Characterization of sandwich composite T-joints under different ageing conditions

Abstract High-tech demands of the aviation industry require a detailed knowledge of the mechanical and structural response of composite structures. This contribution presents experimental investigations on composite honeycomb sandwich T-joint connections. To understand the effect of loading and ageing on the adhesively bonded joints, quasistatic tension experiments have been performed with the original T-joints and with two sets of artificially aged specimen. The accelerated ageing was enforced by thermal cycling with temperatures in the range of - 35 ° C to 70 ° C . The failure behavior of the original and the aged specimens are compared to provide primary data for analyzing the behavior of honeycomb sandwich T-joints in limit conditions. A fractographic analysis is performed to determine the failure modes. Additionally the provided data are verified with three-dimensional finite element analyses using a cohesive element technique. The achieved results provide not only new data for designers but can also be used for future computational models of sandwich structures.

[1]  J. Chousal,et al.  Effect of Adhesive Type and Thickness on the Lap Shear Strength , 2006 .

[2]  K. Tserpes,et al.  Fracture toughness and shear behavior of composite bonded joints based on a novel aerospace adhesive , 2012 .

[3]  Anthony G. Evans,et al.  MECHANICS OF MATERIALS: TOP-DOWN APPROACHES TO FRACTURE , 2000 .

[4]  A. D. Crocombe,et al.  Global yielding as a failure criterion for bonded joints , 1989 .

[5]  Jin-Hwe Kweon,et al.  Characterization of Nomex honeycomb core constituent material mechanical properties , 2014 .

[6]  R. A. Shenoi,et al.  Determination of hygrothermal ageing effects in sandwich construction joints using thermoelastic stress analysis , 2003 .

[7]  Robert D. Adams,et al.  Stress analysis of adhesive-bonded lap joints , 1974 .

[8]  B. Benmokrane,et al.  Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature , 2016 .

[9]  J. H. Rose,et al.  UNIVERSAL BINDING ENERGY RELATIONS IN METALLIC ADHESION. , 1981 .

[10]  M. D. Thouless,et al.  The effects of geometry and material properties on the fracture of single lap-shear joints , 2002 .

[11]  G. Fadel,et al.  Design of Honeycombs for Modulus and Yield Strain in Shear , 2012 .

[12]  M. D. Thouless,et al.  Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation , 1999 .

[13]  Mohammad Reza Khosravani,et al.  Experimental investigations of the environmental effects on stability and integrity of composite sandwich T‐joints , 2017 .

[14]  D. Krajcinovic,et al.  Introduction to continuum damage mechanics , 1986 .

[15]  R. Haghani,et al.  Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy , 2017 .

[16]  Sebastian Heimbs,et al.  Failure behaviour of honeycomb sandwich corner joints and inserts , 2009 .

[17]  L. J. Hart-Smith.  The key to designing durable adhesively bonded joints , 1994 .

[18]  Hongxu Wang,et al.  Experimental study of the medium velocity impact response of sandwich panels with different cores , 2016 .

[19]  M. Phillips,et al.  Compatibility of commercial chopped-strand mats with a phenolic resin system for hand laminating , 1989 .

[20]  Mark S. M. Alger,et al.  Polymer Science Dictionary , 1989 .

[21]  Anthony J. Kinloch,et al.  Mode I fracture in adhesively-bonded joints: A mesh-size independent modelling approach using cohesive elements , 2014 .

[22]  Y. Li,et al.  Microstructure evolution and mechanical properties of a nickel-based honeycomb sandwich aged at 900 °C , 2011 .

[23]  Wenbin Hu,et al.  A study on composite honeycomb sandwich panel structure , 2008 .

[24]  Qingguo Fei,et al.  Drop-weight impact behavior of honeycomb sandwich panels under a spherical impactor , 2017 .

[25]  Xiaocong He.  A review of finite element analysis of adhesively bonded joints , 2011 .

[26]  Kerstin Weinberg,et al.  A numerical approach to the analysis of failure modes in anisotropic plates , 2011 .

[27]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[28]  Thiru Aravinthan,et al.  Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios , 2017 .

[29]  C. Yang,et al.  The effect of node bond adhesive fillet on uniaxial in-plane responses of hexagonal honeycomb core , 2017 .

[30]  Jan K. Spelt,et al.  Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints – Part I: Experiments , 2011 .

[31]  Mariana D. Banea,et al.  Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer , 2013 .

[32]  J. Williams,et al.  Fracture toughness characterization of phenolic resin and its composite , 1995 .

[33]  W. S. Teo,et al.  Modelling the fracture behaviour of adhesively-bonded joints as a function of test rate , 2011 .

[35]  C. Bakis,et al.  Experimental characterization of phenolic-impregnated honeycomb sandwich structures for transportation vehicles , 2011 .

[36]  Ian A. Ashcroft,et al.  Mode I fracture of epoxy bonded composite joints 2. Fatigue loading , 2002 .

[37]  Wang Shao-quan,et al.  Thermal ageing effects on mechanical properties and barely visible impact damage behavior of a carbon fiber reinforced bismaleimide composite , 2017 .

[38]  Anastasios P. Vassilopoulos,et al.  Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints , 2009 .

[39]  Yu Li,et al.  Enhanced thermal resistance of phenolic resin composites at low loading of graphene oxide , 2013 .

[40]  Stéphane Bordas,et al.  Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory , 2014 .

[41]  Chad M. Landis,et al.  On the determination of the cohesive zone properties of an adhesive layer from the analysis of the wedge-peel test , 2003 .

[42]  Chad M. Landis,et al.  Constraint effects in adhesive joint fracture , 2005 .

[43]  A. Beukers,et al.  Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures , 2001 .