A mathematical human body model for frontal and rearward seated automotive impact loading

Mathematical modelling is widely used for crash-safety research and design. However, most occupant models used in crash simulations are based on crash dummies and thereby inherit their apparent limitations. Several models simulating parts of the real human body have been published, but only few describe the entire human body and these models were developed and validated only for a limited range of conditions. This paper describes a human body model for both frontal and rearward loading. A combination of modelling techniques is applied using rigid bodies for most body segments, but describing the thorax as a flexible structure. The skin is described in detail using an arbitrary surface. Static and dynamic properties of the articulations have been derived from literature. The RAMSIS anthropometric database has been used to define a model representing a 50th percentile male. The model has been validated using volunteer tests performed at NBDL ranging from 3-15 G severity, and using established dummy biofidelity requirements for blunt thoracic impact. A satisfactory prediction has been obtained for chest deflections, head kinematics and accelerations and for kinematics and accelerations at the upper thoracic vertebra. Recommendations are given for further development and validation of the model, and for validation of models of different body sizes.

[1]  Per Lövsund,et al.  Development and Validation of a Human-Body Mathematical Model for Simulation of Car-Pedestrian Impacts , 1997 .

[2]  S T Tümer,et al.  Three-dimensional kinematic modelling of the human shoulder complex--Part I: Physical model and determination of joint sinus cones. , 1989, Journal of biomechanical engineering.

[3]  L. M. Patrick,et al.  Living Human Dynamic Response to —G x Impact Acceleration II—Accelerations Measured on the Head and Neck , 1969 .

[4]  L Stark,et al.  Estimated mechanical properties of synergistic muscles involved in movements of a variety of human joints. , 1988, Journal of biomechanics.

[5]  A E Engin,et al.  On the biomechanics of human shoulder complex--I. Kinematics for determination of the shoulder complex sinus. , 1987, Journal of biomechanics.

[6]  Wp Wil Koppens,et al.  Comparison of modeling techniques for flexible dummy parts , 1993 .

[7]  A I King,et al.  A MADYMO model of near-side human occupants in side impacts. , 1994, Journal of biomechanical engineering.

[8]  Daniel J. Thomas,et al.  DYNAMIC RESPONSE OF THE HEAD AND NECK OF THE LIVING HUMAN TO -Gx IMPACT ACCELERATION. 1. EXPERIMENTAL DESIGN AND PRELIMINARY EXPERIMENTAL DATA , 1969 .

[9]  A E Engin.  Passive resistive torques about long bone axes of major human joints. , 1979, Aviation, space, and environmental medicine.

[10]  van den Aj Kroonenberg,et al.  A HUMAN MODEL FOR LOW-SEVERITY REAR-IMPACTS , 1997 .

[11]  Riender Happee,et al.  The influence of muscle activity on head-neck response during impact , 1997 .

[12]  L Douglas Baughman.  Development of an Interactive Computer Program to Produce Body Description Data , 1983 .

[13]  Harold J. Mertz,et al.  Size, Weight and Biomechanical Impact Response Requirements for Adult Size Small Female and Large Male Dummies , 1989 .

[14]  D. J. Thomas,et al.  Human Volunteer Head-Neck Response in Frontal Flexion: a New Analysis , 1995 .

[15]  Harold J. Mertz,et al.  Technical Specifications of the SID-IIs Dummy , 1995 .

[16]  R. F. Neathery,et al.  Analysis of chest impact response data and scaled performance recommendations , 1974 .

[17]  Karl Sommer,et al.  Anthropologischer Atlas : Grundlagen und Daten Deutsche Demokratische Republik , 1986 .

[18]  B. Walmsley,et al.  Comparison of stiffness of soleus and medial gastrocnemius muscles in cats. , 1981, Journal of neurophysiology.

[19]  John M. Cavanaugh,et al.  Finite Element Modeling of Gross Motion of Human Cadavers in Side Impact , 1994 .

[20]  A. E. Engin,et al.  On the biomechanics of the shoulder complex. , 1980, Journal of biomechanics.

[21]  Gerald W. Nyquist,et al.  Static bending response of the human lower torso , 1975 .

[22]  Louise A. Obergefell,et al.  Development of Human Articulating Joint Model Parameters for Crash Dynamics Simulations , 1995 .

[23]  A E Engin,et al.  On the biomechanics of human hip complex in vivo--I. Kinematics for determination of the maximal voluntary hip complex sinus. , 1988, Journal of biomechanics.

[24]  C. K. Kroell,et al.  Impact Response of the Human Thorax , 1973 .

[25]  Albert I. King,et al.  An Experimentally Validated Dynamic Model of the Spine , 1974 .

[26]  de Mkj Marko Jager,et al.  A Global and a Detailed Mathematical Model for Head-Neck Dynamics , 1996 .

[27]  Ali Erkan Engin,et al.  Dynamic modelling of human articulating joints , 1983 .

[28]  G. C. Willems,et al.  The Effect of Duration, Rate of Onset, and Peak Sled Acceleration on the Dynamic Response of the Human Head and Neck , 1976 .

[29]  Riender Happee,et al.  Optimisation of vehicle passive safety for occupants with varying anthropometry , 1998 .

[30]  H. J. Woltring,et al.  Omni-Directional Human Head-Neck Response , 1986 .

[31]  R Krist.  RAMSIS - EIN SYSTEM ZUR ERHEBUNG UND VERMESSUNG DREIDIMENSIONALER KOERPERHALTUNGEN VON MENSCHEN ZUR ERGONOMISCHEN AUSLEGUNG VON BEDIEN- UND SITZPLAETZEN IM AUTO. BAND 2. MODELLIERUNG DES SITZKOMFORTS - EINE EXPERIMENTELLE STUDIE , 1995 .

[32]  Ali Erkan Engin,et al.  A statistical investigation of the in vivo biomechanical properties of the human shoulder complex , 1989 .

[33]  Mats Y. Svensson,et al.  Analysis of different head and neck responses in rear-end car collisions using a new humanlike mathematical model , 1994 .

[34]  G. C. Joyce,et al.  The mechanical properties of cat soleus muscle during controlled lengthening and shortening movements , 1969, The Journal of physiology.

[35]  Jikuang Yang,et al.  Computer Simulation of Impact Response of the Human Knee Joint in Car-pedestrian Accidents , 1992 .

[36]  G. C. Willems,et al.  The effect of the initial position of the head and neck on the dynamic response of the human head and neck to -Gx impact acceleration , 1975 .

[37]  I. Kapandji.  The Physiology of the Joints , 1988 .

[38]  A E Engin,et al.  On the biomechanics of human hip complex in vivo--II. Passive resistive properties beyond the hip complex sinus. , 1988, Journal of biomechanics.

[39]  A. M. Krylow,et al.  Dynamic force responses of muscle involving eccentric contraction. , 1997, Journal of biomechanics.

[40]  A Seidl.  RAMSIS - EIN SYSTEM ZUR ERHEBUNG UND VERMESSUNG DREIDIMENSIONALER KOERPERHALTUNGEN VON MENSCHEN ZUR ERGONOMISCHEN AUSLEGUNG VON BEDIEN- UND SITZPLAETZEN IM AUTO. BAND 1. DAS MENSCHMODELL RAMSIS - ANALYSE, SYNTHESE UND SIMULATION DREIDIMENSIONALER KOERPERHALTUNGEN DES MENSCHEN , 1995 .

[41]  Andreas Seidl,et al.  RAMSIS - A New CAD-Tool for Ergonomic Analysis of Vehicles Developed for the German Automotive Industry , 1997 .

[42]  Jac Wismans,et al.  Head-neck response in frontal flexion , 1984 .

[43]  A J van den Bogert,et al.  Modelling of force production in skeletal muscle undergoing stretch. , 1996, Journal of biomechanics.