A methodology for determining complex permittivity of construction materials based on transmission-only coherent, wide-bandwidth free-space measurements

An integrated methodology for determining the unique combination of complex permittivity based on measured transmission coefficient and time difference of arrival (TDOA) information in free-space measurements is proposed. The methodology consists of an estimation procedure of the real part of complex permittivity based on TDOA, and a root-searching procedure based on parametric system identification (SI) together with an error sum of squares (SSE) criterion. Generally, non-unique combinations of dielectric constant and loss factor are encountered when lossy or low-loss materials are measured and the proposed methodology is aimed at the determination of unique combinations of dielectric constant and loss factor for such materials. The proposed methodology is validated by measurements of several materials with known dielectric properties. The estimated complex permittivity values for Teflon, Lexan, Bakelite, and concrete are in good agreement with those reported in the literature. The method has potential for in-situ measurement of dielectric properties for construction materials. Applicability and limitations of the methodology are discussed.

[1]  Jerzy Krupka,et al.  Dielectric characterization of low-loss materials a comparison of techniques , 1998 .

[2]  S. Esterby.  American Society for Testing and Materials , 2006 .

[3]  V. Varadan,et al.  A free-space method for measurement of dielectric constants and loss tangents at microwave frequencies , 1989 .

[4]  Imad L. Al-Qadi,et al.  Dielectric Properties of Portland Cement Concrete at Low Radio Frequencies , 1995 .

[5]  Yi Huang,et al.  Wideband system for measuring dielectric properties of concrete , 2002, International Conference on Ground Penetrating Radar.

[6]  Dai Gil Lee,et al.  Characterization of electromagnetic properties of polymeric composite materials with free space method , 2004 .

[7]  A. Cullen.  A new free-wave method for ferrite measurement at millimeter wavelengths , 1987 .

[8]  Estimating errors due to sample surface roughness in microwave complex permittivity measurements obtained using a coaxial probe , 1995 .

[9]  Neal C. Gallagher,et al.  Massively parallel iterative determination of stratified dielectric parameters from scattered-field measurements , 1993 .

[10]  Oral Buyukozturk,et al.  ELECTROMAGNETIC PROPERTIES OF CONCRETE AT MICROWAVE FREQUENCY RANGE , 1998 .

[11]  J. Zhang,et al.  Extraction of dielectric properties of building materials from free-space time-domain measurement , 1999, MTT/ED/AP/LEO Societies Joint Chapter United Kingdom and Republic of Ireland Section. 1999 High Frequency Postgraduate Student Colloquium (Cat. No.99TH8409).

[12]  Oral Büyüköztürk,et al.  Wideband Microwave Imaging of Concrete for Nondestructive Testing , 2000 .

[13]  J. Aurand.  Measurements of transient electromagnetic propagation through concrete and sand , 1996 .

[14]  K.A. Michalski,et al.  Electromagnetic wave theory , 1987, Proceedings of the IEEE.

[15]  D. V. Krevelen,et al.  Properties of polymers : correlations with chemical structure , 1972 .

[16]  M. Deshpande,et al.  A new approach to estimate complex permittivity of dielectric materials at microwave frequencies using waveguide measurements , 1997 .

[17]  William C. Stone.  NIST Construction Automation Program Report No. 1: Non-Line-of-Sight (NLS) Construction Metrology | NIST , 1996 .

[18]  Munther A. Dahleh,et al.  On system identification of complex systems from finite data , 2001, IEEE Trans. Autom. Control..

[19]  K. A. Jose,et al.  Noncontact broadband microwave material characterization at low and high temperatures , 2000, SPIE Optics + Photonics.

[20]  Thomas M. Antonsen,et al.  Open-ended coaxial probe for high-temperature and broad-band dielectric measurements , 1999 .

[21]  A. M. Nicolson,et al.  Measurement of the Intrinsic Properties of Materials by Time-Domain Techniques , 1970 .