Additive Manufacturing for Sustainability of Composite Materials Production

[1]  M. Svanström,et al.  Prospective study of lignin-based and recycled carbon fibers in composites through meta-analysis of life cycle assessments , 2019, Journal of Cleaner Production.

[2]  R. J. Friel,et al.  Multifunctional metal matrix composites with embedded printed electrical materials fabricated by ultrasonic additive manufacturing , 2017 .

[3]  H. Kim,et al.  Design and manufacture of automotive composite front bumper assemble component considering interfacial bond characteristics between over-molded chopped glass fiber polypropylene and continuous glass fiber polypropylene composite , 2020 .

[4]  Mickaël Rivette,et al.  Integrated product-process design: Material and manufacturing process selection for additive manufacturing using multi-criteria decision making , 2018, Robotics and Computer-Integrated Manufacturing.

[5]  Yusheng Shi,et al.  Corrosion Behavior of the S136 Mold Steel Fabricated by Selective Laser Melting , 2018, Chinese Journal of Mechanical Engineering.

[6]  Luis Reis,et al.  Selective laser melting (SLM) and topology optimization for lighter aerospace componentes , 2016 .

[7]  Michele Calì,et al.  A New Generation of Bio-Composite Thermoplastic Filaments for a More Sustainable Design of Parts Manufactured by FDM , 2020, Applied Sciences.

[8]  Claus Emmelmann,et al.  Laser Additive Manufacturing and Bionics: Redefining Lightweight Design , 2011 .

[9]  Krassimir Dotchev,et al.  Recycling of polyamide 12 based powders in the laser sintering process , 2009 .

[10]  J. Gonzalez-Gutierrez,et al.  Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing , 2019, Polymers.

[11]  Wenshu Yang,et al.  Microstructure and tensile properties of 5083 Al matrix composites reinforced with graphene oxide and graphene nanoplates prepared by pressure infiltration method , 2018, Composites Part A: Applied Science and Manufacturing.

[12]  Amit Bandyopadhyay,et al.  Additive manufacturing of compositionally gradient metal-ceramic structures: Stainless steel to vanadium carbide , 2018 .

[13]  J. Walker,et al.  The processing and properties of discontinuously reinforced aluminum composites , 1991 .

[14]  A. Hehr,et al.  A comprehensive review of ultrasonic additive manufacturing , 2019 .

[15]  Vijay Tambrallimath,et al.  Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process , 2019, Composites Communications.

[16]  Christoph Weder,et al.  Reinforcement of stereolithographic resins for rapid prototyping with cellulose nanocrystals. , 2012, ACS applied materials & interfaces.

[17]  Yusheng Shi,et al.  Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties , 2019, Materials & Design.

[18]  Dai Gil Lee,et al.  Composite side-door impact beams for passenger cars , 1997 .

[19]  Rob Boom,et al.  Recycling of composite materials , 2012 .

[20]  T. R. Paul,et al.  Mechanical properties and wear behavior of fly ash particle reinforced Al matrix composites , 2020, Materials Research Express.

[21]  Fernando Fraternali,et al.  Metal matrix composite from recycled materials by using additive manufacturing assisted investment casting , 2019, Composite Structures.

[22]  M. Zaeh,et al.  A New Approach for a Flexible Powder Production for Additive Manufacturing , 2016 .

[23]  Ian Gibson,et al.  Effects of graphite powder on the laser sintering behaviour of polycarbonate , 2002 .

[24]  A. Macke,et al.  Metal Matrix Composites Offer Automotive Industry Opportunity to Reduce Vehicle Weight, Improve Performance , 2012, AM&P Technical Articles.

[25]  Alfredo Anglani,et al.  Additive manufacturing integration with topology optimization methodology for innovative product design , 2017 .

[26]  N. Soltani,et al.  Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives , 2016 .

[27]  Carola Esposito Corcione,et al.  Fused Deposition Modeling (FDM): An innovative technique aimed at reusing Lecce stone waste for industrial design and building applications , 2018 .

[28]  A. Todoroki,et al.  Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation , 2016, Scientific Reports.

[29]  Ryan B. Wicker,et al.  Functionalizing stereolithography resins: effects of dispersed multi‐walled carbon nanotubes on physical properties , 2006 .

[30]  Rolf Steinhilper,et al.  Comparative Life Cycle Assessment of Conventional and Additive Manufacturing in Mold Core Making for CFRP Production , 2017 .

[31]  M. Park,et al.  Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography , 2019, Materials & Design.

[32]  Xiaoliang Shi,et al.  Enhancing the tribological properties of NiAl based nano-composites for aerospace bearing applications , 2019, Materials Research Express.

[33]  J. Kruth,et al.  Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites , 2019, CIRP Annals.

[34]  Kriskrai Sitthiseripratip,et al.  Fabrication of three-dimensional honeycomb structure for aeronautical applications using selective laser melting: a preliminary investigation , 2014 .

[35]  W. Tillmann,et al.  Diamond-impregnated 316L metal matrix composites fabricated by powder bed fusion with laser beam - Influences of the energy input on the microstructural properties , 2020 .

[36]  Tai-Yan Kam,et al.  Reliability analysis of composite wind turbine blades considering material degradation of blades , 2020 .

[37]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[38]  Andrew J. Capel,et al.  Solid-state additive manufacturing for metallized optical fiber integration , 2015 .

[39]  Li Yang,et al.  Design for Additively Manufactured Lightweight Structure: A Perspective , 2016 .

[40]  Liu Tengfei,et al.  Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites , 2017 .

[41]  A. Lystrup,et al.  Composite Materials for Wind Power Turbine Blades , 2005, Renewable Energy.

[42]  Olivier Mantaux,et al.  Recovery and reuse of discontinuous carbon fibres by solvolysis: Realignment and properties of remanufactured materials , 2017 .

[43]  J. Coleman,et al.  Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: Powder synthesis and prepared composite characteristics , 2016 .

[44]  D. Gardner,et al.  Closed-loop recycling of polyamide12 powder from selective laser sintering into sustainable composites , 2018, Journal of Cleaner Production.

[45]  D. Gu,et al.  Preparation method and underlying mechanism of MWCNTs/Ti6Al4V nanocomposite powder for selective laser melting additive manufacturing , 2020 .

[46]  Y. Ko,et al.  Corrigendum: Somatic Mutations and Genetic Variants of NOTCH1 in Head and Neck Squamous Cell Carcinoma Occurrence and Development , 2016, Scientific Reports.

[47]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[48]  Zan Li,et al.  Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars , 2017, Acta Materialia.

[49]  H. K. Verma,et al.  Recycling of dimensional stone waste in concrete: A review , 2016 .

[50]  Z. Eckel,et al.  Additive manufacturing of polymer‐derived ceramic matrix composites , 2020, Journal of the American Ceramic Society.

[51]  L. Lessard,et al.  Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance , 2019, Materials.

[52]  E. Toyserkani,et al.  Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites , 2020 .

[53]  E. Bayraktar,et al.  Comprehensive analysis and manufacture of recycled aluminum based hybrid metal matrix composites through the combined method; sintering and sintering + forging , 2020 .

[54]  A. Ragauskas,et al.  Stereolithography 3D Printing of Lignin-Reinforced Composites with Enhanced Mechanical Properties , 2019, ACS omega.

[55]  C. Yan,et al.  Enhanced nanohardness and new insights into texture evolution and phase transformation of TiAl/TiB2 in-situ metal matrix composites prepared via selective laser melting , 2017 .

[56]  Ian Gibson,et al.  A review of laser engineered net shaping (LENS) build and process parameters of metallic parts , 2020 .

[57]  Sujit Das,et al.  Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components , 2016 .

[58]  Anna Björklund,et al.  Environmental performance of self-reinforced composites in automotive applications — Case study on a heavy truck component , 2016 .

[59]  D. Ayre.  Technology advancing polymers and polymer composites towards sustainability: A review , 2018, Current Opinion in Green and Sustainable Chemistry.

[60]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[61]  S. Krishnan,et al.  The use of containerless processing in researching reactive materials , 1991 .

[62]  A. Kalamdhad,et al.  Recent advances in removal of lignin from paper industry wastewater and its industrial applications - A review. , 2020, Bioresource technology.

[63]  Kerry Kirwan,et al.  Producer responsibility: Defining the incentive for recycling composite wind turbine blades in Europe , 2012 .

[64]  Dongyun Zhang,et al.  Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure. , 2019, Journal of the mechanical behavior of biomedical materials.

[65]  Mohsen Attaran,et al.  The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing , 2017 .

[66]  H. Xiaodong,et al.  Evaluation of the performance of the composite bamboo/epoxy laminated material for wind turbine blades technology. , 2014 .

[67]  Ad van Wijk,et al.  The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach , 2018 .

[68]  Mo Song,et al.  Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes , 2013 .

[69]  Stephen Pickering,et al.  Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres , 2017 .

[70]  Daniel Roy Eyers,et al.  Digital manufacturing for spare parts: scenarios for the automotive supply chain , 2017 .

[71]  Pramod Kumar,et al.  Synthesis and mechanical characterization of biomass fly ash strengthened aluminium matrix composites , 2020 .

[72]  Yingguang Li,et al.  A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures , 2018 .

[73]  Katsuyoshi Kondoh,et al.  New Process to Fabricate Magnesium Composites Using SiO2 Glass Scraps , 2003 .

[74]  A. Singh,et al.  Improved mechanical performance of bisphenol-A graphene-oxide nano-composites , 2018 .

[75]  Ya Mei Zhang,et al.  Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo , 2012, European Journal of Wood and Wood Products.