A novel proton exchange membrane fuel cell based power conversion system for telecom supply with genetic algorithm assisted intelligent interfacing converter

Abstract This paper presents the fuel cell based simple electric energy conversion system for supplying the telecommunication towers to reduce the operation and maintenance cost of telecom companies. The telecom industry is at the boom and is penetrating deep into remote rural areas having unreliable or no grid supply. The telecom industry is getting heavily dependent on a diesel generator set and battery bank as a backup for continuously supplying a base transceiver station of telecom towers. This excessive usage of backup supply resulted in increased operational expenditure, the unreliability of power supply and had become a threat to the environment. A significant development and concern of clean energy sources, proton exchange membrane fuel cell based supply for base transceiver station is proposed with intelligent interfacing unit. The necessity of the battery bank capacity is significantly reduced as compared with the earlier solutions. Further, a simple closed loop and genetic algorithm assisted controller is proposed for intelligent interfacing unit which consists of power electronic boost converter for power conditioning. The proposed genetic algorithm assisted controller would ensure the tight voltage regulation at the DC distribution bus of the base transceiver station. Also, it will provide the robust performance of the base transceiver station under telecom load variation and proton exchange membrane fuel cell output voltage fluctuations. The complete electric energy conversion system along with telecom loads is simulated in MATLAB/Simulink platform and verified theoretically. The successful implementation and the obtained results illustrate the feasibility of the proposed system for reliable operation of the telecom towers.

[1]  Shantanu Acharya,et al.  Performative analysis of an eccentric solar–wind combined system for steady power yield , 2016 .

[2]  Dipti Srinivasan,et al.  A novel tri-state boost converter with fast dynamics , 2002 .

[3]  O C Onar,et al.  Grid Interaction Operation of a Telecommunications Power System With a Novel Topology for Multiple-Input Buck-Boost Converter , 2010, IEEE Transactions on Power Delivery.

[4]  Emilio Bueno,et al.  Optimization of the photovoltaic-hydrogen supply system of a stand-alone remote-telecom application , 2009 .

[5]  M. A. Olutoye,et al.  Thermo-economic analysis of proton exchange membrane fuel cell fuelled with methanol and methane , 2016 .

[6]  Prabodh Bajpai,et al.  Hybrid renewable energy systems for power generation in stand-alone applications: A review , 2012 .

[7]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[8]  Aristide F. Massardo,et al.  Microturbine/Fuel-Cell Coupling for High-Efficiency Electrical-Power Generation , 2002 .

[9]  Ning Wang,et al.  Parameter identification of PEMFC model based on hybrid adaptive differential evolution algorithm , 2015 .

[10]  Mustafa Fazil Serincan,et al.  Reliability considerations of a fuel cell backup power system for telecom applications , 2016 .

[11]  Ke-Horng Chen,et al.  Solid-Duty-Control Technique for Alleviating the Right-Half-Plane Zero Effect in Continuous Conduction Mode Boost Converters , 2012, IEEE Transactions on Power Electronics.

[12]  G. Uma,et al.  Analysis and design of reduced order linear quadratic regulator control for three phase power factor correction using Cuk rectifiers , 2013 .

[13]  A. Rubaai,et al.  Real-Time Implementation of a Fuzzy Logic Controller for Switch-Mode Power-Stage DC–DC Converters , 2006, IEEE Transactions on Industry Applications.

[14]  N. Kumaresan,et al.  Speed sensor-less maximum power point tracking and constant output power operation of wind-driven wound rotor induction generators , 2015 .

[15]  Mihai Oproescu,et al.  Efficient energy control strategies for a Standalone Renewable/Fuel Cell Hybrid Power Source , 2015 .

[16]  Jiann-Fuh Chen,et al.  Designing a Dynamic Ramp With an Invariant Inductor in Current-Mode Control for an On-Chip Buck Converter , 2014, IEEE Transactions on Power Electronics.

[17]  Damian Giaouris,et al.  Nonlinear stability analysis and a new design methodology for a PEM fuel cell fed DC–DC boost converter , 2012 .

[18]  Muyiwa S. Adaramola,et al.  Analysis of hybrid energy systems for application in southern Ghana , 2014 .

[19]  Uday K. Chakraborty,et al.  PEM fuel cell modeling using differential evolution , 2012 .

[20]  Teuku Meurah Indra Mahlia,et al.  Characterization of PV panel and global optimization of its model parameters using genetic algorithm , 2013 .

[21]  Jesse B. Hoagg,et al.  Nonminimum-phase zeros - much to do about nothing - classical control - revisited part II , 2007, IEEE Control Systems.

[22]  Prodromos Daoutidis,et al.  Modeling and Control of a Renewable Hybrid Energy System With Hydrogen Storage , 2014, IEEE Transactions on Control Systems Technology.

[23]  Nirwan Ansari,et al.  Powering mobile networks with green energy , 2014, IEEE Wireless Communications.

[24]  Feridun Hamdullahpur,et al.  Modeling and parametric study of a methanol reformate gas-fueled HT-PEMFC system for portable power generation applications , 2015 .

[25]  Philip K. T. Mok,et al.  A Fast Fixed-Frequency Adaptive-On-Time Boost Converter With Light Load Efficiency Enhancement and Predictable Noise Spectrum , 2013, IEEE Journal of Solid-State Circuits.

[26]  P. Thounthong,et al.  Intelligent Model-Based Control of a Standalone Photovoltaic/Fuel Cell Power Plant With Supercapacitor Energy Storage , 2013, IEEE Transactions on Sustainable Energy.

[27]  V. T. Sreedevi,et al.  Boost Converter Controller Design Using Queen-Bee-Assisted GA , 2009, IEEE Transactions on Industrial Electronics.

[28]  M. Rahimi,et al.  A comparison between two methods of generating power, heat and refrigeration via biomass based Solid Oxide Fuel Cell: A thermodynamic and environmental analysis , 2016 .

[29]  G. Uma,et al.  Analysis and design of reduced-order sliding-mode controller for three-phase power factor correction using cuk rectifiers , 2013 .

[30]  Rodolfo Dufo-López,et al.  Concept development and techno-economic assessment for a solar home system using lithium-ion battery for developing regions to provide electricity for lighting and electronic devices , 2016 .

[31]  Huiqing Wen,et al.  Hybrid-mode interleaved boost converter design for fuel cell electric vehicles , 2016 .

[32]  Randy L. Haupt,et al.  Practical Genetic Algorithms , 1998 .

[33]  Rachid Outbib,et al.  Energy management for a PEMFC–PV hybrid system , 2014 .

[34]  Hugo Calleja,et al.  Metaheuristic Optimization Methods Applied to Power Converters: A Review , 2015, IEEE Transactions on Power Electronics.

[35]  Daniel Hissel,et al.  A review on DC/DC converter architectures for power fuel cell applications , 2015 .

[36]  Serge Pierfederici,et al.  Energy control of supercapacitor/fuel cell hybrid power source , 2008 .