A numerical investigation was conducted to study the heat and mass transfer between a falling film of calcium chloride desiccant solution and a parallel flow of air in a rectangular fin-tube arrangement. A control volume finite difference method was used to solve the governing equations for the air and the liquid desiccant solution subjected to the appropriate boundary conditions. A model was used to predict temperature distribution on the fin surface. In this model, two approaches were employed to determine the temperature distribution of the fin surface. The first approach utilized the analytical expression for the temperature distribution of a circular fin having the same area as the rectangular fin. The second approach used a finite difference algorithm to directly predict the temperature distribution of the rectangular fin surface. Both approaches were used to study the performance of the fin-tube arrangement for dehumidification of air at various operating conditions. The effects on the air dehumidification process, due to changing the inlet conditions of air and desiccant film; their mass flow rates; and the fin height were predicted. The results were used to developed correlations to predict the heat and mass transfer coeffiecients (on the airside) between the air and the liquid desiccant. These correlations can accurately be used to predict the outlet air and liquid desiccant conditions from the fin-tube arrangement. Correlations were developed to predict the rate of heat and mass transfer between the air and the desiccant film. Several numerical experiments showed agreement with the available data in literature.
[1]
Moustafa M. Elsayed.
Analysis of air dehumidification using liquid desiccant system
,
1994
.
[2]
D. P. Sekulic,et al.
Extended surface heat transfer
,
1972
.
[3]
A. T. Conlisk,et al.
Analytical solutions for the heat and mass transfer in a falling film absorber
,
1995
.
[4]
John R. Howell,et al.
Numerical and experimental results for coupled heat and mass transfer between a desiccant film and air in cross-flow
,
1994
.
[5]
G. Grossman,et al.
A packed bed dehumidifier/regenerator for solar air conditioning with liquid desiccants
,
1980
.
[6]
S. Patankar.
Numerical Heat Transfer and Fluid Flow
,
2018,
Lecture Notes in Mechanical Engineering.
[7]
A. S. Rahmah.
Heat and mass transfer between air and a falling film of desiccant solution in a fin-tube arrangement
,
1997
.
[8]
Moustafa M. Elsayed,et al.
A numerical solution for cooling and dehumidification of air by a falling desiccant film in parallel flow
,
1998
.
[9]
George O.G. Löf,et al.
Coefficients of Heat and Mass Transfer in a Packed Bed Suitable for Solar Regeneration of Aqueous Lithium Chloride Solutions
,
1984
.