Backward-Wave Oscillation Suppression in High-Power Broadband Helix Traveling-Wave Tubes

The effects of the attenuator and the pitch step and taper on suppressing the backward-wave oscillation (BWO) in high-power broadband helix traveling-wave tubes (TWTs) are analyzed by a nonlinear 1-D beam-wave interaction theory in which the effects of the variation of the angular velocity of the macroparticles along the length of circuit are considered. It is found that the incorporation of an attenuator is an effective way to improve the stability of the TWT input section, while a pitch step or taper can be used to reduce the backward-wave gain in the TWT output section without compromising the inband saturated output power. An optimized design of a high-power broadband TWT with improved BWO suppression and forward-wave saturated output power is presented. The optimized design utilizes an optimally positioned attenuator, along with positive pitch tapers in the input and output TWT sections.

[1]  G. I. Haddad,et al.  Start-oscillation conditions of tapered backward-wave oscillators , 1963 .

[2]  T. Antonsen,et al.  A three-dimensional multifrequency large signal model for helix traveling wave tubes , 2001 .

[3]  A. E. Martynyuk,et al.  Two-dimensional small signal analysis of backward-wave oscillation in a helix traveling-wave tube under Brillouin-flow, periodic permanent magnetic focusing , 2001 .

[4]  B. Nilsson,et al.  A two wave theory of traveling-wave tubes and backward-wave oscillations , 1975, IEEE Transactions on Electron Devices.

[5]  Quan Hu,et al.  Accurate large signal analysis of a wideband helix TWT using Beam Wave Interaction Simulator , 2009, 2009 IEEE International Vacuum Electronics Conference.

[6]  B. Levush,et al.  Spurious reflection of space charge fields in TWTAs , 2005, IEEE Transactions on Electron Devices.

[7]  David Chernin,et al.  "Power holes" and nonlinear forward and backward wave gain competition in helix traveling-wave tubes , 2003 .

[8]  Z. Duan,et al.  Effect of Attenuator on BWO Start Oscillation Condition in a Helix Millimeter Wave TWT Under Magnetic Focusing , 2004 .

[9]  David Chernin,et al.  Stability of traveling-wave amplifiers with reflections , 2002 .

[10]  A.F. Jacob,et al.  Simulation of the BWO Threshold Current in a Helix TWT , 2006, 2006 IEEE International Vacuum Electronics Conference held Jointly with 2006 IEEE International Vacuum Electron Sources.

[11]  H. J. Hagger,et al.  Nonlinear Electron-Wave Interaction Phenomena , 1965 .

[12]  E. Belyavskiy,et al.  Nonlinear Analyses of the Parasitic Backward-Wave Oscillation Power in the Magnetically Focused Pulsed Helix Traveling-Wave Tube Amplifier in the Absence of the Amplified Signal , 2006, IEEE Transactions on Electron Devices.

[13]  A. Jacob,et al.  Design of Helix Pitch Profile for Broadband Traveling-Wave Tubes , 2009, IEEE Transactions on Electron Devices.

[14]  W. R. Lou,et al.  Theory of relativistic backward-wave oscillators with end reflectors , 1992 .

[15]  S. K. Datta.  Backward-Wave Oscillation Criterion in a Step-Tapered Helix Travelling-Wave Tube , 2009 .

[16]  H. R. Johnson.  Backward-Wave Oscillators , 1955, Proceedings of the IRE.

[17]  Baruch Levush,et al.  Traveling-wave tube devices with nonlinear dielectric elements , 1998 .

[18]  Bin Li,et al.  High-Frequency Circuit Simulator: An Advanced Three-Dimensional Finite-Element Electromagnetic-Simulation Tool for Microwave Tubes , 2009, IEEE Transactions on Electron Devices.

[19]  J. Swegle,et al.  Starting conditions for relativistic backward wave oscillators at low currents , 1987 .

[20]  C. Kou,et al.  Linear Analysis of Traveling Wave Tubes with Nonuniform Lossy Interaction Structures , 1999 .

[21]  David Chernin,et al.  Exact treatment of the dispersion and beam interaction impedance of a thin tape helix surrounded by a radially stratified dielectric , 1999, IEEE Conference Record - Abstracts. 1999 IEEE International Conference on Plasma Science. 26th IEEE International Conference (Cat. No.99CH36297).

[22]  Shunkang Liu.  A Fast Computation of the Start-Oscillation Current of Backward Wave in MMW HTWT's , 1999 .

[23]  S. K. Datta,et al.  Large-signal analysis for BWO start condition in helix TWTs , 2003, 4th IEEE International Conference on Vacuum Electronics, 2003.

[24]  H. Heffner.  Analysis of the Backward-Wave Traveling-Wave Tube , 1954, Proceedings of the IRE.

[25]  Wenxiang Wang,et al.  Effect of attenuation on backward-wave oscillation start oscillation condition , 2004, IEEE Transactions on Plasma Science.

[26]  E. Belyavskiy,et al.  Linear two-dimensional analysis of parasitic backward-wave oscillation in a monofilar-helix traveling wave tube , 2005, IEEE Transactions on Electron Devices.

[27]  S. K. Datta,et al.  A Simple Closed-form Formula for Backward-Wave Start-Oscillation Condition for Millimeter-Wave Helix TWTs , 2008 .

[28]  Z. Duan,et al.  Suppression of In-Band Power Holes in Helix Traveling-Wave Tubes , 2011, IEEE Transactions on Electron Devices.

[29]  Quan Hu,et al.  Theory and Design of Microwave-Tube Simulator Suite , 2009, IEEE Transactions on Electron Devices.