论文信息 - A transmission-line model for ceramic capacitors for CAD tools based on measured parameters

A transmission-line model for ceramic capacitors for CAD tools based on measured parameters

An efficient and accurate transmission-line model for discrete MLC capacitors is developed. Hardware measurement techniques are used to obtain the circuit parameters for the model components. Low inductance measurement fixtures are required to observe and measure the transmission line parameters. The simulated impedance vs frequency results match closely with hardware measurements in the capacitance, resistance and inductance portions of the transfer impedance curve. The transmission-line model is well suited for CAD tools that are used to design power distribution systems.

D. Hockanson | L. D. Smith | K. Kothari

[1] G. A. Hjellen,et al. Including dielectric loss in printed circuit models for improved EMI/EMC predictions , 1997 .

[2] T. Roy,et al. Power plane decoupling strategy for high speed processor boards , 1999, IEEE 8th Topical Meeting on Electrical Performance of Electronic Packaging (Cat. No.99TH8412).

[3] Li. Distributred models for multi-terminal capacitors-using 2D lossy transmission-line approach , 2001 .

[4] A. Scarlatti,et al. An equivalent transmission-line model containing dispersion for high-speed digital lines-with an FDTD implementation , 2001 .

[5] William D. Brown,et al. A study of the high frequency performance of thin film capacitors for electronic packaging , 2000, ECTC 2000.

[6] H. Heeb,et al. On the effectiveness of decoupling capacitors in reducing EM radiation from PCBs , 1993, 1993 International Symposium on Electromagnetic Compatibility.

[7] D. Hockanson,et al. Distributed SPICE circuit model for ceramic capacitors , 2001, 2001 Proceedings. 51st Electronic Components and Technology Conference (Cat. No.01CH37220).