A comprehensive review on combustion stabilization technologies of micro/meso-scale combustors for micro thermophotovoltaic systems: Thermal, emission, and energy conversion

[1]  J. E,et al.  Parametric study of cavity on the performance of a hydrogen-fueled micro planar combustor for thermophotovoltaic applications , 2023, Energy.

[2]  J. E,et al.  Numerical investigations on the performance of a hydrogen-fueled micro planar combustor with tube outlet for thermophotovoltaic applications , 2022, Energy.

[3]  Y. Gan,et al.  A review on the technology development and fundamental research of electrospray combustion of liquid fuel at small-scale , 2022, Fuel Processing Technology.

[4]  Yuze Sun,et al.  Dilution Effect on Thermal Performances and NO Emission Characteristics of an Ammonia-oxygen Micro-thermophotovoltaic System , 2022, Thermal Science and Engineering Progress.

[5]  Zheng Zhang,et al.  Effect of Helical Fins on the Combustion Performance in a Micro-Step Combustor , 2022, SSRN Electronic Journal.

[6]  J. E,et al.  A review of enhancing micro combustion to improve energy conversion performance in micro power system , 2022, International Journal of Hydrogen Energy.

[7]  Yunfei Yan,et al.  Numerical study on combustion characteristics and heat transfer enhancement of the micro combustor embedded with Y-shaped fin for Micro Thermo-Photovoltaic system , 2022, Applied Thermal Engineering.

[8]  Jianfeng Pan,et al.  Numerical Simulation and Emission Analysis of Ammonia/Oxygen Premixed Combustion Process in Micro-combustor with Baffle , 2022, Chemical Engineering and Processing - Process Intensification.

[9]  Jianfeng Pan,et al.  Effects of mixing ozone on combustion characteristics of premixed methane/oxygen in meso-scale channels , 2022, Fuel.

[10]  Lei Cai,et al.  Effects analysis on the catalytic combustion and heat transfer performance enhancement of a non-premixed hydrogen/air micro combustor , 2022, Fuel.

[11]  Siliang Ni,et al.  NOx Emission Reduction in Ammonia-powered Micro-combustors by Partially Inserting Porous Medium under Fuel-rich Condition , 2022, Chemical Engineering Journal.

[12]  Feng Zhang,et al.  Investigation on combustion characteristics and thermal performance of a three rearward-step structure micro combustor fueled by premixed hydrogen/air , 2022, Renewable Energy.

[13]  Y. Tu,et al.  Experimental and numerical investigation on premixed H2/C3H8/air combustion and thermal performance in a burner with partially filled porous media , 2022, Fuel.

[14]  Zhien Zhang,et al.  Parametric study of inserting internal spiral fins on the micro combustor performance for thermophotovoltaic systems , 2022, Renewable and Sustainable Energy Reviews.

[15]  Wenming Yang,et al.  Study on combustion characteristic of premixed H2/C3H8/air and working performance in the micro combustor with block , 2022, Fuel.

[16]  Yunfei Yan,et al.  Comprehensive numerical insight the thermal performance improvement of the micro combustors with internal bionic Y-shaped fins for micro-thermal voltaic system applications , 2022, Fuel.

[17]  Jianfeng Pan,et al.  Effect of intake method on ammonia/oxygen non-premixed combustion in the micro combustor with dual-inlet , 2022, Fuel.

[18]  Huai-Chun Zhou,et al.  Investigation of thermal performance and energy conversion in a novel planar micro-combustor with four-corner entrances for thermo-photovoltaic power generators , 2021, Journal of Power Sources.

[19]  Ming-hou Liu,et al.  Influencing factors of wall temperature and flame stability of micro-combustors in micro-thermophotovoltaic and micro-thermoelectric systems , 2021, Fuel.

[20]  Feng Zhang,et al.  A comprehensive review on performance improvement of micro energy mechanical system: Heat transfer, micro combustion and energy conversion , 2021, Energy.

[21]  Dan Zhao,et al.  Heat transfer and entropy production evaluation on premixed hydrogen/air-fuelled micro-combustors with internal threads , 2021 .

[22]  Wenming Yang,et al.  Entropy generation analysis of premixed hydrogen–air combustion in a micro combustor with porous medium , 2021 .

[23]  Feng Zhang,et al.  Process in micro-combustion and energy conversion of micro power system: A review , 2021 .

[24]  Dan Zhao,et al.  NOx emission and energy conversion efficiency studies on ammonia-powered micro-combustor with ring-shaped ribs in fuel-rich combustion , 2021, Journal of Cleaner Production.

[25]  Yuqiang Li,et al.  Thermal performance characteristics of a micro-combustor with swirl rib fueled with premixed hydrogen/air , 2021, International Journal of Hydrogen Energy.

[26]  Yunfei Yan,et al.  Numerical study on premixed hydrogen/air combustion characteristics and heat transfer enhancement of micro-combustor embedded with pin fins , 2021, International Journal of Hydrogen Energy.

[27]  Yunfei Yan,et al.  Numerical investigation on combustion characteristics of premixed hydrogen/air in a swirl micro combustor with twisted vanes , 2021, International Journal of Hydrogen Energy.

[28]  Dan Zhao,et al.  Energy and exergy conversion enhancement of a premixed hydrogen-fuelled wavy-combustor for micro-thermophotovolatic application , 2021 .

[29]  Dan Zhao,et al.  Optimizing thermal performance and exergy efficiency in hydrogen-fueled meso-combustors by applying a bluff-body , 2021 .

[30]  Yuze Sun,et al.  Evaluation of NO emissions characteristics in a CO2-Free micro-power system by implementing a perforated plate , 2021, Renewable and Sustainable Energy Reviews.

[31]  Yuze Sun,et al.  Enhancing heat transfer performance analyses of a hydrogen-fueled meso-combustor with staggered bluff-bodies , 2021, Fuel Processing Technology.

[32]  Zhongqing Yang,et al.  Influence of hole size and number on pressure drop and energy output of the micro-cylindrical combustor inserting with an internal spiral fin with holes , 2021, International Journal of Hydrogen Energy.

[33]  Qiang Ni,et al.  Role of hydrogen addition in propane/air flame characteristic and stability in a micro-planar combustor , 2021 .

[34]  Dan Zhao,et al.  Effects of porous media on partially premixed combustion and heat transfer in meso-scale burners fuelled with ethanol , 2021 .

[35]  Qingqing Li,et al.  Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications , 2021 .

[36]  Zhien Zhang,et al.  Heat transfer enhancement and exergy efficiency improvement of a micro combustor with internal spiral fins for thermophotovoltaic systems , 2021, Applied Thermal Engineering.

[37]  Jun Yu Li,et al.  Comparative investigation of combustion and thermal characteristics of a conventional micro combustor and micro combustor with internal straight/spiral fins for thermophotovoltaic system , 2021 .

[38]  Dan Zhao,et al.  Energy conversion efficiency improvement studies on unconventional premixed micro-combustors partially inserted with porous medium , 2021, Fuel Processing Technology.

[39]  Wenming Yang,et al.  Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic , 2021 .

[40]  J. Gong,et al.  Parametric study of methane catalytic combustion in a micro-channel reactor: Effects of porous washcoat properties , 2021 .

[41]  Dan Zhao,et al.  Effect analysis on energy conversion enhancement and NOx emission reduction of ammonia/hydrogen fuelled wavy micro-combustor for micro-thermophotovoltaic application , 2021 .

[42]  M. Sellier,et al.  Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications , 2021, Energy.

[43]  Z. Mansouri.  A novel wavy micro-combustor for micro-thermophotovoltaic applications , 2021 .

[44]  Wenming Yang,et al.  Effects of propane addition and burner scale on the combustion characteristics and working performance , 2021 .

[45]  A. Fan,et al.  Recent progress in flame stabilization technologies for combustion-based micro energy and power systems , 2021 .

[46]  Zhien Zhang,et al.  Numerical investigation of a novel micro combustor with a central and bilateral slotted blunt body , 2021 .

[47]  Dan Zhao,et al.  Mitigating NOx emissions from an ammonia-fueled micro-power system with a perforated plate implemented. , 2021, Journal of hazardous materials.

[48]  A. Fan,et al.  Non-premixed combustion characteristics and thermal performance of a catalytic combustor for micro-thermophotovoltaic systems , 2021 .

[49]  Yuze Sun,et al.  NO emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system , 2020, Chemical Engineering Journal.

[50]  Razieh Abbasgholi Rezaei,et al.  Enhance the energy and exergy performance of hydrogen combustion by improving the micro-combustor outlet in thermofluidic systems , 2020 .

[51]  Dan Zhao,et al.  Effects of fuel composition and wall thermal conductivity on thermal and NOx emission performances of an ammonia/hydrogen-oxygen micro-power system , 2020 .

[52]  Yuqiang Li,et al.  Thermal performance improvement of premixed hydrogen/air fueled cylindrical micro-combustor using a preheater-conductor plate , 2020 .

[53]  Wenming Yang,et al.  Investigation on H2/air combustion with C3H8 addition in the combustor with part/full porous medium , 2020 .

[54]  Zhongqing Yang,et al.  Numerical investigation on a multi-channel micro combustor fueled with hydrogen for a micro-thermophotovoltaic system , 2020 .

[55]  B. Wang,et al.  NO emission and thermal performances studies on premixed ammonia-oxygen combustion in a CO2-free micro-planar combustor , 2020 .

[56]  Jinxiang Liu,et al.  Experimental study of propane/air premixed flame dynamics with hydrogen addition in a meso-scale quartz tube , 2020 .

[57]  Dan Zhao,et al.  Thermodynamics and entropy generation studies of a T-shaped micro-combustor: Effects of porous medium and ring-shaped ribs , 2020 .

[58]  J. E,et al.  Bluff-body effect on thermal and NO emission characteristics in a micro-planar combustor fueled with premixed ammonia-oxygen , 2020 .

[59]  Haibo Zhao,et al.  Excess enthalpy combustion of methane-air in a novel micro non-premixed combustor with a flame holder and preheating channels , 2020 .

[60]  Ming-hou Liu,et al.  Effects of bluff-body on the thermal performance of micro thermophotovoltaic system based on porous media combustion , 2020, Applied Thermal Engineering.

[61]  K. Kim,et al.  Effect of hydrogen addition on conjugate heat transfer in a planar micro-combustor with the detailed reaction mechanism: An analytical approach , 2020 .

[62]  Lei Zhao,et al.  Parametric analysis on the combustion and thermal performance of a swirl micro-combustor for micro thermophotovoltaic system , 2020 .

[63]  R. Yuen,et al.  Enhancement of combustion performance in a microchannel: Synergistic effects of bluff-body and cavity , 2020 .

[64]  Qingqing Li,et al.  Effects of rectangular rib on exergy efficiency of a hydrogen-fueled micro combustor , 2020 .

[65]  Wenming Yang,et al.  Investigation on premixed H2/C3H8/air combustion in porous medium combustor for the micro thermophotovoltaic application , 2020 .

[66]  Ming-hou Liu,et al.  Combustion characteristics and radiation performance of premixed hydrogen/air combustion in a mesoscale divergent porous media combustor , 2020 .

[67]  É. Fontana,et al.  Numerical analysis of heat recuperation in micro-combustors using internal recirculation , 2020 .

[68]  Aikun Tang,et al.  Effect of dimethyl ether addition on flame stability of premixed methane/air in a micro-planar quartz combustor , 2020 .

[69]  Jianfeng Pan,et al.  Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor , 2020 .

[70]  Zhien Zhang,et al.  Numerical comparison of H2/air catalytic combustion characteristic of micro–combustors with a conventional, slotted or controllable slotted bluff body , 2019 .

[71]  Wenming Yang,et al.  Experimental investigation on premixed hydrogen/air combustion in varied size combustors inserted with porous medium for thermophotovoltaic system applications , 2019, Energy Conversion and Management.

[72]  Samad Jafarmadar,et al.  The numerical study of the energy and exergy efficiencies of the micro-combustor by the internal micro-fin for thermophotovoltaic systems , 2019, Journal of Cleaner Production.

[73]  Z. Mansouri.  Combustion in wavy micro-channels for thermo-photovoltaic applications – Part I: Effects of wavy wall geometry, wall temperature profile and reaction mechanism , 2019, Energy Conversion and Management.

[74]  E. Karimi-Sibaki,et al.  The role of heat recirculation and flame stabilization in the formation of NOX in a thermo-photovoltaic micro-combustor step wall , 2019, International Journal of Hydrogen Energy.

[75]  Harun Yilmaz.  Investigation of combustion and emission performance of a micro combustor: Effects of bluff body insertion and oxygen enriched combustion conditions , 2019, International Journal of Hydrogen Energy.

[76]  Sudarshan Kumar,et al.  Flame dynamics in a stepped micro-combustor for non-adiabatic wall conditions , 2019, Thermal Science and Engineering Progress.

[77]  Lei Zhao,et al.  Comparative study of combustion and thermal performance in a swirling micro combustor under premixed and non-premixed modes , 2019, Applied Thermal Engineering.

[78]  Bahamin Bazooyar,et al.  Analysis of flame stabilization to a thermo-photovoltaic micro-combustor step in turbulent premixed hydrogen flame , 2019 .

[79]  J. Ran,et al.  Influence of controllable slit width and angle of controllable flow on hydrogen/air premixed combustion characteristics in micro combustor with both sides–slitted bluff body , 2019, International Journal of Hydrogen Energy.

[80]  Wenming Yang,et al.  Combustion characteristics and thermal performance of premixed hydrogen-air in a two-rearward-step micro tube , 2019, Applied Energy.

[81]  A. Fan,et al.  Experimental investigation on non-premixed CH4/air combustion in a novel miniature Swiss-roll combustor , 2019, Chemical Engineering and Processing - Process Intensification.

[82]  J. Ellzey,et al.  Heat recirculating reactors: Fundamental research and applications , 2019, Progress in Energy and Combustion Science.

[83]  F. Zhang,et al.  Experimental and numerical investigation of a micro-thermophotovoltaic system with different backward-facing steps and wall thicknesses , 2019, Energy.

[84]  Dan Zhao,et al.  Numerical and entropy studies of hydrogen-fuelled micro-combustors with different geometric shaped ribs , 2019, International Journal of Hydrogen Energy.

[85]  Xiao Yang,et al.  Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor , 2019, Energy.

[86]  A. Fan,et al.  Comparison of combustion efficiency between micro combustors with single- and double-layered walls: A numerical study , 2019, Chemical Engineering and Processing - Process Intensification.

[87]  T. Park,et al.  Flame characteristics depending on recirculating flows in a non-premixed micro combustor with varying baffles , 2019, Applied Thermal Engineering.

[88]  Weiqi Wang,et al.  Numerical study of the premixed propane/air flame characteristics in a partially filled micro porous combustor , 2019, Energy.

[89]  Xiao Yang,et al.  Enhancement of thermal performance by converging-diverging channel in a micro tube combustor fueled by premixed hydrogen/air , 2019, International Journal of Hydrogen Energy.

[90]  J. Ran,et al.  Numerical study on premixed hydrogen/air combustion characteristics in micro–combustor with slits on both sides of the bluff body , 2019, International Journal of Hydrogen Energy.

[91]  A. Fan,et al.  Effect of a catalytic segment on flame stability in a micro combustor with controlled wall temperature profile , 2018, Energy.

[92]  A. Fan,et al.  Suppression of flame instability by a short catalytic segment on the wall of a micro channel with a prescribed wall temperature profile , 2018, Fuel.

[93]  Jianfeng Pan,et al.  Numerical study on energy conversion performance of micro-thermophotovoltaic system adopting a heat recirculation micro-combustor , 2018, Fuel Processing Technology.

[94]  H. Faramarzpour,et al.  Effect of backward facing step on radiation efficiency in a micro combustor , 2018, International Journal of Thermal Sciences.

[95]  Qingguo Peng,et al.  Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air , 2018, Energy.

[96]  Junjie Chen,et al.  Computational fluid dynamics modeling of the combustion and emissions characteristics in high-temperature catalytic micro-combustors , 2018, Applied Thermal Engineering.

[97]  A. Fan,et al.  Enhancement of hydrogen combustion efficiency by helium dilution in a micro-combustor with wall cavities , 2018, Chemical Engineering and Processing - Process Intensification.

[98]  Wei Wang,et al.  The effects of hydrogen addition, inlet temperature and wall thermal conductivity on the flame-wall thermal coupling of premixed propane/air mixtures in meso-scale tubes , 2018 .

[99]  Jianfeng Pan,et al.  Experimental and numerical study of premixed propane/air combustion in the micro-planar combustor with a cross-plate insert , 2018 .

[100]  A. Fan,et al.  Effect of oxygen enrichment on combustion efficiency of lean H2/N2/O2 flames in a micro cavity-combustor , 2018 .

[101]  E. Amani,et al.  Micro-combustor performance enhancement by hydrogen addition in a combined baffle-bluff configuration , 2018 .

[102]  Zhien Zhang,et al.  Numerical investigation on combustion characteristics of methane/air in a micro-combustor with a regular triangular pyramid bluff body , 2018 .

[103]  Y. Gan,et al.  Electro-spraying and catalytic combustion characteristics of ethanol in meso-scale combustors with steel and platinum meshes , 2018 .

[104]  Yueh‐Heng Li,et al.  Performance assessment of catalytic combustion-driven thermophotovoltaic platinum tubular reactor , 2018 .

[105]  Xiaohuan Zhao,et al.  Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor , 2018 .

[106]  Jianfeng Pan,et al.  Micro combustion in a porous media for thermophotovoltaic power generation , 2018 .

[107]  T. Park,et al.  Non-premixed lean flame characteristics depending on air hole positions in a baffled micro combustor , 2018 .

[108]  E. Amani,et al.  Micro-combustor performance enhancement using a novel combined baffle-bluff configuration , 2018 .

[109]  Xiaohuan Zhao,et al.  Investigation on the effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor , 2018 .

[110]  L. Meng,et al.  Flame stabilization in a planar microcombustor partially filled with anisotropic porous medium , 2018 .

[111]  Yueh‐Heng Li,et al.  Power generation performance of hydrogen-fueled micro thermophotovoltaic reactor , 2018 .

[112]  Jianfeng Pan,et al.  Experimental investigation on combustion characteristics of premixed propane/air in a micro-planar heat recirculation combustor , 2017 .

[113]  Dandan Han,et al.  Numerical investigations on thermal performance of double-layer four-channel micro combustors for micro-thermophotovoltaic system , 2017 .

[114]  Selim Tangöz,et al.  A numerical study on combustion and emission characteristics of premixed hydrogen air flames , 2017 .

[115]  Jianfeng Pan,et al.  Combustion characteristics of premixed propane/hydrogen/air in the micro-planar combustor with different channel-heights , 2017 .

[116]  Harun Yilmaz,et al.  Effect of micro combustor geometry on combustion and emission behavior of premixed hydrogen/air flames , 2017 .

[117]  Wenming Yang,et al.  Hetero-/homogeneous combustion characteristics of premixed hydrogen-air mixture in a planar micro-reactor with catalyst segmentation , 2017 .

[118]  A. Alipoor,et al.  Numerical study of hydrogen-air combustion characteristics in a novel micro-thermophotovoltaic power generator , 2017 .

[119]  Junjie Chen,et al.  Management of the gas-phase and surface chemistry in methane-fueled catalytic micro-combustors , 2017 .

[120]  Zhaoli Guo,et al.  CFD study on stability limits of hydrogen/air premixed flames in planar micro-combustors with catalytic walls , 2017 .

[121]  Jianfeng Pan,et al.  Experimental study on premixed methane-air catalytic combustion in rectangular micro channel , 2017 .

[122]  Dandan Han,et al.  Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor , 2017 .

[123]  Mohammed N. Khan,et al.  Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications , 2017 .

[124]  A. Fan,et al.  Experimental investigation on non-premixed methane/air combustion in Y-shaped meso-scale combustors with/without fibrous porous media , 2017 .

[125]  Junjie Chen,et al.  Flame stability and heat transfer analysis of methane-air mixtures in catalytic micro-combustors , 2017 .

[126]  Wenming Yang,et al.  Interaction between heterogeneous and homogeneous reaction of premixed hydrogen–air mixture in a planar catalytic micro-combustor , 2017 .

[127]  E Jiaqiang,et al.  Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor , 2017 .

[128]  E Jiaqiang,et al.  Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer , 2016 .

[129]  Dan Zhao,et al.  Effects of heat recirculation on combustion characteristics of n-heptane in micro combustors , 2016 .

[130]  A. Fan,et al.  Experimental investigation and numerical analysis on the blow-off limits of premixed CH4/air flames in a mesoscale bluff-body combustor , 2016 .

[131]  Xiaohuan Zhao,et al.  Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor , 2016 .

[132]  A. Fan,et al.  Effect of reduced pressures on the combustion efficiency of lean H2/air flames in a micro cavity-combustor , 2016 .

[133]  A. Fan,et al.  Experimental and numerical investigations on flame stability of methane/air mixtures in mesoscale combustors filled with fibrous porous media , 2016 .

[134]  Zhaoli Guo,et al.  Numerical study on heat recirculation in a porous micro-combustor , 2016 .

[135]  A. Fan,et al.  Effect of inlet temperature on combustion efficiency of lean H2/air mixtures in a micro-combustor with wall cavities , 2016 .

[136]  K. Mazaheri,et al.  Combustion characteristics and flame bifurcation in repetitive extinction-ignition dynamics for premixed hydrogen-air combustion in a heated micro channel , 2016 .

[137]  E Jiaqiang,et al.  Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step , 2016 .

[138]  Song Hu,et al.  Hetero-/homogeneous combustion of premixed hydrogen–oxygen mixture in a micro-reactor with catalyst segmentation , 2016 .

[139]  Wenming Yang,et al.  Effects of products from heterogeneous reactions on homogeneous combustion for H2/O2 mixture in the micro combustor , 2016 .

[140]  A. Fan,et al.  A numerical investigation on the effect of wall thermal conductivity on flame stability and combustion efficiency in a mesoscale channel filled with fibrous porous medium , 2016 .

[141]  Wei Chen,et al.  Combustion and direct energy conversion inside a micro-combustor , 2016 .

[142]  Jun Li,et al.  Experimental study on standing wave regimes of premixed H2–air combustion in planar micro-combustors partially filled with porous medium , 2016 .

[143]  J. Ran,et al.  Effects of trapezoidal bluff bodies on blow out limit of methane/air combustion in a micro-channel , 2016 .

[144]  Mohamed Sultan Mohamed Ali,et al.  Micro-scale energy harvesting devices: Review of methodological performances in the last decade , 2016 .

[145]  E Jiaqiang,et al.  Field synergy analysis of the micro-cylindrical combustor with a step , 2016 .

[146]  Zhaoli Guo,et al.  Fundamental flame characteristics of premixed H2–air combustion in a planar porous micro-combustor , 2016 .

[147]  H. Xue,et al.  Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor , 2015 .

[148]  A. Fan,et al.  Numerical investigation of filtration gas combustion in a mesoscale combustor filled with inert fibrous porous medium , 2015 .

[149]  Zixue Luo,et al.  Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system , 2015 .

[150]  S. E. Hosseini,et al.  Impacts of inner/outer reactor heat recirculation on the characteristic of micro-scale combustion system , 2015 .

[151]  A. Fan,et al.  Effect of pressure on the blow-off limits of premixed CH4/air flames in a mesoscale cavity-combustor , 2015 .

[152]  A. Fan,et al.  A non-monotonic variation of blow-off limit of premixed CH4/air flames in mesoscale cavity-combustors with different thermal conductivities , 2015 .

[153]  A. Fan,et al.  Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame , 2015 .

[154]  A. Fan,et al.  Effect of channel gap distance on the flame blow-off limit in mesoscale channels with cavities for premixed CH4/air flames , 2015 .

[155]  T. Shamim,et al.  A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application , 2015 .

[156]  Zhaoli Guo,et al.  Effects of combustor size and filling condition on stability limits of premixed H2‐air flames in planar microcombustors , 2015 .

[157]  Wenming Yang,et al.  Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor , 2015 .

[158]  Wenming Yang,et al.  Effects of H2/CO blend ratio on radiated power of micro combustor/emitter , 2015 .

[159]  A. Fan,et al.  Effect of thermal conductivity of solid wall on combustion efficiency of a micro-combustor with cavities , 2015 .

[160]  Li Zhang,et al.  Numerical investigation on the combustion characteristics of methane/air in a micro-combustor with a hollow hemispherical bluff body , 2015 .

[161]  A. Fan,et al.  Experimental investigation and numerical analysis on flame stabilization of CH4/air mixture in a mesoscale channel with wall cavities , 2015 .

[162]  Jun Li,et al.  Dynamic behaviors of premixed hydrogen–air flames in a planar micro-combustor filled with porous medium , 2015 .

[163]  Wenming Yang,et al.  Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates , 2015 .

[164]  Li Zhang,et al.  Thermal and chemical effects of hydrogen addition on catalytic micro-combustion of methane–air , 2014 .

[165]  K. Mazaheri,et al.  Studying the repetitive extinction-ignition dynamics for lean premixed hydrogen-air combustion in a heated microchannel , 2014 .

[166]  S. E. Hosseini,et al.  Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen-air mixture , 2014 .

[167]  Yi Liu,et al.  A numerical investigation on combustion characteristics of H2/air mixture in a micro-combustor with wall cavities , 2014 .

[168]  Wenming Yang,et al.  Development of micro-thermophotovoltaic power generator with heat recuperation , 2014 .

[169]  Zhongqing Yang,et al.  Numerical simulation of the effect of hydrogen addition fraction on catalytic micro-combustion characteristics of methane-air , 2014 .

[170]  A. Fan,et al.  Effect of bluff body shape on the blow-off limit of hydrogen/air flame in a planar micro-combustor , 2014 .

[171]  Wenming Yang,et al.  Thermal performance of micro-combustors with baffles for thermophotovoltaic system , 2013 .

[172]  W. Liu,et al.  Interactions between heat transfer, flow field and flame stabilization in a micro-combustor with a bluff body , 2013 .

[173]  Yueh-Heng Li,et al.  Combustion characteristics of a small-scale combustor with a percolated platinum emitter tube for thermophotovoltaics , 2013 .

[174]  Zhongqing Yang,et al.  Numerical study on combustion characteristics of hydrogen addition into methane–air mixture , 2013 .

[175]  Bhupendra Khandelwal,et al.  Experimental studies on flame stabilization in a three step rearward facing configuration based micro channel combustor , 2013 .

[176]  A. Fan,et al.  The effect of the blockage ratio on the blow-off limit of a hydrogen/air flame in a planar micro-combustor with a bluff body , 2013 .

[177]  Oh Chae Kwon,et al.  Performance of a micro-thermophotovoltaic power system using an ammonia-hydrogen blend-fueled micro-emitter , 2013 .

[178]  Sudarshan Kumar,et al.  On the formation of spinning flames and combustion completeness for premixed fuel–air mixtures in stepped tube microcombustors , 2013 .

[179]  A. Fan,et al.  Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body , 2012 .

[180]  Mohammadreza Baigmohammadi,et al.  Numerical study of the effects of heat transfer methods on CH4/(CH4 + H2)-AIR pre-mixed flames in a micro-stepped tube , 2012 .

[181]  Niket S. Kaisare,et al.  A review on microcombustion: Fundamentals, devices and applications , 2012 .

[182]  Ashwani K. Gupta,et al.  A review of progress in heat recirculating meso-scale combustors , 2011 .

[183]  K. Maruta,et al.  Microscale combustion: Technology development and fundamental research , 2011 .

[184]  David C. Walther,et al.  Advances and challenges in the development of power-generation systems at small scales , 2011 .

[185]  Kan Xu,et al.  Stability of lean combustion in mini-scale porous media combustor with heat recuperation , 2011 .

[186]  V. Vijayan,et al.  Thermal performance of a meso-scale liquid-fuel combustor , 2011 .

[187]  Wenming Yang,et al.  Research on modular micro combustor-radiator with and without porous media , 2011 .

[188]  K. Maruta.  Micro and mesoscale combustion , 2011 .

[189]  Yueh-Heng Li,et al.  Development of a tubular flame combustor for thermophotovoltaic power systems , 2011 .

[190]  Wenming Yang,et al.  Development of micro power generators – A review , 2011 .

[191]  N. Kasagi,et al.  Quenching mechanism study of oscillating flame in micro channels using phase-locked OH-PLIF , 2011 .

[192]  Bhupendra Khandelwal,et al.  Experimental investigations on flame stabilization behavior in a diverging micro channel with premixed methane–air mixtures , 2010 .

[193]  A. Gupta,et al.  Flame dynamics of a meso-scale heat recirculating combustor , 2010 .

[194]  B. Zhong,et al.  Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors , 2010 .

[195]  N. Kaisare,et al.  Simulation of hydrogen and hydrogen-assisted propane ignition in Pt catalyzed microchannel , 2010 .

[196]  Min Jung Lee,et al.  Experiment on the effect of Pt-catalyst on the characteristics of a small heat-regenerative CH4–air premixed combustor , 2010 .

[197]  Min Jung Lee,et al.  Scale and material effects on flame characteristics in small heat recirculation combustors of a counter-current channel type , 2010 .

[198]  C. Frouzakis,et al.  Flame dynamics in catalytic and non-catalytic mesoscale microreactors , 2010 .

[199]  V. D. Sarli,et al.  Effect of geometry on the thermal behavior of catalytic micro-combustors , 2010 .

[200]  Wenming Yang,et al.  Porous media combustion for micro thermophotovoltaic system applications , 2010 .

[201]  Wei Liu,et al.  Experimental investigation on flame pattern formations of DME-air mixtures in a radial microchannel , 2010 .

[202]  K. Maruta,et al.  Characteristic regimes of premixed gas combustion in high-porosity micro-fibrous porous media , 2010 .

[203]  Yang Wang,et al.  Combustion of hydrogen-air in micro combustors with catalytic Pt layer , 2010 .

[204]  Wenming Yang,et al.  Experimental investigation of porous media combustion in a planar micro-combustor , 2010 .

[205]  Gennaro Russo,et al.  A novel catalytic-homogenous micro-combustor , 2009 .

[206]  Wenming Yang,et al.  Characterization of wall temperature and radiation power through cylindrical dump micro-combustors , 2009 .

[207]  Wenming Yang,et al.  A potential heat source for the micro-thermophotovoltaic (TPV) system , 2009 .

[208]  Yang Wang,et al.  Combustion of hydrogen–air in catalytic micro-combustors made of different material , 2009 .

[209]  Wenming Yang,et al.  Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux , 2009 .

[210]  K. Maruta,et al.  Filtration Combustion of Methane in High-Porosity Micro-Fibrous Media , 2009 .

[211]  Takashi Kamijo,et al.  High-temperature micro catalytic combustor with Pd/nano-porous alumina , 2009 .

[212]  N. Kasagi,et al.  Experimental study of micro-scale premixed flame in quartz channels , 2009 .

[213]  Wei Liu,et al.  Regime diagrams and characteristics of flame patterns in radial microchannels with temperature gradients , 2008 .

[214]  Yei-Chin Chao,et al.  Enhancement of hydrogen reaction in a micro-channel by catalyst segmentation , 2008 .

[215]  D. Vlachos,et al.  A computational fluid dynamics study of propane/air microflame stability in a heat recirculation reactor , 2008 .

[216]  Yei-Chin Chao,et al.  Effects of catalytic walls on hydrogen/air combustion inside a micro-tube , 2007 .

[217]  Kefa Cen,et al.  Effects of hydrogen addition on methane catalytic combustion in a microtube , 2007 .

[218]  Bo Feng,et al.  The development of a micropower (micro-thermophotovoltaic) device , 2007 .

[219]  Soichiro Kato,et al.  Development and scale effects of small Swiss-roll combustors , 2007 .

[220]  Paul D. Ronney,et al.  Numerical modeling of non-adiabatic heat-recirculating combustors , 2007 .

[221]  Kaoru Maruta,et al.  On the formation of multiple rotating Pelton-like flame structures in radial microchannels with lean methane–air mixtures ☆ , 2007 .

[222]  Y. Ju,et al.  Experimental study of spinning combustion in a mesoscale divergent channel , 2007 .

[223]  Shigenao Maruyama,et al.  Flame stabilization and emission of small Swiss-roll combustors as heaters , 2005 .

[224]  Takuya Kataoka,et al.  Characteristics of combustion in a narrow channel with a temperature gradient , 2005 .

[225]  Dionisios G. Vlachos,et al.  Hydrogen assisted self-ignition of propane/air mixtures in catalytic microburners , 2005 .

[226]  C. Shu,et al.  Research on micro-thermophotovoltaic power generators , 2003 .

[227]  Wenming Yang,et al.  Microscale combustion research for application to micro thermophotovoltaic systems , 2003 .

[228]  Wenming Yang,et al.  Combustion in micro-cylindrical combustors with and without a backward facing step , 2002 .

[229]  K. Mazaheri,et al.  Effect of oxidizer dilution on thermophotovoltaic performance of premixed ammonia/hydrogen/air combustion in radial micro-combustor , 2022, Fuel.