Quartz-enhanced photoacoustic spectroscopy exploiting tuning fork overtone modes

We report on a quartz-enhanced photoacoustic sensor (QEPAS) based on a custom-made quartz tuning fork (QTF) to operate in both the fundamental and the first overtone vibrational mode resonances. The QTF fundamental mode resonance falls at ∼3 kHz and the first overtone at ∼18 kHz. Electrical tests showed that the first overtone provides a higher quality factor and increased piezoelectric current peak values, with respect to the fundamental flexural mode. To evaluate the QTF acousto-electric energy conversion efficiency, we operated the QEPAS in the near-IR and selected water vapor as the target gas. The first overtone resonance provides a QEPAS signal-to-noise ratio ∼5 times greater with respect to that measured for the fundamental mode. These results open the way to employing QTF overtone vibrational modes for QEPAS based trace gas sensing.

[1]  D. S. Dugdale,et al.  Introduction to the Mechanics of Solids , 1967 .

[2]  E. Dill,et al.  An Introduction to the Mechanics of Solids , 1972 .

[3]  H. Hosaka,et al.  DAMPING CHARACTERISTICS OF BEAM-SHAPED MICRO-OSCILLATORS , 1995 .

[4]  P. Hess,et al.  Vibrational relaxation of water vapor , 1999 .

[5]  Soo-Ho Lee,et al.  Fabrication of SMD 32.768 kHz tuning fork‐type crystals: Photolithography and selective etching of an array of quartz tuning fork resonators , 2001 .

[6]  F. Ayazi,et al.  An analytical model for support loss in micromachined beam resonators with in-plane flexural vibrations , 2003 .

[7]  A. Kosterev,et al.  Applications of quartz tuning forks in spectroscopic gas sensing , 2005 .

[8]  Frank K. Tittel,et al.  Ultrasensitive gas detection by quartz-enhanced photoacoustic spectroscopy in the fundamental molecular absorption bands region , 2005 .

[9]  J.-M. Friedt,et al.  Introduction to the quartz tuning fork , 2007 .

[10]  A. Kosterev,et al.  QEPAS methane sensor performance for humidified gases , 2008 .

[11]  Lei Dong,et al.  QEPAS spectrophones: design, optimization, and performance , 2010 .

[12]  A. Kosterev,et al.  Resonant optothermoacoustic detection: technique for measuring weak optical absorption by gases and micro-objects. , 2010, Optics letters.

[13]  Frank K. Tittel,et al.  NO trace gas sensor based on quartz-enhanced photoacoustic spectroscopy and external cavity quantum cascade laser , 2010 .

[14]  Vincenzo Spagnolo,et al.  Ppb-level detection of nitric oxide using an external cavity quantum cascade laser based QEPAS sensor. , 2011, Optics express.

[15]  Simone Borri,et al.  A quartz enhanced photo-acoustic gas sensor based on a custom tuning fork and a terahertz quantum cascade laser. , 2014, The Analyst.

[16]  Frank K. Tittel,et al.  Quartz-Enhanced Photoacoustic Spectroscopy: A Review , 2014, Sensors.

[17]  Frank K. Tittel,et al.  Analysis of the electro-elastic properties of custom quartz tuning forks for optoacoustic gas sensing , 2016 .