Manufactured chemistry: Rethinking unit operation design in the age of additive manufacturing

[1]  Wei Chen,et al.  3D printing of versatile reactionware for chemical synthesis , 2016, Nature Protocols.

[2]  A. Inayat,et al.  Assemblies of mesoporous FAU-type zeolite nanosheets. , 2012, Angewandte Chemie.

[3]  Xiaohong Wang,et al.  Preparing two-dimensional nano-catalytic combustion patterns using direct inkjet printing , 2014 .

[4]  T. Bieringer,et al.  Future Production Concepts in the Chemical Industry: Modular – Small‐Scale – Continuous , 2013 .

[5]  W. Schwieger,et al.  Zeolite Coatings on Microcellular Ceramic Foams: A Novel Route to Microreactor and Microseparator Devices , 2004 .

[6]  Ahmed F. Ghoniem,et al.  Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations , 2016 .

[7]  Michael Baldea,et al.  Modular manufacturing processes: Status, challenges, and opportunities , 2017 .

[8]  John N. Stuecker,et al.  Advanced Support Structures for Enhanced Catalytic Activity , 2003 .

[9]  James F. Klausner,et al.  An R&D Strategy to Decouple Energy from Water , 2017 .

[10]  Bethany C Gross,et al.  3D printed microfluidic devices with integrated versatile and reusable electrodes. , 2014, Lab on a chip.

[11]  F. Goller,et al.  Ventilation patterns of the songbird lung/air sac system during different behaviors , 2013, Journal of Experimental Biology.

[12]  K. Sundmacher,et al.  Towards a Methodology for the Systematic Analysis and Design of Efficient Chemical Processes - Part 1: From Unit Operations to Elementary Process Function- , 2008 .

[13]  Joel P. Clark,et al.  Automobile bodies: Can aluminum be an economical alternative to steel? , 2001 .

[14]  A. Ghoniem,et al.  Gas-flow distribution in bubbling fluidized beds: CFD-based analysis and impact of operating conditions , 2017 .

[15]  Josua P. Meyer,et al.  The constructal size of a heat exchanger , 2017 .

[16]  Keun-Ho Choi,et al.  Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources , 2018 .

[17]  Philip J. Kitson,et al.  3D printed high-throughput hydrothermal reactionware for discovery, optimization, and scale-up. , 2014, Angewandte Chemie.

[18]  Ole Sigmund,et al.  Giga-voxel computational morphogenesis for structural design , 2017, Nature.

[19]  Ahmed F. Ghoniem,et al.  Study of the effect of reactor scale on fluidization hydrodynamics using fine-grid CFD simulations based on the two-fluid model , 2016 .

[20]  Daniel Irimia,et al.  Practical Challenges in the Energy-Based Control of Molecular Transformations in Chemical Reactors , 2014 .

[21]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[22]  Edward W. Merrow,et al.  Oil and Gas Industry Megaprojects: Our Recent Track Record , 2012 .

[23]  Tom Van Gerven,et al.  Structure, energy, synergy, time - the fundamentals of Process Intensification , 2009 .

[24]  T. E. Bruns,et al.  Topology optimization of convection-dominated, steady-state heat transfer problems , 2007 .

[25]  Ole Sigmund,et al.  Manufacturing tolerant topology optimization , 2009 .

[26]  Philip J. Kitson,et al.  Integrated 3D-printed reactionware for chemical synthesis and analysis. , 2012, Nature chemistry.

[27]  James K. Guest,et al.  Topology Optimization of Fixed-Geometry Fluid Diodes , 2015 .

[28]  Robert F. Singer,et al.  Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure , 2014 .

[29]  J. Maina,et al.  Structure, function and evolution of the gas exchangers: comparative perspectives , 2002, Journal of anatomy.

[30]  Alessandra Puglisi,et al.  Additive Manufacturing Technologies: 3D Printing in Organic Synthesis , 2018 .

[31]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[32]  Jianping Li,et al.  Systematic process intensification using building blocks , 2017, Comput. Chem. Eng..

[33]  Klaus Lackner,et al.  Small Modular Infrastructure , 2013 .

[34]  J. Petersson,et al.  Topology optimization of fluids in Stokes flow , 2003 .

[35]  M. Lieberman.  Market Growth, Economies of Scale, and Plant Size in the Chemical Processing Industries , 1987 .

[36]  Andreas Weilhard,et al.  Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles , 2017 .

[37]  Tsuyoshi Nomura,et al.  Topology optimization for fluid–thermal interaction problems under constant input power , 2013 .

[38]  Christian H. Hornung,et al.  Continuous flow hydrogenations using novel catalytic static mixers inside a tubular reactor , 2017 .

[39]  A. Bejan,et al.  Constructal theory of generation of configuration in nature and engineering , 2006 .

[40]  Wai Yee Yeong,et al.  Direct selective laser sintering and melting of ceramics: a review , 2017 .

[41]  Gregory Nellis,et al.  A fully developed flow thermofluid model for topology optimization of 3D-printed air-cooled heat exchangers , 2017 .

[42]  Vivek V. Ranade,et al.  Intensifying Multiphase Reactions and Reactors: Strategies and Examples , 2017 .

[43]  Chang‐jun Liu,et al.  Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives , 2017 .

[44]  Wenmiao Shu,et al.  Additive Manufacturing: Unlocking the Evolution of Energy Materials , 2017, Advanced science.

[45]  M. Arie,et al.  Air-Side Heat Transfer Enhancement Utilizing Design Optimization and an Additive Manufacturing Technique , 2017 .

[46]  Steve Edmondson,et al.  Design and additive manufacture for flow chemistry. , 2013, Lab on a chip.

[47]  Klavs F. Jensen,et al.  Flow chemistry—Microreaction technology comes of age , 2017 .

[48]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[49]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[50]  A. Shooshtari,et al.  Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing , 2018 .

[51]  R. Kaufmann,et al.  Structuring hybrid palladium nanoparticles in metallic monolithic reactors for continuous-flow three-phase alkyne hydrogenation , 2016 .

[52]  W. Schwieger,et al.  Zeolitic Materials with Hierarchical Porous Structures , 2011, Advanced materials.

[53]  A. Ghoniem,et al.  Mixing dynamics in bubbling fluidized beds , 2017 .

[54]  Alain Bernard,et al.  Evaluating the Design for Additive Manufacturing: A Process Planning Perspective , 2014 .

[55]  W. Bonrath,et al.  A porous structured reactor for hydrogenation reactions , 2015 .

[56]  Yong Wang,et al.  From seconds to milliseconds to microseconds through tailored microchannel reactor design of a steam methane reformer , 2007 .

[57]  Joshua M. Pearce,et al.  Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger , 2017 .

[58]  Konrad Wissenbach,et al.  Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting , 2013 .

[59]  James K. Guest,et al.  Topology optimization of creeping fluid flows using a Darcy–Stokes finite element , 2006 .

[60]  Christoph Klahn,et al.  Design Strategies for the Process of Additive Manufacturing , 2015 .

[61]  Leroy Cronin,et al.  3D-printed devices for continuous-flow organic chemistry , 2013, Beilstein journal of organic chemistry.

[62]  Andres Tovar,et al.  An efficient 3D topology optimization code written in Matlab , 2014 .

[63]  Christian H. Hornung,et al.  Use of Catalytic Static Mixers for Continuous Flow Gas–Liquid and Transfer Hydrogenations in Organic Synthesis , 2017 .

[64]  C. Körner,et al.  Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting , 2015 .

[65]  Jean-Pierre Kruth,et al.  Additive manufacturing of zirconia parts by indirect selective laser sintering , 2014 .

[66]  P. Greil,et al.  Biotemplating of Luffa cylindrica sponges to self-supporting hierarchical zeolite macrostructures for bio-inspired structured catalytic reactors , 2006 .

[67]  Philip J. Kitson,et al.  Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.

[68]  Quantification of the influence of particle diameter on Polycyclic Aromatic Hydrocarbon (PAH) formation in fluidized bed biomass pyrolysis , 2017 .

[69]  K. Giannakoglou,et al.  Continuous Adjoint Methods for Turbulent Flows, Applied to Shape and Topology Optimization: Industrial Applications , 2016 .

[70]  S. Leviness,et al.  Velocys Fischer–Tropsch Synthesis Technology—New Advances on State-of-the-Art , 2014, Topics in Catalysis.

[71]  D. Gu,et al.  Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties , 2014 .