Matlab-based modeling of GEM diagnostic data sequencer

This paper focuses on the model of the sequencer algorithm created in Matlab. The sequencer is used in the measurement system of 2nd generation for GEM detector. First, are described and compared two generations of the system. The article explains why sequencer is needed in the new system and presents how it works. It can collect data from many sources and send it out in unambiguous order. The model of the sequencer designed in Matlab allows adjusting its parameters to the specific process. The article explains technical aspects of the model, describes basic objects that were used to build the model. In the end, there are presented results. The sequencer is implemented in FPGA device.

[1]  Krzysztof T. Pozniak,et al.  Multichannel reconfigurable measurement system for hot plasma diagnostics based on GEM-2D detector , 2015 .

[2]  M. Scholz,et al.  Fast ADC based multichannel acquisition system for the GEM detector , 2012, Other Conferences.

[3]  M. Scholz,et al.  FPGA based charge fast histogramming for GEM detector , 2013, Other Conferences.

[4]  Krzysztof T. Pozniak,et al.  Serial data acquisition for GEM-2D detector , 2014, Other Conferences.

[5]  G. Kasprowicz,et al.  On line separation of overlapped signals from multi-time photons for the GEM-based detection system , 2015, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[6]  D. Mazon,et al.  Design of soft-X-ray tomographic system in WEST using GEM detectors , 2015 .

[7]  Krzysztof T. Pozniak,et al.  Introducing parallelism to histogramming functions for GEM systems , 2015, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[8]  K-D Zastrow,et al.  X-ray crystal spectrometer upgrade for ITER-like wall experiments at JET. , 2014, The Review of scientific instruments.