论文信息 - A 1800 K furnace designed for in situ synchrotron microtomography.

A 1800 K furnace designed for in situ synchrotron microtomography.

A radiation furnace that covers the temperature range from room temperature up to 1800 K has been designed and constructed for in situ synchrotron microtomography. The furnace operates under a vacuum or under any inert gas atmosphere. The two 1000 W halogen heating lamps are water- and air-cooled. The samples are located at the focus of these lamp reflectors on a rotary feedthrough that is connected to a driving rotation stage below the furnace. The X-ray beam penetrates the furnace through two X-ray-transparent vacuum-sealed windows. Further windows can be used for temperature control, sample changing and gas inflow and outflow.

[1] J. Baruchel,et al. A 1300 K furnace for in situ X‐ray microtomography , 2003 .

[2] C. Scheuerlein,et al. On the formation of voids in internal tin Nb3Sn superconductors , 2007 .

[3] Luc Salvo,et al. In Situ X-Ray Tomography Measurements of Deformation in Cellular Solids , 2003 .

[4] John Banhart,et al. Why are metal foams stable , 2006 .

[5] M. Di Michiel,et al. Simultaneous Tomography and Diffraction Analysis of Creep Damage , 2005, Science.

[6] C. Scheuerlein,et al. Synchrotron Tomography for the Study of Void Formation in Internal Tin ${\hbox {Nb}}_{3}{\hbox {Sn}}$ Superconductors , 2007, IEEE Transactions on Applied Superconductivity.

[7] Frank Westferro,et al. High-pressure x-ray tomography microscope: Synchrotron computed microtomography at high pressure and temperature , 2005 .