Lithium Sulfide (Li2S)/Graphene Oxide Nanospheres with Conformal Carbon Coating as a High-Rate, Long-Life Cathode for Li/S Cells.

In recent years, lithium/sulfur (Li/S) cells have attracted great attention as a candidate for the next generation of rechargeable batteries due to their high theoretical specific energy of 2600 W·h kg(-1), which is much higher than that of Li ion cells (400-600 W·h kg(-1)). However, problems of the S cathode such as highly soluble intermediate species (polysulfides Li2Sn, n = 4-8) and the insulating nature of S cause poor cycle life and low utilization of S, which prevents the practical use of Li/S cells. Here, a high-rate and long-life Li/S cell is proposed, which has a cathode material with a core-shell nanostructure comprising Li2S nanospheres with an embedded graphene oxide (GO) sheet as a core material and a conformal carbon layer as a shell. The conformal carbon coating is easily obtained by a unique CVD coating process using a lab-designed rotating furnace without any repetitive steps. The Li2S/GO@C cathode exhibits a high initial discharge capacity of 650 mA·h g(-1) of Li2S (corresponding to the 942 mA·h g(-1) of S) and very low capacity decay rate of only 0.046% per cycle with a high Coulombic efficiency of up to 99.7% for 1500 cycles when cycled at the 2 C discharge rate.

[1]  Changhong Wang,et al.  Monodispersed sulfur nanoparticles for lithium-sulfur batteries with theoretical performance. , 2015, Nano letters.

[2]  Jung Ho Yu,et al.  Two-dimensional layered transition metal disulphides for effective encapsulation of high-capacity lithium sulphide cathodes , 2014, Nature Communications.

[3]  Feixiang Wu,et al.  Nanoporous Li2S and MWCNT-linked Li2S powder cathodes for lithium-sulfur and lithium-ion battery chemistries , 2014 .

[4]  Yi Cui,et al.  High-capacity Li2S–graphene oxide composite cathodes with stable cycling performance , 2014 .

[5]  Yi Cui,et al.  Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes , 2014 .

[6]  Wook Ki Jung,et al.  Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries , 2013, Advanced materials.

[7]  Min-Kyu Song,et al.  A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance. , 2013, Nano letters.

[8]  Wei Lu,et al.  Ultrafine Sulfur Nanoparticles in Conducting Polymer Shell as Cathode Materials for High Performance Lithium/Sulfur Batteries , 2013, Scientific Reports.

[9]  Jie Liu,et al.  Significantly improved long-cycle stability in high-rate Li-S batteries enabled by coaxial graphene wrapping over sulfur-coated carbon nanofibers. , 2013, Nano letters.

[10]  Guangyuan Zheng,et al.  High-performance hollow sulfur nanostructured battery cathode through a scalable, room temperature, one-step, bottom-up approach , 2013, Proceedings of the National Academy of Sciences.

[11]  Guangyuan Zheng,et al.  Nanostructured sulfur cathodes. , 2013, Chemical Society reviews.

[12]  Min-Kyu Song,et al.  Lithium/sulfur batteries with high specific energy: old challenges and new opportunities. , 2013, Nanoscale.

[13]  L. Archer,et al.  Lithium-sulfur battery cathode enabled by lithium-nitrile interaction. , 2013, Journal of the American Chemical Society.

[14]  Guangyuan Zheng,et al.  Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries , 2013, Nature Communications.

[15]  E. Cairns,et al.  Nanostructured Li₂S-C composites as cathode material for high-energy lithium/sulfur batteries. , 2012, Nano letters.

[16]  Jinghua Guo,et al.  Electronic structure and chemical bonding of a graphene oxide-sulfur nanocomposite for use in superior performance lithium-sulfur cells. , 2012, Physical chemistry chemical physics : PCCP.

[17]  Yi Cui,et al.  High-capacity micrometer-sized Li2S particles as cathode materials for advanced rechargeable lithium-ion batteries. , 2012, Journal of the American Chemical Society.

[18]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[19]  Xiulei Ji,et al.  Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature Communications.

[20]  L. Nazar,et al.  Advances in Li–S batteries , 2010 .

[21]  Xueping Gao,et al.  Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .

[22]  Yi Cui,et al.  New nanostructured Li2S/silicon rechargeable battery with high specific energy. , 2010, Nano letters.

[23]  Doron Aurbach,et al.  On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .

[24]  Yuriy V. Mikhaylik,et al.  Polysulfide Shuttle Study in the Li/S Battery System , 2004 .

[25]  P. T. Cunningham,et al.  Phase Equilibria in Lithium‐Chalcogen Systems II . Lithium‐Sulfur , 1971 .

[26]  E. Cairns,et al.  High-temperature batteries. , 1969, Science.

[27]  Bruno Scrosati,et al.  All Solid-State Lithium–Sulfur Battery Using a Glass-Type P2S5–Li2S Electrolyte: Benefits on Anode Kinetics , 2015 .

[28]  Bruno Scrosati,et al.  Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery , 2011 .

[29]  Emanuel Peled,et al.  Electrochemistry of a nonaqueous lithium/sulfur cell , 1983 .

[30]  J. Gladysz,et al.  New methodology for the introduction of sulfur into organic molecules , 1979 .