Study and modeling of high-density polyethylene coalescence under the extrussion conditions

[1]  E. Lafranche,et al.  Development of bio-based poly(butylene succinate) formulations for microcellular injection foaming , 2019, International Journal of Material Forming.

[2]  Y. Bae,et al.  Thermodynamic analysis of phase equilibrium and surface tension of ternary polymer solutions , 2019, AIChE Journal.

[3]  G. Wang,et al.  Vibration multisensor fusion method for the identification and characterization of sand particles in dispersions of oil in water flow , 2019, Powder Technology.

[4]  I. J. Seabra,et al.  Fabrication of Poly(Glycerol Sebacate)-Poly(ε-Caprolactone) Extrusion-Based Scaffolds for Cartilage Regeneration , 2019, Applied Mechanics and Materials.

[5]  Sung‐Jin Kim,et al.  Influence of surface tension-driven network parameters on backflow strength , 2019, RSC advances.

[6]  Effective surface tension of liquid marbles using controllable nanoparticle monolayers , 2018, Applied Physics Letters.

[7]  A. Allais,et al.  Effect of viscosity and surface tension on dynamic percolation in liquid media , 2018 .

[8]  E. Bartsch,et al.  New insights into re-entrant melting of microgel particles by polymer-induced aggregation experiments. , 2018, Soft matter.

[9]  L. L. Ferrás,et al.  A new double-slit rheometrical die for in-process characterization and extrusion of thermo-mechanically sensitive polymer systems , 2018 .

[10]  Di Zhang,et al.  Effect of alumina coating and extrusion deformation on microstructures and thermal properties of short carbon fibre–Al composites , 2018, Bulletin of Materials Science.

[11]  F. Bakir,et al.  Modelling of sintering during rotational moulding of the thermoplastic polymers , 2016 .

[12]  V. Deshpande,et al.  Processing and characterization of extruded PET and its r-PET and MWCNT nanocomposite thin films by spin coating , 2016, Bulletin of Materials Science.

[13]  Kang Li,et al.  The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE , 2014 .

[14]  Said Lotfi Hafsaoui,et al.  Study of polyamide 12 crystallization behavior within rotational molding process , 2013, Iranian Polymer Journal.

[15]  A. Maffezzoli,et al.  An investigation into sintering of PA6 nanocomposite powders for rotational molding , 2012, Journal of Thermal Analysis and Calorimetry.

[16]  C. Si,et al.  Characterization of pressure fluctuation signals in an acoustic bubbling fluidized bed , 2011 .

[17]  P. Wapperom,et al.  The role of transient rheology in polymeric sintering , 2006 .

[18]  A. Tcharkhtchi,et al.  Structure‐Processibility Relationships During Rotational Moulding of Plastics , 2004 .

[19]  A. Maffezzoli,et al.  Simulation of heat transfer during rotational molding , 2003 .

[20]  Y. Zhou,et al.  An enthalpy-temperature hybrid method for solving phase-change problems and its application to polymer pyrolysis and ignition , 2000 .

[21]  J. Vlachopoulos,et al.  The role of viscoelasticity in polymer sintering , 1998 .

[22]  D. Kee,et al.  The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends , 1996 .

[23]  J. Vlachopoulos,et al.  An experimental study and model assessment of polymer sintering , 1996 .

[24]  M. A. Rao,et al.  Principles of rotational molding , 1972 .

[25]  A. Maazouz,et al.  Relationship between rheological and surface properties for the sintering process of polymers , 2011, Journal of Materials Science.

[26]  J. Shang,et al.  Fatigue crack tip opening behavior in particulate reinforced Al-alloy composites , 1996 .

[27]  F. Thümmler,et al.  The sintering process , 1967 .