Experimental and Simulation Investigations on the Morphology of Aerosol Jet Printed Polymer Traces Under In-Situ Uv and Thermal Curing Conditions

[1]  M. Yamamura.  Reaction-driven solvent transport in UV-curable phase-separating coatings , 2022, Journal of Coatings Technology and Research.

[2]  Prahalada K. Rao,et al.  Numerical and Experimental Investigation of Aerosol Jet Printing , 2022, Additive Manufacturing.

[3]  M. Poliks,et al.  Printed Electronics for Extreme High Temperature Environments , 2022, Additive Manufacturing.

[4]  Nicholas X. Williams,et al.  Aerosol Jet Printing of SU-8 as a Passivation Layer Against Ionic Solutions , 2022, Journal of Electronic Materials.

[5]  Ju-Hong Lee,et al.  A Novel UV-Curable Acryl-Polyurethane for Flexural 3D Printing Architectures , 2022, Additive Manufacturing.

[6]  Eric A. Yttri,et al.  Recent Advances in 3D Printing of Biomedical Sensing Devices , 2021, Advanced functional materials.

[7]  M. Koç,et al.  Vat photopolymerization of polymers and polymer composites: Processes and applications , 2021, Additive Manufacturing.

[8]  C. Yan,et al.  3D‐Printed Anisotropic Polymer Materials for Functional Applications , 2021, Advanced materials.

[9]  R. Hague,et al.  Modelling the influence of UV curing strategies for optimisation of inkjet based 3D printing , 2021 .

[10]  E. Secor.  Light scattering measurements to support real-time monitoring and closed-loop control of aerosol jet printing , 2021 .

[11]  G. Lu,et al.  Fully printed resonance-free broadband conical inductors using engineered magnetic inks , 2021 .

[12]  Qingshen Jing,et al.  3D-printed hierarchical pillar array electrodes for high-performance semi-artificial photosynthesis , 2021, Nature Materials.

[13]  David Yoo,et al.  Mapping drift in morphology and electrical performance in aerosol jet printing , 2021, Progress in Additive Manufacturing.

[14]  Mohammad Mahdi Emami,et al.  Modeling of light field effect in deep vat polymerization for grayscale lithography application , 2020 .

[15]  J. Papapolymerou,et al.  A Chip-First Microwave Package Using Multimaterial Aerosol Jet Printing , 2020, IEEE Transactions on Microwave Theory and Techniques.

[16]  Leonard W. T. Ng,et al.  Hexagonal Boron Nitride–Enhanced Optically Transparent Polymer Dielectric Inks for Printable Electronics , 2020, Advanced functional materials.

[17]  A. Mikos,et al.  Polymeric Systems for Bioprinting. , 2020, Chemical reviews.

[18]  D. Drummer,et al.  Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC , 2020, Polymers.

[19]  Shayandev Sinha,et al.  3D Printed Microdroplet Curing: Unravelling the Physics of On-Spot Photopolymerization , 2020 .

[20]  Daniel R. Hines,et al.  Direct-write printed broadband inductors , 2019 .

[21]  Michael S. Triantafyllou,et al.  A stabilized phase-field method for two-phase flow at high Reynolds number and large density/viscosity ratio , 2019, J. Comput. Phys..

[22]  I. Gouzman,et al.  3D Printing of Bismaleimides: From New Ink Formulation to Printed Thermosetting Polymer Objects , 2019, Advanced Materials Technologies.

[23]  D. Fang,et al.  Mechanics of shape distortion of DLP 3D printed structures during UV post-curing. , 2019, Soft matter.

[24]  Russell A. Harris,et al.  A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing , 2019, The International Journal of Advanced Manufacturing Technology.

[25]  Mauro Serpelloni,et al.  Support-Material-Free Microfluidics on an Electrochemical Sensors Platform by Aerosol Jet Printing , 2019, Sensors.

[26]  Yeon Sik Choi,et al.  Freestanding Functional Structures by Aerosol‐Jet Printing for Stretchable Electronics and Sensing Applications , 2019, Advanced Materials Technologies.

[27]  S. Mhaske,et al.  Development of tri-functional biobased reactive diluent from ricinoleic acid for UV curable coating application , 2018, Industrial Crops and Products.

[28]  Siddhartha Das,et al.  The Effect of Droplet Sizes on Overspray in Aerosol‐Jet Printing , 2018 .

[29]  E. Secor.  Principles of aerosol jet printing , 2018, Flexible and Printed Electronics.

[30]  Daniel R. Hines,et al.  Aerosol‐Jet Printed Fillets for Well‐Formed Electrical Connections between Different Leveled Surfaces , 2017 .

[31]  Siddhartha Das,et al.  Inkwells for on-demand deposition rate measurement in aerosol-jet based 3D printing , 2017 .

[32]  P. Jain,et al.  3D printed polymer dielectric substrates with enhanced permittivity by nanoclay inclusion , 2017 .

[33]  Rahul Panat,et al.  Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing , 2017, Science Advances.

[34]  Michael Smith,et al.  Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronics , 2017 .

[35]  Jae-Won Choi,et al.  Effect of degree of crosslinking and polymerization of 3D printable polymer/ionic liquid composites on performance of stretchable piezoresistive sensors , 2017 .

[36]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[37]  Yue Ping Zhang,et al.  Inkjet-printed patch antenna emitter for wireless communication application , 2016 .

[38]  Ben Wang,et al.  Low-Loss 3-D Multilayer Transmission Lines and Interconnects Fabricated by Additive Manufacturing Technologies , 2016, IEEE Transactions on Microwave Theory and Techniques.

[39]  Sang-Young Lee,et al.  All-inkjet-printed, solid-state flexible supercapacitors on paper , 2016 .

[40]  Lijun Wu,et al.  Comparative study of waste heat steam SRC, ORC and S-ORC power generation systems in medium-low temperature , 2016 .

[41]  Alexandra L. Rutz,et al.  A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels , 2015, Advanced materials.

[42]  Jonas de Carvalho,et al.  Development of acrylate-based material using a multivariable approach: additive manufacturing applications , 2014 .

[43]  Frederik Vogeler,et al.  An Initial Study of Aerosol Jet ® Printed Interconnections on Extrusion-Based 3D-Printed Substrates , 2013 .

[44]  Il Moon,et al.  Advances in diesel–alcohol blends and their effects on the performance and emissions of diesel engines , 2013 .

[45]  J. Nie,et al.  Photopolymerization kinetics and volume shrinkage of 1,6-hexanediol diacrylate at different temperature , 2013 .

[46]  M. Wörner.  Numerical modeling of multiphase flows in microfluidics and micro process engineering: a review of methods and applications , 2012 .

[47]  Kazuhito Hashimoto,et al.  Preparation of active layers in polymer solar cells by aerosol jet printing. , 2011, ACS applied materials & interfaces.

[48]  Yong Chen,et al.  Fabrication of a 3D nanoscale crossbar circuit by nanotransfer-printing lithography. , 2010, Small.

[49]  Bing-Yang Cao,et al.  Molecular Momentum Transport at Fluid-Solid Interfaces in MEMS/NEMS: A Review , 2009, International journal of molecular sciences.

[50]  H. Thomas Hahn,et al.  Inkjet printed electronics for multifunctional composite structure , 2009 .

[51]  Peter M. Johnson,et al.  Alkyl chain length effects on copolymerization kinetics of a monoacrylate with hexanediol diacrylate. , 2007, Journal of combinatorial chemistry.

[52]  L. Nicolais,et al.  Curing kinetics and chemorheology of epoxy/anhydride system , 2003 .

[53]  C. Decker.  Kinetic Study and New Applications of UV Radiation Curing , 2002 .

[54]  D. Davis.  Nomographs for Thermal Conductivities of Gases and Vapors , 1941 .

[55]  P. Dickens,et al.  3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications , 2017 .

[56]  J. Halloran,et al.  Radical depletion model for intensity effects on photopolymerization , 2013 .

[57]  S. Nutt,et al.  Moisture absorption of unidirectional hybrid composites , 2012 .