Fixed-switching-frequency DTC control for PM synchronous machine with minimum torque ripples

In this paper, fixed-frequency direct torque control (DTC) of a permanent magnet synchronous motor (PMSM) is presented. In this method, the stator voltage vector is generated according to the increase stator flux components in the stationary frame ( alpha,beta ). A control algorithm based on predictive control to reduce the effect of the computing time on the stator flux vector position is also presented. The implementation of this method in the case of a PMSM, which is done without hysteresis regulators, is simple and does not require any filter. Simulation and experimental results show that the proposed method reduces the torque ripple while achieving a good dynamic response.

[1]  Xin Wei,et al.  Minimization of torque ripple of direct-torque controlled induction machines by improved discrete space vector modulation , 2004 .

[2]  Mengjia Jin,et al.  A fuzzy DTC method with a SVM defuzzification to permanent magnet synchronous machine , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[3]  Seung-Ki Sul,et al.  Direct torque control of induction machine with variable amplitude control of flux and torque hysteresis bands , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[4]  Frede Blaabjerg,et al.  DSP based direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM) , 2002, Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on.

[5]  Jianguo Zhu,et al.  Continuous direct torque control of permanent magnet synchronous motor based on SVM , 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

[6]  Marian P. Kazmierkowski,et al.  Direct torque control of PWM inverter-fed AC motors - a survey , 2004, IEEE Transactions on Industrial Electronics.

[7]  Lin Weijie.  Study on direct torque control of permanent magnet synchronous motor based on observing stator flux linkage , 2006 .

[8]  S. Sul,et al.  New direct torque control of induction motor for minimum torque ripple and constant switching frequency , 1999 .

[9]  Ana Maria LLor.  Control directo de par a frecuencia de modulacion constante de motores sincronos de imanes permanentes , 2003 .

[10]  A.M. Llor,et al.  New hybrid direct-torque control for a winding rotor synchronous machine , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[12]  J. Cusido,et al.  Discrete Space Vector Modulation Applied on a PMSM Motor , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[13]  Romeo Ortega,et al.  A family of switching control strategies for the reduction of torque ripple in DTC , 2003, IEEE Trans. Control. Syst. Technol..

[14]  N.R.N. Idris,et al.  A New Torque and Flux Controller for Direct Torque Control of Induction Machines , 2006, IEEE Transactions on Industry Applications.

[15]  M.F. Rahman,et al.  A novel direct torque control for interior permanent magnet synchronous machine drive system with low ripple in torque and flux-a speed sensorless approach , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[16]  A very fast direct torque control for interior permanent magnet synchronous motors start up , 2005 .