Fabrication of concave gratings by curved surface UV-nanoimprint lithography

The authors report a new method for fabricating submicron gratings on curved substrates by combining thermoforming and nanoimprint technologies. A preshaping film was used to provide uniform pressure distribution throughout the whole concave substrate with the diameter of 60mm and the radius of curvature of 92.5mm. The concave glass could be resin coated uniformly by a conventional spin coater through the support of a soft holder. Either the preshaping film or the soft holder could be a buffer layer to prevent the curved glass from crumbling, which may result from high gas pressure during the imprint process. As for demonstration, a Rowland circle type concave grating with a period of 1.2μm was made, and the measured first order reflectance was about 20% at various wavelengths.

[1]  Shih-Chih Nian,et al.  Soft mold and gasbag pressure mechanism for patterning submicron patterns onto a large concave substrate , 2006 .

[2]  G. Whitesides,et al.  Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters , 1996, Science.

[3]  Zhenwu Lu,et al.  Lithographic fabrication of large diffractive optical elements on a concave lens surface. , 2002, Optics express.

[4]  I. V. Golubenko,et al.  Recording of concave diffraction gratings in a two-step process using spatially incoherent light , 2004 .

[5]  Michael D. Stewart,et al.  Patterning curved surfaces: Template generation by ion beam proximity lithography and relief transfer by step and flash imprint lithography , 1999 .

[6]  Zhenwu Lu,et al.  Lithographic fabrication of large curved hologram by laser writer. , 2004, Optics express.

[7]  Won Mook Choi,et al.  The fabrication of submicron patterns on curved substrates using a polydimethylsiloxane film mould , 2004 .

[8]  Wei Zhang,et al.  Air cushion press for excellent uniformity, high yield, and fast nanoimprint across a 100 mm field. , 2006, Nano letters.

[9]  Pantazis Mouroulis,et al.  Recent advances in blazed grating fabrication by electron-beam lithography , 2003, SPIE Optics + Photonics.

[10]  T Harada,et al.  Ruling engine using a piezoelectric device for large and high-groove density gratings. , 1992, Applied optics.

[11]  Jer-Haur Chang,et al.  Direct imprinting using soft mold and gas pressure for large area and curved surfaces , 2005 .