Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features

Abstract In the present work, the densification and microstructural evolution during direct laser sintering of metal powders were studied. Various ferrous powders including Fe, Fe–C, Fe–Cu, Fe–C–Cu–P, 316L stainless steel, and M2 high-speed steel were used. The empirical sintering rate data was related to the energy input of the laser beam according to the first order kinetics equation to establish a simple sintering model. The equation calculates the densification of metal powders during direct laser sintering process as a function of operating parameters including laser power, scan rate, layer thickness and scan line spacing. It was found that when melting/solidification approach is the mechanism of sintering, the densification of metals powders ( D ) can be expressed as an exponential function of laser specific energy input ( ψ ) as ln(1 −  D ) = − Kψ . The coefficient K is designated as “densification coefficient”; a material dependent parameter that varies with chemical composition, powder particle size, and oxygen content of the powder material. The mechanism of particle bonding and microstructural features of the laser sintered powders are addressed.

[1]  Abdolreza Simchi,et al.  Effect of sintering atmosphere and carbon content on the densification and microstructure of laser-sintered M2 high-speed steel powder , 2005 .

[2]  C. Sutcliffe,et al.  Investigation of short pulse Nd: YAG laser interaction with stainless steel powder beds , 1998 .

[3]  Abdolreza Simchi,et al.  Effects of laser sintering processing parameters on the microstructure and densification of iron powder , 2003 .

[4]  L. Froyen,et al.  Production and properties of dense iron-based parts produced by laser melting with plasma formation , 2004 .

[5]  Andreas Gebhardt,et al.  Rapid prototyping , 2003 .

[6]  Randall M. German,et al.  Liquid Phase Sintering , 1985 .

[7]  Lin Li,et al.  The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication , 2004 .

[8]  David L. Bourell,et al.  Selective laser sintering of metals and ceramics , 1992 .

[9]  Abdolreza Simchi,et al.  Densification and microstructural evaluation during laser sintering of M2 high speed steel powder , 2004 .

[10]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[11]  Rémy Glardon,et al.  Sintering of commercially pure titanium powder with a Nd:YAG laser source , 2003 .

[12]  Jouni Hänninen.  DMLS moves from rapid tooling to rapid manufacturing , 2001 .

[13]  Fritz B. Prinz,et al.  Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC , 2000 .

[14]  Amir Faghri,et al.  Melting of a subcooled mixed powder bed with constant heat flux heating , 1999 .

[15]  I. Chang,et al.  Selective laser sintering of gas and water atomized high speed steel powders , 1999 .

[16]  S. Yamazaki,et al.  Phenomenological Studies in Laser Cladding. Part I. Time-Resolved Measurements of the Absorptivity of Metal Powder , 1993 .

[17]  Haseung Chung,et al.  Numerical modeling of scanning laser-induced melting, vaporization and resolidification in metals subjected to step heat flux input , 2004 .

[18]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[19]  L. Shaw,et al.  Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders , 2004 .

[20]  Abdolreza Simchi,et al.  The role of particle size on the laser sintering of iron powder , 2004 .

[21]  Gabriel Bugeda Miguel Cervera,et al.  Numerical prediction of temperature and density distributions in selective laser sintering processes , 1999 .

[22]  Carl Deckard,et al.  Advances in modeling the effects of selected parameters on the SLS process , 1998 .

[23]  Abdolreza Simchi,et al.  On the development of direct metal laser sintering for rapid tooling , 2003 .

[24]  C. Hauser,et al.  Atmospheric Control during Direct Selective Laser Sintering of Stainless Steel 314 S powder , 2008 .

[25]  A. Simchi,et al.  Direct laser sintering of iron–graphite powder mixture , 2004 .