Numerical simulation and sensitivity analysis of heat transfer enhancement in a flat heat exchanger tube with discrete inclined ribs

[1]  Rahmat Ellahi,et al.  Numerical investigation of heat exchanger effectiveness in a double pipe heat exchanger filled with nanofluid: A sensitivity analysis by response surface methodology , 2017 .

[2]  I. A. Ghani,et al.  Heat transfer augmentation in a microchannel heat sink with sinusoidal cavities and rectangular ribs , 2017 .

[3]  Yihong He,et al.  Experimental study on the heat transfer characteristics of high blockageribs channel , 2017 .

[4]  Z. Tao,et al.  Pressure drop and heat transfer performance in a rotating two-pass channel with staggered 45-deg ribs , 2017 .

[5]  Rahmat Ellahi,et al.  Effects of wavy surface characteristics on natural convection heat transfer in a cosine corrugated square cavity filled with nanofluid , 2017 .

[6]  Mojtaba Mamourian,et al.  Numerical investigation and sensitivity analysis of effective parameters to obtain potential maximum power output: A case study on Zanjan prototype solar chimney power plant , 2017 .

[7]  K. Vafai,et al.  Numerical investigation and sensitivity analysis of effective parameters on combined heat transfer performance in a porous solar cavity receiver by response surface methodology , 2017 .

[8]  I. Pop,et al.  Sensitivity analysis for MHD effects and inclination angles on natural convection heat transfer and entropy generation of Al2O3-water nanofluid in square cavity by Response Surface Methodology , 2016 .

[9]  Rahmat Ellahi,et al.  Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow , 2016 .

[10]  Ali J. Chamkha,et al.  Numerical simulation and sensitivity analysis of effective parameters on natural convection and entropy generation in a wavy surface cavity filled with a nanofluid using RSM , 2016 .

[11]  N. Abu‐Hamdeh,et al.  Numerical simulation and sensitivity analysis of effective parameters on heat transfer and homogeneity of Al2O3 nanofluid in a channel using DPM and RSM , 2016 .

[12]  M. Mamourian,et al.  Vortex generators position effect on heat transfer and nanofluid homogeneity: A numerical investigation and sensitivity analysis , 2016 .

[13]  M. Mamourian,et al.  Two phase simulation and sensitivity analysis of effective parameters on turbulent combined heat transfer and pressure drop in a solar heat exchanger filled with nanofluid by Response Surface Methodology , 2016 .

[14]  R. Ellahi,et al.  Two phase simulation and sensitivity analysis of effective parameters on combined heat transfer and pressure drop in a solar heat exchanger filled with nanofluid by RSM , 2016 .

[15]  R. Mamat,et al.  Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes , 2016 .

[16]  O. Mesalhy,et al.  Heat transfer characteristics and entropy generation for wing-shaped-tubes with longitudinal external fins in cross-flow , 2016 .

[17]  W. Liu,et al.  Numerical investigations of the thermal-hydraulic performance in a rib-grooved heat exchanger tube based on entropy generation analysis , 2016 .

[18]  Anil Kumar,et al.  Thermohydraulic performance of rectangular ducts with different multiple V-rib roughness shapes: A comprehensive review and comparative study , 2016 .

[19]  Lei Chai,et al.  Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls , 2016 .

[20]  Mohamed A. Abdelatief,et al.  Effect of Longitudinal-External-Fins on Fluid Flow Characteristics for Wing-Shaped Tubes Bundle in Crossflow , 2015 .

[21]  H. Safikhani,et al.  Numerical study of nanofluid flow in flat tubes fitted with multiple twisted tapes , 2015 .

[22]  Mohamed A. Abdelatief,et al.  Flow and heat transfer enhancement in tube heat exchangers , 2015 .

[23]  Sandy To,et al.  Numerical and experimental analysis of heat transfer in turbulent flow channels with two-dimensional ribs , 2015 .

[24]  Seyed Hassan Hashemabadi,et al.  CFD simulation of heat transfer enhancement of Al2O3/water and Al2O3/ethylene glycol nanofluids in a car radiator , 2014 .

[25]  Bin Zhou,et al.  Numerical study and performance analyses of the mini-channel with discrete double-inclined ribs , 2014 .

[26]  Abolfazl Khalkhali,et al.  Multi-objective optimization of nanofluid flow in flat tubes using CFD, Artificial Neural Networks and genetic algorithms , 2014 .

[27]  A. Abbassi,et al.  Effects of tube flattening on the fluid dynamic and heat transfer performance of nanofluids , 2014 .

[28]  Gongnan Xie,et al.  Flow structure and heat transfer in a square passage with offset mid-truncated ribs , 2014 .

[29]  M. Saeedinia,et al.  Pressure drop and thermal characteristics of CuO–base oil nanofluid laminar flow in flattened tubes under constant heat flux , 2011 .

[30]  D. Das,et al.  Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator , 2010 .

[31]  Saltelli Andrea,et al.  Global Sensitivity Analysis: The Primer , 2008 .

[32]  Xiaowei Li,et al.  Visualization of longitudinal vortex flow in an enhanced heat transfer tube , 2007 .

[33]  Ali J. Chamkha,et al.  Increment of mixed convection heat transfer and decrement of drag coefficient in a lid-driven nanofluid-filled cavity with a conductive rotating circular cylinder at different horizontal locations: A sensitivity analysis , 2017 .

[34]  Ningbo Zhao,et al.  Numerical investigations of laminar heat transfer and flow performance of Al2O3–water nanofluids in a flat tube , 2016 .

[35]  E. Ibrahim,et al.  Augmentation of laminar flow and heat transfer in flat tubes by means of helical screw-tape inserts , 2011 .

[36]  R. Shah.  Laminar Flow Forced convection in ducts , 1978 .

[37]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .