New lithographic techniques for x-ray spectroscopy

Off-plane reflection gratings require high-fidelity, custom groove profiles to perform with high spectral resolution in a Wolter-I optical system. This places a premium on exploring lithographic techniques in nanofabrication to produce state-of-the-art gratings. The fabrication recipe currently being pursued involves electron-beam lithography (EBL) and reactive ion etching (RIE) to define the groove profile, wet anisotropic etching in silicon to achieve blazed grooves and UV-nanoimprint lithography (UV-NIL) to replicate the final product. A process involving grayscale EBL and thermal reflow known as thermally activated selective topography equilibration (TASTE) is also being investigated as an alternative method to fabricate these gratings. However, a master grating fabricated entirely in soft polymeric resist through the TASTE process requires imprinting procedures other than UV-NIL to explored. A commerically available process called substrate conformal imprint lithography (SCIL) has been identified as a possible solution to this problem. SCIL also has the ability to replicate etched silicon gratings with reduced trapped air defects as compared to UV-NIL, where it is difficult to achieve conformal contact over large areas. As a result, SCIL has the potential to replace UV-NIL in the current grating fabrication recipe.

[1]  L. Baraldi,et al.  Electron beam writing of continuous resist profiles for optical applications , 1992 .

[2]  Mark L. Schattenburg,et al.  Fabrication of sawtooth diffraction gratings using nanoimprint lithography , 2003 .

[3]  S. Franssila Introduction to microfabrication , 2004 .

[4]  Webster Cash,et al.  SOFT X-RAY SPECTROSCOPY OF THE CYGNUS LOOP SUPERNOVA REMNANT , 2013 .

[5]  J. Pavkovich,et al.  Proximity effect correction calculations by the integral equation approximate solution method , 1986 .

[6]  Hannah Marlowe,et al.  Line spread functions of blazed off-plane gratings operated in the Littrow mounting , 2016, 1603.04839.

[7]  Helmut Schift,et al.  Fabrication of 3D nanoimprint stamps with continuous reliefs using dose-modulated electron beam lithography and thermal reflow , 2010 .

[8]  Robert Kirchner,et al.  Energy-based thermal reflow simulation for 3D polymer shape prediction using Surface Evolver , 2014 .

[9]  Webster Cash,et al.  X-ray performance of gratings in the extreme off-plane mount , 2004, SPIE Optics + Photonics.

[10]  Jan Haisma,et al.  Mold‐assisted nanolithography: A process for reliable pattern replication , 1996 .

[11]  D. L. Voronov,et al.  A 10,000 groove/mm multilayer coated grating for EUV spectroscopy. , 2011, Optics express.

[12]  W C Cash X-ray optics. 2: A technique for high resolution spectroscopy. , 1991, Applied optics.

[13]  H. Schift,et al.  Selective profile transformation of electron-beam exposed multilevel resist structures based on a molecular weight dependent thermal reflow , 2011 .

[14]  James Tutt,et al.  First results from a next-generation off-plane X-ray diffraction grating , 2013, 1301.5531.

[15]  Webster Cash,et al.  The EXOS sounding rocket payload , 2009, Optical Engineering + Applications.

[16]  Helmut Schift,et al.  Combining nanoimprint lithography and a molecular weight selective thermal reflow for the generation of mixed 3D structures , 2011 .

[17]  Robert Kirchner,et al.  ZEP520A - A resist for electron-beam grayscale lithography and thermal reflow , 2016 .

[18]  N. Gadegaard,et al.  Direct stamp fabrication for NIL and hot embossing using HSQ , 2007 .

[19]  Larry L. Hench,et al.  The sol-gel process , 1990 .

[20]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[21]  Randall L. McEntaffer,et al.  First results from the OGRESS sounding rocket payload , 2015, SPIE Optical Engineering + Applications.

[22]  M. Verschuuren,et al.  Substrate conformal imprint lithography for nanophotonics , 2010 .

[23]  W. Cash,et al.  X-ray spectrographs using radial groove gratings. , 1983, Applied optics.

[24]  C. Lu,et al.  Interference lithography: a powerful tool for fabricating periodic structures , 2010 .

[25]  Webster Cash,et al.  The CODEX sounding rocket payload , 2011, Optics + Optoelectronics.

[26]  Yifang Chen,et al.  Nanofabrication by electron beam lithography and its applications , 2015 .

[27]  Susumu Namba,et al.  Blazed Ion-etched Holographic Gratings , 1976 .

[28]  Robert Kirchner,et al.  Novel 3D micro- and nanofabrication method using thermally activated selective topography equilibration (TASTE) of polymers , 2014, Nano Convergence.

[29]  Mark L. Schattenburg,et al.  Super-smooth x-ray reflection grating fabrication , 1997 .

[30]  A. Yi,et al.  A reflow process for glass microlens array fabrication by use of precision compression molding , 2008 .

[31]  S. Chou,et al.  Nanoimprint Lithography , 2010 .

[32]  Randall L. McEntaffer,et al.  Analytical alignment tolerances for off-plane reflection grating spectroscopy , 2013 .

[33]  Mark L. Schattenburg,et al.  High fidelity blazed grating replication using nanoimprint lithography , 2004 .

[34]  Thomas K. Gaylord,et al.  Multi-Beam Interference Advances and Applications: Nano-Electronics, Photonic Crystals, Metamaterials, Subwavelength Structures, Optical Trapping, and Biomedical Structures , 2011, Micromachines.