Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars—Part I

Concrete quality is controlled by the flow behavior of cement paste, which is related to the dispersion of cement particles. Superplasticizers (SPs) provide the possibility of a better dispersion of cement particles, thereby producing paste of higher fluidity. With the development of high strength, high performance concrete, SPs are becoming indispensable. SPs are adsorbed on the cement particles. This adsorption is uneven and depends upon the clinker composition of cement and the type of SP used. This work is focused on the study of the influence of lignosulfonic acid (LS)- and melamine sulfonic acid (SMF)-based SPs on the fluidity of mortars made with ordinary Portland (OPC), low alkali (LAC) and white cement (WC) at different water to cement ratio. It is shown that LS are more effective than SMF in providing better fluidity. Further WC has given the highest fluidity among the cements used. It is attributed to the lower C3A+C4AF and alkali content, and higher SO3 content.