Intermetallics Formation, Hardness and Toughness of A413.1 Type Alloys: Role of Melt and Aging Treatments

[1]  A. Samuel,et al.  Hardening of Al–Si–Cu–Mg Cast Alloys: Role of Ag and Zn addition , 2021, International Journal of Metalcasting.

[2]  G. Gumienny,et al.  Microstructural Characteristics of AlSi9Cu3(Fe) Alloy with High Melting Point Elements , 2020, Metals.

[3]  S. Amirkhanlou,et al.  Formation of strength platform in cast Al–Si–Mg–Cu alloys , 2019, Scientific Reports.

[4]  M. Sabatino,et al.  Grain Refinement of Al-Si Alloys: Scientific and Industrial Aspects , 2019 .

[5]  S. Ji,et al.  Grain Refinement of Al–Si–Mg Cast Alloys by Al3Ti3B Master Alloy , 2018 .

[6]  A. Samuel,et al.  Effect of Sr–Grain Refiner–Si Interactions on the Microstructure Characteristics of Al–Si Hypereutectic Alloys , 2018, International Journal of Metalcasting.

[7]  N. H. Babu,et al.  Influence of Cu on modifying the beta phase and enhancing the mechanical properties of recycled Al-Si-Fe cast alloys , 2017, Scientific Reports.

[8]  L. Bolzoni,et al.  Grain Refiner for Al-Si Alloys , 2016 .

[9]  Jili Wu,et al.  Optimizing the tensile properties of Al–11Si–0.3Mg alloys: Role of Cu addition , 2015 .

[10]  K. Richter,et al.  Phase equilibria and structural investigations in the system Al–Fe–Si , 2011, Intermetallics.

[11]  M. Talari,et al.  Microstructure and mechanical properties of Al-Si cast alloy grain refined with Ti-B-Sr-Sc-Mg , 2011, 2011 IEEE Colloquium on Humanities, Science and Engineering.

[12]  F. Samuel,et al.  Precipitation-hardening in cast AL–Si–Cu–Mg alloys , 2010, Journal of Materials Science.

[13]  F. Samuel,et al.  Nucleation of Fe-intermetallic phases in the Al-Si-Fe alloys , 2005 .

[14]  K. E. Nilsen,et al.  The dependence of the β-AlFeSi to α-Al(FeMn)Si transformation kinetics in Al–Mg–Si alloys on the alloying elements , 2005 .

[15]  F. Samuel,et al.  Effect of solution heat treatment and additives on the hardness, tensile properties and fracture behaviour of Al-Si (A413.1) automotive alloys , 2003 .

[16]  Sun Yu,et al.  Restraining effect of strontium on the crystallization of Mg2Si phase during solidification in Al–Si–Mg casting alloys and mechanisms , 2003 .

[17]  H. Ye,et al.  An overview of the development of Al-Si-Alloy based material for engine applications , 2003 .

[18]  C. H. Cáceres,et al.  Strength-Ductility Behaviour of Al-Si-Cu-Mg Casting Alloys in T6 Temper , 2003 .

[19]  F. Samuel,et al.  Iron intermetallic phases in the Al corner of the Al-Si-Fe system , 2003 .

[20]  F. Samuel,et al.  Iron intermetallic phases in the Al corner of the Al-Si-Fe system , 2003 .

[21]  D. Apelian,et al.  Casting Characteristics of Aluminum Die Casting Alloys , 2002 .

[22]  Zi-kui Liu,et al.  Thermodynamic assessment of the Al-Fe-Si system , 1999 .

[23]  D. Apelian,et al.  Effect of solution treatment parameters on tensile properties of cast aluminum alloys , 1990 .

[24]  A. Hellawell.  The Crystal Chemistry and Physics of Metals and Alloys , 1973 .

[25]  H. Phillips.  Annotated equilibrium diagrams of some aluminium alloy systems , 1959 .

[26]  B. Andilab.  In-Situ Analysis Of Incipient Melting And Characterization Of A Novel Al-Cu Alloy for Cylinder Head Applications , 2022 .