Seismic response of multistory reinforced concrete frame with vertical mass and stiffness irregularities

SUMMARY Irregular buildings behave differently as compared with regular buildings. Seismic design codes have quantified the irregularities in terms of magnitude only ignoring the effect of irregularity location. In the present study, a single parameter to quantify mass, stiffness and strength irregularity in terms of both magnitude and location is proposed on the basis of the dynamic characteristics of the building. Furthermore, building models with different types of irregularity with variation in magnitude and location of irregularity are analyzed by subjecting them to an ensemble of 27 ground motions to create a seismic response databank. In the analysis, the torsional effects generated due to irregularities in the building systems (as per EC 8:2004 provisions) are included. On the basis of regression analysis conducted on this seismic response databank, equations to estimate seismic response parameters such as fundamental period, maximum roof displacement and maximum inter-story drift ratio etc. are proposed for the irregular buildings in terms of the proposed irregularity index. Finally, applicability of the proposed equations is discussed in brief, and these equations are validated for 2D and 3D building models. Copyright © 2012 John Wiley & Sons, Ltd.

[1]  Amr S. Elnashai,et al.  Seismic response of composite frames—II. Calculation of behaviour factors , 1996 .

[2]  Farzin Zareian,et al.  Relative safety of high-rise and low-rise steel moment-resisting frames in Los Angeles , 2009 .

[3]  Jack P. Moehle,et al.  Seismic Response of Vertically Irregular Structures , 1984 .

[4]  Gerardo M. Verderame,et al.  Analytical investigation of elastic period of infilled RC MRF buildings , 2011 .

[5]  Amr S. Elnashai,et al.  Overstrength and force reduction factors of multistorey reinforced‐concrete buildings , 2002 .

[6]  Meng-Hao Tsai,et al.  Progressive Collapse Analysis of an RC Building with Exterior Non-Structural Walls , 2011 .

[7]  S. Akkar,et al.  Dynamic Instability of Simple Structural Systems , 2003 .

[8]  Gregory G. Deierlein,et al.  Seismic Collapse Safety of Reinforced Concrete Buildings. II: Comparative Assessment of Nonductile and Ductile Moment Frames , 2011 .

[9]  Eric B. Williamson,et al.  Evaluation of Damage and P-Δ Effects for Systems Under Earthquake Excitation , 2003 .

[10]  Byong Jeong Choi,et al.  Hysteretic energy response of steel moment‐resisting frames with vertical mass irregularities , 2004 .

[11]  Dimitrios G. Lignos,et al.  Sidesway collapse of deteriorating structural systems under seismic excitations , 2008 .

[12]  Paul C. Jennings,et al.  Collapse of a model for ductile reinforced concrete frames under extreme earthquake motions , 1980 .

[13]  Anil K. Chopra,et al.  Period formulas for moment-resisting frame buildings , 1997 .

[14]  Curt B. Haselton,et al.  Seismic Collapse Safety and Behavior of Modern Reinforced Concrete Moment Frame Buildings , 2007 .

[15]  Jack P. Moehle,et al.  Seismic Analysis Methods for Irregular Buildings , 1986 .

[16]  Timothy J. Sullivan,et al.  Towards a simplified Direct DBD procedure for the seismic design of moment resisting frames with viscous dampers , 2012 .

[17]  J. Baker,et al.  A vector‐valued ground motion intensity measure consisting of spectral acceleration and epsilon , 2005 .

[18]  Jinkoo Kim,et al.  Use of rotational friction dampers to enhance seismic and progressive collapse resisting capacity of structures , 2011 .

[19]  Anil K. Chopra,et al.  A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings , 2004 .

[20]  W. B. Joyner,et al.  Equations for Estimating Horizontal Response Spectra and Peak Acceleration from Western North American Earthquakes: A Summary of Recent Work , 1997 .

[21]  Masanobu ShinozukaPrincipal Investigator Earthquake Engineering Research Center , 2014 .

[22]  Mehrdad Sasani,et al.  Progressive collapse analysis of an RC structure , 2008 .

[23]  Robert G. Driver,et al.  Estimating fundamental periods of steel plate shear walls , 2011 .

[24]  Anil K. Chopra,et al.  SEISMIC RESPONSE OF VERTICALLY IRREGULAR FRAMES: RESPONSE HISTORY AND MODAL PUSHOVER ANALYSES , 2004 .

[25]  Theodore L. Karavasilis,et al.  Estimation of seismic inelastic deformation demands in plane steel MRF with vertical mass irregularities , 2008 .

[26]  James M. Nau,et al.  Seismic Response of Building Frames with Vertical Structural Irregularities , 1997 .

[27]  James M. Nau,et al.  Seismic Design Aspects of Vertically Irregular Reinforced Concrete Buildings , 2003 .

[28]  L. Ibarra Global collapse of frame structures under seismic excitations , 2003 .

[29]  Dionisio Bernal,et al.  Amplification factors for inelastic dynamicp? effects in earthquake analysis , 1987 .

[30]  S. E. Ruiz,et al.  The Mexico Earthquake of September 19, 1985—The Seismic Performance of Buildings with Weak First Storey , 1989 .

[31]  Bruce Deam,et al.  Determination of Acceptable Structural Irregularity Limits for the Use of Simplified Seismic Design Methods , 2008 .

[32]  D. J. Laurie Kennedy,et al.  Displacement-based seismic design of buildings—theory , 2000 .

[33]  Anil K. Chopra,et al.  A modal pushover analysis procedure for estimating seismic demands for buildings , 2002 .

[34]  Mehmet Metin Kose,et al.  Parameters affecting the fundamental period of RC buildings with infill walls , 2009 .

[35]  Curt B. Haselton,et al.  Assessing seismic collapse safety of modern reinforced concrete moment frame buildings , 2006 .

[36]  Jinkoo Kim,et al.  Progressive collapse performance of irregular buildings , 2011 .

[37]  Young-Ho Lee,et al.  Progressive collapse resisting capacity of tube‐type structures , 2009 .

[38]  Dimitrios Vamvatsikos,et al.  Incremental dynamic analysis , 2002 .

[39]  Meng-Hao Tsai A performance-based design approach for retrofitting regular building frames with steel braces against sudden column loss , 2012 .

[40]  Robert Tremblay,et al.  Seismic Performance of Concentrically Braced Steel Frames in Multistory Buildings with Mass Irregularity , 2005 .

[41]  Behrouz Shafei,et al.  A simplified method for collapse capacity assessment of moment-resisting frame and shear wall structural systems , 2011 .

[42]  Curt B. Haselton,et al.  Seismic Collapse Safety of Reinforced Concrete Buildings. I: Assessment of Ductile Moment Frames , 2011 .

[43]  Dimitrios Vamvatsikos,et al.  Applied Incremental Dynamic Analysis , 2004 .

[44]  M. S. Medhekar,et al.  Displacement-based seismic design of buildings-application , 2000 .