A BOTDA with break interrogation function over 72 km sensing length.

A BOTDA with the capacity of break interrogation is proposed and demonstrated experimentally. In our configuration, coherent detection and double sideband probe method are employed to enhance the signal-to-noise ratio (SNR) and to effectively reduce nonlocal effects, respectively. Without amplification, a 72 km sensing range with 5-meter resolution and an estimated temperature uncertainty of 1.8 °C are obtained. Benefiting from the flexible optical configuration, this sensor system has the capacity of break interrogation as a coherent optical time domain reflectometry (COTDR) if there is a break in the fiber under test (FUT). The sensor achieves a dynamic range of 36 dB with a 100 m spatial resolution, which offers an excellent solution for the requisite of two-end-access in BOTDA, and significantly enhances the robustness of the sensing system.

[1]  R. Bernini,et al.  A reconstruction technique for long-range stimulated Brillouin scattering distributed fibre-optic sensors: experimental results , 2005 .

[2]  G. Bolognini,et al.  Long-range simplex-coded BOTDA sensor over 120 km distance employing optical preamplification. , 2011, Optics letters.

[3]  R. Bernini,et al.  A Simple Technique for Reducing Pump Depletion in Long-Range Distributed Brillouin Fiber Sensors , 2009, IEEE Sensors Journal.

[4]  B. Colpitts,et al.  Distributed Fiber-Optic Sensor for Dynamic Strain Measurement , 2008, IEEE Sensors Journal.

[5]  X. Bao,et al.  32-km distributed temperature sensor based on Brillouin loss in an optical fiber. , 1993, Optics letters.

[6]  Il-Bum Kwon,et al.  Strain event detection using a double-pulse technique of a Brillouin scattering-based distributed optical fiber sensor. , 2004, Optics express.

[7]  Xiaoyi Bao,et al.  Time-division multiplexing-based BOTDA over 100 km sensing length. , 2011, Optics letters.

[8]  L. Thévenaz,et al.  Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range. , 2010, Optics Letters.

[9]  X. Bao,et al.  22-km distributed temperature sensor using Brillouin gain in an optical fiber. , 1993, Optics letters.

[10]  Liang Chen,et al.  Recent Progress in Brillouin Scattering Based Fiber Sensors , 2011, Sensors.

[11]  Richard Edward Epworth,et al.  Development of a coherent OTDR instrument , 1987 .

[12]  M. Sagues,et al.  Self-Heterodyne Detection for SNR Improvement and Distributed Phase-Shift Measurements in BOTDA , 2012, Journal of Lightwave Technology.

[13]  K. Shimizu,et al.  Development of a distributed sensing technique using Brillouin scattering , 1995 .

[14]  Xiaoyi Bao,et al.  How to obtain high spectral resolution of SBS-based distributed sensing by using nanosecond pulses. , 2006, Optics express.

[15]  Fabrizio Di Pasquale,et al.  Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification. , 2011, Optics express.

[16]  R. Bernini,et al.  Long-range distributed Brillouin fiber sensors by use of an unbalanced double sideband probe. , 2011, Optics express.

[17]  S. Martín-López,et al.  Brillouin optical time-domain analysis assisted by second-order Raman amplification. , 2010, Optics Express.

[18]  Aoxiang Lin,et al.  Distributed Temperature Sensing System Based on Rayleigh Scattering BOTDA , 2011, IEEE Sensors Journal.

[19]  Pedro Corredera,et al.  Distributed Brillouin Fiber Sensor Assisted by First-Order Raman Amplification , 2010, Journal of Lightwave Technology.

[20]  H. Izumita,et al.  Fading noise reduction in coherent OTDR , 1992, IEEE Photonics Technology Letters.