A novel Stewart-type parallel mechanism with topological reconfiguration: Design, kinematics and stiffness evaluation
暂无分享,去创建一个
Fengfeng Xi | Huiping Shen | Jingjing You | Xiaolong Yang | Jieyu Wang | F. Xi | Huiping Shen | Xiaolong Yang | Jieyu Wang | Jingjing You
[1] S. Parasuraman,et al. Dynamic Analysis of Compliant LEG of a Stewart-Gough Type Parallel Mechanism , 2019, 2019 IEEE Student Conference on Research and Development (SCOReD).
[2] Ahmad Kalhor,et al. A new development of homotopy continuation method, applied in solving nonlinear kinematic system of equations of parallel mechanisms , 2015, 2015 3rd RSI International Conference on Robotics and Mechatronics (ICROM).
[3] Tian Huang,et al. Stiffness estimation of a parallel kinematic machine , 2001 .
[4] F. Jovane,et al. Reconfigurable Manufacturing Systems , 1999 .
[5] Lubin Hang,et al. Composition Principle Based on Single-Open-Chain Unit for General Spatial Mechanisms and Its Application—In Conjunction With a Review of Development of Mechanism Composition Principles , 2018, Journal of Mechanisms and Robotics.
[6] Y Cao,et al. Research on the orientation-singularity and orientation-workspace of a class of Stewart—Gough parallel manipulators , 2010 .
[7] L. W. Tsai,et al. Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .
[8] H. Tokunaga. Triple coverings of algebraic surfaces according to the Cardano formula , 1991 .
[9] Rongqiang Liu,et al. Mobility Analysis of the Threefold-Symmetric Bricard Linkage and Its Network , 2020 .
[10] Jian Wang,et al. Workspace evaluation of Stewart platforms , 1994, Adv. Robotics.
[11] Guoliang Xiong,et al. Design and analysis of a re-configurable parallel robot , 2006 .
[12] Beno Benhabib,et al. A Review of Redundant Parallel Kinematic Mechanisms , 2017, J. Intell. Robotic Syst..
[13] Fengfeng Xi,et al. Design and analysis of reconfigurable parallel robots with enhanced stiffness , 2014 .
[14] Andrew Philippides,et al. On the False Positives and False Negatives of the Jacobian Matrix in Kinematically Redundant Parallel Mechanisms , 2020, IEEE Transactions on Robotics.
[15] Clément Gosselin,et al. Redundancy in Parallel Mechanisms: A Review , 2018 .
[16] M. Callegari,et al. A new class of reconfigurable parallel kinematic machines , 2014 .
[17] Fengfeng Xi,et al. Holonomic under-actuation of parallel robots with topological reconfiguration , 2016 .
[18] Y. Shneor,et al. Workspace of parallel kinematics machines with minimum stiffness limits: Collinear stiffness value based approach , 2012 .
[19] Dan Zhang,et al. Global stiffness modeling and optimization of a 5-DOF parallel mechanism , 2009, 2009 International Conference on Mechatronics and Automation.
[20] Placid Mathew Ferreira,et al. Computation of stiffness and stiffness bounds for parallel link manipulators 1 This research was sup , 1999 .
[21] V. T. Portman. Stiffness Evaluation of Machines and Robots: Minimum Collinear Stiffness Value Approach , 2011 .
[22] Mehmet Çevik,et al. Improved trajectory planning of an industrial parallel mechanism by a composite polynomial consisting of Bézier curves and cubic polynomials , 2019, Mechanism and Machine Theory.
[23] Andrew Philippides,et al. A robust geometric method of singularity avoidance for kinematically redundant planar parallel robot manipulators , 2020 .
[24] Clément Gosselin,et al. Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..
[25] Fengfeng Xi,et al. Decoupling Algorithm and Maximum Operation Frequency of a Novel Parallel Type Six-Axis Accelerometer , 2020, IEEE Sensors Journal.
[26] Kun Ma,et al. Stiffness analysis of a metamorphic parallel mechanism with three configurations , 2019 .
[27] Fengfeng Xi,et al. Statically redundant parallel robots , 2016 .
[28] Xianwen Kong,et al. Type synthesis of single-DOF single-loop mechanisms with two operation modes , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.
[29] Fengfeng Xi,et al. Module-based method for design and analysis of reconfigurable parallel robots , 2010, 2010 IEEE International Conference on Mechatronics and Automation.
[30] Jian S. Dai,et al. Mobility Change in Two Types of Metamorphic Parallel Mechanisms , 2009 .
[31] Hermes Giberti,et al. Cheope: A new reconfigurable redundant manipulator , 2010 .
[32] Herman Bruyninckx. Forward kinematics for Hunt–Primrose parallel manipulators , 1999 .
[33] Ju Li,et al. A Translational Three-Degrees-of-Freedom Parallel Mechanism With Partial Motion Decoupling and Analytic Direct Kinematics , 2020, Journal of Mechanisms and Robotics.
[34] Dongming Gan,et al. Unified kinematics and optimal design of a 3rRPS metamorphic parallel mechanism with a reconfigurable revolute joint , 2016 .
[35] Sungchul Lee,et al. Kinematic Optimization of a Redundantly Actuated Parallel Mechanism for Maximizing Stiffness and Workspace Using , 2011 .
[36] V. Portman. Wrench transformation technique for robot stiffness evaluation: Direct sum based solution and application to kinetostatic indices , 2020 .