论文信息 - Comparison of Different Simulation Approaches in Ring-Core Method

Comparison of Different Simulation Approaches in Ring-Core Method

Ring-Core, a semi-destructive method enables measurement of the residual stresses inside the material by the sensor attached at the top of the specimen. Such stress reconstruction requires proper determination of the calculation coefficients. Thus the simulation model for finite elements analyzes is created by means of two different commercial software. Subsequently both simulation results are compared experimentally by measurement on the specimen loaded by known uniaxial state of stress.

František Trebuňa | Tomáš Lipták | Patrik Šarga | František Menda

[1] Erik Prada,et al. SolidWorks API for Ring-Core simulations , 2014, 2014 IEEE 12th International Symposium on Applied Machine Intelligence and Informatics (SAMI).

[2] L. Bertelli,et al. Integral Method Coefficients and Regularization Procedure for the Ring-Core Residual Stress Measurement Technique , 2014 .

[3] David von Mirbach. Hole-Drilling Method for Residual Stress Measurement - Consideration of Elastic-Plastic Material Properties , 2013 .

[4] Patrik Šarga,et al. Analysis of Measuring Chain for Evaluating Residual Stresses by Ring-Core Method , 2013 .

[5] František Trebuňa,et al. Determination of the Necessary Geometric Parameters of the Specimen in Ring-Core Method , 2013 .

[6] Albert S. Kobayashi,et al. Handbook on experimental mechanics , 1987 .

[7] L. Bertelli,et al. AN AUTOMATIC SYSTEM FOR MEASURING RESIDUAL STRESSES BY THE RING-CORE METHOD , 2012 .

[8] Bernardo Zuccarello,et al. Optimization of depth increment distribution in the ring-core method , 1996 .

[9] František Trebuňa,et al. Estimation of Residual Stress Field Uniformity when Using the Ring-Core Method , 2014 .