Conceptual process synthesis: past and current trends

Abstract Conceptual process synthesis (CPS) is a very important issue in chemical process industries. During the last several decades, process synthesis has undergone major changes with respect to research issues as well as to the application domains. However, despite the publication of several excellent papers on process synthesis, such as Nishida et al. [AIChE J. 27 (3) (1981) 321], Westerberg [Comput. Chem. Eng. 13 (4–5) (1989) 365], and Johns [Chem. Eng. Progr. (2001) 59], there is a lack of an up-to-date overview paper devoted to the developments of conceptual process synthesis. This overview covers the main challenges and approaches in CPS that have emerged during the last two decades. This review is composed of five sections. The introduction outlines the history, milestones and development of CPS. It points out that the development of the conceptual design is carried out in the context of the three scales of process synthesis: the micro-, meso-, and macro-scale. The next section presents general design tasks. The methods, mainly knowledge-based, for solving a design problem are presented in the third section. In the fourth section, CPS is reviewed at the different scales through a discussion of the design tasks, achievements and most significant activities. The most interesting design topics are selected and discussed in more detail. Finally, this paper discusses the issues that will, possibly, dominate research into CPS in the near future.

[1]  A K Hilaly,et al.  Pollution balance: a new methodology for minimizing waste production in manufacturing processes. , 1994, Air & waste : journal of the Air & Waste Management Association.

[2]  Colin Ramshaw,et al.  Evaluation of Spinning Disk Reactor Technology for the Manufacture of Pharmaceuticals , 2000 .

[3]  Jeffrey J. Siirola,et al.  Strategic process synthesis : Advances in the hierarchical approach , 1996 .

[4]  R. L. Motard,et al.  Knod—a knowledge based approach for process design , 1988 .

[5]  D. Rudd,et al.  Computer-Aided Synthesis of Chemical Process Designs. From Reaction Path Data to the Process Task Network , 1971 .

[6]  Y. Lim,et al.  Multiobjective Optimization in Terms of Economics and Potential Environment Impact for Process Design and Analysis in a Chemical Process Simulator , 1999 .

[7]  Kishalay Mitra,et al.  Multiobjective dynamic optimization of an industrial Nylon 6 semibatch reactor using genetic algorit , 1998 .

[8]  Jianguo Xu.  Comments on “Equipartition of Forces: A New Principle for Process Design and Optimization” , 1997 .

[9]  B. Linnhoff,et al.  The design of separators in the context of overall processes , 1988 .

[10]  Li Shi-yu.  From Unit Operation to Separation Processes , 2005 .

[11]  Xiao-Ning Li,et al.  A conflict-based approach for process synthesis with wastes minimization , 2003 .

[12]  Xiao-Ning Li,et al.  Synthesis of Reactor/Separator Networks by the Conflict-based Analysis Approach , 2002 .

[13]  Nam P. Suh,et al.  Axiomatic design and concurrent engineering , 1994, Comput. Aided Des..

[14]  Peter Mizsey,et al.  Toward a more realistic overall process synthesis—the combined approach , 1990 .

[15]  G. Powers,et al.  Synthesis of system designs: III. Toward a process concept generator , 1971 .

[16]  Ignacio E. Grossmann,et al.  Integration of hierarchical decomposition and mathematical programming for the synthesis of process flowsheets , 1998 .

[17]  Lei Shi,et al.  Integrating environmental impact minimization into conceptual chemical process design — a process systems engineering review , 2000 .

[18]  Rafiqul Gani,et al.  SEPARATION PROCESS DESIGN AND SYNTHESIS BASED ON THERMODYNAMIC INSIGHTS , 1995 .

[19]  Tore Haug-Warberg.  Comments on “Equipartition of Forces: A New Principle for Process Design and Optimization” , 2000 .

[20]  Jane C. Bare,et al.  Pollution prevention with chemical process simulators: the generalized waste reduction (WAR) algorithm—full version , 1999 .

[21]  Konrad Hungerbühler,et al.  Ecological and Economic Objective Functions for Screening in Integrated Development of Fine Chemical Processes. 1. Flexible and Expandable Framework Using Indices , 1998 .

[22]  Bertrand Braunschweig,et al.  Case-base retrieval in process engineering: Supporting design by reusing flowsheets , 1996 .

[23]  W. R. Johns.  Process Synthesis: Poised for a Wider Role Software for generating process designs has made relatively limited inroads so far. But, it now is set to follow simulation and become a tool routinely used by chemical engineers , 2001 .

[24]  J. M. Douglas.  Process synthesis for waste minimization , 1992 .

[25]  Sten Bay Jørgensen,et al.  A novel framework for simultaneous separation process and product design , 2004 .

[26]  Ajay K. Ray,et al.  APPLICATIONS OF MULTIOBJECTIVE OPTIMIZATION IN CHEMICAL ENGINEERING , 2000 .

[27]  Z. Fonyó,et al.  SYNTHESIS OF HEAT EXCHANGER NETWORKS , 1982 .

[28]  G. S. Alʹtshuller,et al.  40 Principles: TRIZ Keys to Technical Innovation , 1998 .

[29]  Signe Kjelstrup,et al.  The Driving Force Distribution for Minimum Lost Work in a Chemical Reactor Close to and Far from Equilibrium. 2. Oxidation of SO2 , 1999 .

[30]  Y. Lim,et al.  Efficient Implementation of the Normal Boundary Intersection (NBI) Method on Multiobjective Optimization Problems , 2001 .

[31]  Rodolphe L. Motard,et al.  Evolutionary synthesis of separation processes , 1981 .

[32]  Xiao-Ning Li,et al.  TRIZ-Based Creative Retrofitting of Complex Distillation Processes: An Industrial Case Study , 2001 .

[33]  Kristian M. Lien,et al.  Equipartition of Forces: A New Principle for Process Design and Optimization , 1996 .

[34]  Andreas A. Linninger.  Metallurgical Process DesignA Tribute to Douglas' Conceptual Design Approach , 2002 .

[35]  Arthur W. Westerberg,et al.  A review of process synthesis , 1981 .

[36]  Jane C. Bare,et al.  Pollution prevention with chemical process simulators: The generalized waste reduction (WAR) algorithm , 1997 .

[37]  Arthur W. Westerberg,et al.  Synthesis in engineering design , 1989 .

[38]  Dick Bedeaux,et al.  The Driving Force Distribution for Minimum Lost Work in Chemical Reactors Close to and Far from Equilibrium. 1. Theory , 1999 .

[39]  Bertrand Braunschweig,et al.  REPRO: Supporting Flowsheet Design by Case-Based Retrieval , 1996, EWCBR.

[40]  Barry Crittenden,et al.  Quantitative environmental impact analysis for clean design , 1996 .

[41]  Edward L Cussler,et al.  Chemical product design , 2001 .

[42]  I. S. Gavrila,et al.  Phenomena-driven process design, a knowledge-based approach , 1996 .

[43]  Arthur W. Westerberg,et al.  A combined heuristic and evolutionary strategy for synthesis of simple separation sequences , 1977 .

[44]  Ignacio E. Grossmann,et al.  Mixed-integer programming approach for the synthesis of integrated process flowsheets , 1985 .

[45]  Kalyanmoy Deb,et al.  Muiltiobjective Optimization Using Nondominated Sorting in Genetic Algorithms , 1994, Evolutionary Computation.

[46]  James M. Douglas,et al.  Conceptual Design of Chemical Processes , 1988 .

[47]  R. L. Motard,et al.  Procedures for the initial design of chemical processing systems , 1977 .

[48]  Ajay K. Ray,et al.  Multiobjective optimization of steam reformer performance using genetic algorithm , 2000 .

[49]  Ignacio E. Grossmann,et al.  New trends in optimization-based approaches to process synthesis , 1996 .

[50]  Heriberto Cabezas,et al.  Process design for the environment: A multi-objective framework under uncertainty , 2000 .

[51]  C. Judson King.  FROM UNIT OPERATIONS TO SEPARATION PROCESSES 1 , 2000 .

[52]  Christianto Wibowo,et al.  Product-oriented process synthesis and development: Creams and pastes , 2001 .

[53]  James M. Douglas,et al.  A hierarchical decision procedure for process synthesis , 1985 .