Machinability of stone-plastic materials during diamond planing

This paper investigated the machinability of a stone–plastic composite (SPC) via orthogonal cutting with diamond cutters. The objective was to determine the effect of cutting depth on its machinabi ...

[1]  Jan Valíček,et al.  Experimental Study of Surface Roughness of Wood Plastic Composites after Turning , 2013 .

[2]  Sandy To,et al.  Effect of cutting parameters on heat generation in ultra-precision milling of aluminum alloy 6061 , 2015 .

[3]  E. Wörner,et al.  More efficient cutting processes due to the heat-spreading effect of CVD diamond , 2003 .

[4]  Mohammad Iqbal,et al.  Cutting temperature in high speed milling of silicon carbide using diamond coated tool , 2015 .

[5]  Rui F. Silva,et al.  Cutting forces evolution with tool wear in sintered hardmetal turning with CVD diamond , 2003 .

[6]  Bradley Howell Jared,et al.  Investigation of the direction of chip motion in diamond turning , 2001 .

[7]  Peng Zhang,et al.  Effect of cutting parameters on surface quality during diamond turning of micro-prism array , 2017 .

[8]  F. Veniali,et al.  The mechanisms of material removal in the fluidized bed machining of polyvinyl chloride substrates , 2013 .

[9]  William A. Goddard,et al.  Thermal conductivity of diamond and related materials from molecular dynamics simulations , 2000 .

[10]  Andrew Makeev,et al.  Characterization of stress–strain behavior of composites using digital image correlation and finite element analysis , 2016 .

[11]  Mats Ekevad,et al.  The effects of cutting parameters and tool geometry on cutting forces and tool wear in milling high-density fiberboard with ceramic cutting tools , 2017 .

[12]  M. Bonnet,et al.  Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements , 2008 .

[13]  A. Romański,et al.  Effect of Friction Coefficient on Diamond Retention Capabilities in Diamond Impregnated Tools , 2009 .

[14]  Mats Ekevad,et al.  The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood , 2018 .

[15]  Shen Dong,et al.  Feed Rate and Depth of Cut Influence on Cutting Forces in Diamond Turning Aluminium Alloy , 2004 .

[16]  Ralf Schweizer,et al.  Metal Cutting Principles , 2016 .

[17]  Irineu Mazzaro,et al.  Diamond thermal expansion measurement using transmitted X-ray back-diffraction. , 2005, Journal of synchrotron radiation.

[18]  H. Ando,et al.  Application of diamond-coated cutting tools , 1995 .

[19]  黄志贵.  Fast-fixed stone plastic clad plate , 2007 .

[20]  Arshad Noor Siddiquee,et al.  A review of turning of hard steels used in bearing and automotive applications , 2014 .

[21]  Jaby Mohammed,et al.  Optimization of Process Parameters in Diamond Abrasive Machining of Carbon Fiber-Reinforced Epoxy , 2014 .

[22]  Reza Mikaeil,et al.  The effect of machining parameters on force signal and tool wear in stone cutting , 2011 .

[23]  Demeng Che,et al.  Chip Formation and Force Responses in Linear Rock Cutting: An Experimental Study , 2017 .

[24]  Mats Ekevad,et al.  Cutting Forces and Chip Morphology during Wood Plastic Composites Orthogonal Cutting , 2014 .

[25]  Mats Ekevad,et al.  Tool Wear and Machined Surface Roughness during Wood Flour/Polyethylene Composite Peripheral Up-milling using Cemented Tungsten Carbide Tools , 2014 .

[26]  S. Chowdhury,et al.  Hardness measurement of CVD diamond coatings on SiC substrates , 2005 .