Resin Flow of an Advanced Grid-Stiffened Composite Structure in the Co-Curing Process

[1]  Suresh G. Advani,et al.  Resin flow analysis with fiber preform deformation in through thickness direction during Compression Resin Transfer Molding , 2010 .

[2]  Suresh G. Advani,et al.  Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding , 2007 .

[3]  Z. Zhang,et al.  Numerical Simulation of Flow and Compaction During the Cure of Laminated Composites , 2007 .

[4]  Troy E. Meink,et al.  Manufacturing theory for advanced grid stiffened structures , 2002 .

[5]  V. V. Vasiliev,et al.  Anisogrid lattice structures : survey of development and application , 2001 .

[6]  S. Hoa,et al.  Curing of Thick Angle-Bend Thermoset Composite Part: Curing Process Modification for Uniform Thickness and Uniform Fiber Volume Fraction Distribution , 2000 .

[7]  Thomas D Kim,et al.  Fabrication and testing of thin composite isogrid stiffened panel , 2000 .

[8]  Thomas D Kim,et al.  Fabrication and testing of composite isogrid stiffened cylinder , 1999 .

[9]  Reza Vaziri,et al.  A two-dimensional flow model for the process simulation of complex shape composite laminates , 1999 .

[10]  Wen-Bin Young,et al.  Consolidation and cure simulations for laminated composites , 1996 .

[11]  F. Lai,et al.  Autoclave curing of thermosetting composites: process modeling for the cure assembly , 1994 .

[12]  M. Hojjati,et al.  Curing simulation of thick thermosetting composites , 1994 .

[13]  John W. Gillespie,et al.  Two-Dimensional Cure Simulation of Thick Thermosetting Composites , 1991 .

[14]  Raju Davé,et al.  A Unified Approach to Modeling Resin Flow During Composite Processing , 1990 .

[15]  J. L. Kardos,et al.  A model for resin flow during composite processing: Part 1—general mathematical development , 1987 .

[16]  G. Springer,et al.  Curing of Epoxy Matrix Composites , 1983 .

[17]  George S. Springer,et al.  Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin , 1982 .

[18]  Piaras Kelly,et al.  Simulation of the reinforcement compaction and resin flow during the complete resin infusion process , 2010 .

[19]  Antonio C. M. Sousa,et al.  Modeling of flow and thermo-kinetics during the cure of thick laminated composites , 2003 .

[20]  Steven Huybrechts,et al.  Analysis and behavior of grid structures , 1996 .

[21]  J. Westhuizen,et al.  Development of a numerical code that simulates combined heat transfer, resin flow and compaction during composites processing , 1995 .

[22]  E. Eckert,et al.  Analysis of heat and mass transfer , 1971 .