheric surfaces. Instead of various mathematical stitching algorithms, a simultaneous reverse optimizing reconstruction (SROR) method based on system modeling and ray tracing is proposed for full aperture figure error reconstruction. All the subaperture measurements are simulated simultaneously with a multi-configuration model in a ray-tracing program, including the interferometric system modeling and subaperture misalignments modeling. With the multi-configuration model, full aperture figure error would be extracted in form of Zernike polynomials from subapertures wavefront data by the SROR method. This method concurrently accomplishes subaperture retrace error and misalignment correction, requiring neither complex mathematical algorithms nor subaperture overlaps. A numerical simulation exhibits the comparison of the performance of the NASSI and standard ASSI, which demonstrates the high accuracy of the NASSI in testing steep aspheric. Experimental results of NASSI are shown to be in good agreement with that of Zygo® VerifireTM Asphere interferometer.

[1]  Dong Liu,et al.  Practical methods for retrace error correction in nonnull aspheric testing. , 2009, Optics express.

[2]  John E Greivenkamp,et al.  Iterative reverse optimization procedure for calibration of aspheric wave-front measurements on a nonnull interferometer. , 2004, Applied optics.

[3]  D. Malacara.  Optical Shop Testing , 1978 .

[4]  Dong Liu,et al.  Reverse optimization reconstruction of aspheric figure error in a non-null interferometer. , 2014, Applied optics.

[5]  Katsuyuki Okada,et al.  Measurement of large plane surface shapes by connecting small-aperture interferograms , 1994 .

[6]  Dong Liu,et al.  Non-null interferometric aspheric testing with partial null lens and reverse optimization , 2009, Optical Engineering + Applications.

[7]  J E Negro.  Subaperture optical system testing. , 1984, Applied optics.

[8]  G N Lawrence,et al.  Subaperture testing of aspheres with annular zones. , 1988, Applied optics.

[9]  Tao Wei,et al.  Nonnull interferometer simulation for aspheric testing based on ray tracing. , 2011, Applied optics.

[10]  John J. Sullivan,et al.  Design of partial nulls for testing of fast aspheric surfaces , 2007, SPIE Optical Engineering + Applications.

[11]  Mauro Melozzi,et al.  Testing aspheric surfaces using multiple annular interferograms , 1993 .

[12]  Dong Liu,et al.  Non-null annular subaperture stitching interferometry for steep aspheric measurement. , 2014, Applied optics.

[13]  侯溪.  Full- aperture wavefront reconstruction from annular , 2006 .

[14]  Michael Kuchel.  Interferometric measurement of rotationally symmetric aspheric surfaces , 2007 .

[15]  Dong Liu,et al.  Practical and accurate method for aspheric misalignment aberrations calibration in non-null interferometric testing. , 2013, Applied optics.

[16]  Yang Yong-ying Tian Chao Wei Tao Zhuo Yong-mo Luo Yong-jie.  Error analysis and processing of partial compensatory aspheric testing system , 2012 .

[17]  G. Forbes,et al.  Stitching Interferometry: A Flexible Solution for Surface Metrology , 2003 .

[18]  Leslie L Deck,et al.  Model-based phase shifting interferometry. , 2014, Applied optics.

[19]  G N Lawrence,et al.  Method for subaperture testing interferogram reduction. , 1983, Optics letters.

[20]  Fermian Granados-Agustian,et al.  Testing Parabolic Surfaces with Annular Subaperture Interferograms , 2004 .

[21]  Shengyi Li,et al.  Experimental study on subaperture testing with iterative stitching algorithm. , 2008, Optics express.