The digital power amplifier for the wireless infrastructure: Status and prospects

In digital paper amplifiers the analog signal is not handled directly but encoded in a pulse train. It is restored only at the output by a bandpass filter. Due to the discretization in amplitude, this principle, often referred to as class S, allows for efficient and versatile amplifiers. While in widespread use for audio frequencies, digital PAs have been introduced at microwave frequencies only a few years ago. The paper reviews the state of the art of such PAs for applications in the wireless infrastructure. The key factors determining transmitter performance are addressed and recent results are presented.

[1]  W. Heinrich,et al.  On Distortion in Digital Microwave Power Amplifiers , 2016 .

[2]  W. Heinrich,et al.  Digital doherty transmitter with envelope ΔΣ modulated class-D GaN power amplifier for 800 MHz band , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[3]  Chul Soon Park,et al.  An efficient voltage-mode class-D power amplifier for digital transmitters with delta-sigma modulation , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[4]  Andreas Wentzel,et al.  RF class-S power amplifiers: State-of-the-art results and potential , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[5]  Chunjie Duan,et al.  A 5-level discrete-time power encoder with measured coding efficiency of 70% for 20-MHz LTE digital transmitter , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[6]  Andreas Wentzel,et al.  A new modulator for digital RF power amplifiers utilizing a wave-table approach , 2016, 2016 46th European Microwave Conference (EuMC).

[7]  Rudiger Quay,et al.  900 MHz pulse-width-modulated class-s power amplifier with improved linearity , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[8]  Baher Haroun,et al.  A 23dBm fully digital transmitter using ΣΔ and pulse-width modulation for LTE and WLAN applications in 45nm CMOS , 2014, 2014 IEEE Radio Frequency Integrated Circuits Symposium.

[9]  Andreas Wentzel,et al.  An 8W GaN-based H-bridge class-D PA for the 900 MHz band enabling ternary coding , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[10]  Liang Rong,et al.  All-digital transmitter based on ADPLL and phase synchronized delta sigma modulator , 2011, 2011 IEEE Radio Frequency Integrated Circuits Symposium.

[11]  Lawrence E. Larson,et al.  H-Bridge Class-D Power Amplifiers for Digital Pulse Modulation Transmitters , 2007, IMS 2007.

[12]  M. Tanio,et al.  A linear and efficient 1-bit digital transmitter with envelope delta-sigma modulation for 700MHz LTE , 2014, 2014 IEEE MTT-S International Microwave Symposium (IMS2014).

[13]  Shinichi Hori,et al.  A 0.7-3GHz envelope ΔΣ modulator using phase modulated carrier clock for multi-mode/band switching amplifiers , 2011, 2011 IEEE Radio Frequency Integrated Circuits Symposium.

[14]  Jong-Gwan Yook,et al.  Hybrid Current-Mode Class-S Power Amplifier With GaN Schottky Diode Using Chip-On-Board Technique for 955 MHz LTE Signal , 2013, IEEE Transactions on Microwave Theory and Techniques.

[15]  Andreas Wentzel,et al.  A flexible GaN MMIC enabling digital power amplifiers for the future wireless infrastructure , 2015, 2015 IEEE MTT-S International Microwave Symposium.

[16]  Alejandro Álvarez Melcón,et al.  Advanced lumped-element filters for digital microwave power amplifiers , 2015 .

[17]  Shinichi Hori,et al.  Digital PA with voltage-mode topology using envelope delta-sigma modulation , 2013, International Journal of Microwave and Wireless Technologies.