Electrochemical Techniques for Corrosion

The sections in this article are Goals of Testing Experimental Design Considerations Sample Selection Surface Preparation Sample Masking Choice of Electrolyte Cell Design Choice of Technique Electrochemical Techniques for Determination of Corrosion Rate Potentiodynamic Polarization Corrosion Rate Measurement by Tafel Extrapolation Corrosion Rate Measurement by Fitting Polarization Curve to Wagner–Traud Equation Corrosion Rate Measurement by Linear Polarization Electrochemical Impedance Spectroscopy Corrosion Rate Determination by Electrochemical Noise Analysis (ENA) Comparison of the Techniques for Assessment of Corrosion Rate Techniques for Studying Passivity Techniques for Evaluating Localized Corrosion Exposure Testing Quartz Crystal Microbalance Scanning Kelvin Probe Scanning Probe Microscopy

[1]  Digby D. Macdonald,et al.  Application of Kramers‐Kronig Transforms in the Analysis of Electrochemical Impedance Data II . Transformations in the Complex Plane , 1986 .

[2]  K. Sieradzki,et al.  In Situ Scanning Tunneling Microscopy of Corrosion of Silver-Gold Alloys , 1991, Science.

[3]  F. Mansfeld,et al.  Electrochemical Noise Analysis of Iron Exposed to NaCl Solutions of Different Corrosivity , 1993 .

[4]  Florian Mansfeld,et al.  Evaluation of Coating Degradation with Electrochemical Impedance Spectroscopy and Electrochemical Noise Analysis , 1994 .

[5]  Weilong Zhang,et al.  Anisotropy of Localized Corrosion in AA2024-T3 , 1999 .

[6]  G. T. Burstein,et al.  The Current‐Time Relationship during Anodic Oxide Film Growth under High Electric Field , 1989 .

[7]  M. Stratmann,et al.  The structure and stability of metal surfaces modified by silane Langmuir-Blodgett films , 1992 .

[8]  G. Sauerbrey.  Verwendung von Schwingquarzen zur Wägung dünner Schichten und zur Mikrowägung , 1959 .

[9]  J. Kruger,et al.  Ellipsometric‐Potentiostatic Studies of Iron Passivity I . Anodic Film Growth in Slightly Basic Solutions , 1967 .

[10]  R. Cottis.  Interpretation of Electrochemical Noise Data , 2001 .

[11]  J. L. Dawson,et al.  The measurement of localized corrosion using electrochemical noise , 1981 .

[12]  E. Kálmán,et al.  Investigation of copper corrosion inhibition by STM and EQCM techniques , 1999 .

[13]  S. Trasatti,et al.  The concept of absolute electrode potential an attempt at a calculation , 1974 .

[14]  G. T. Burstein,et al.  Anodic behaviour of scratched silver electrodes in alkaline solution , 1980 .

[15]  R. Newman.  The dissolution and passivation kinetics of stainless alloys containing molybdenum—1. Coulometric studies of FeCr and FeCrMo alloys , 1985 .

[16]  M. Stratmann,et al.  The delamination of polymeric coatings from steel Part 3: Effect of the oxygen partial pressure on the delamination reaction and current distribution at the metal/polymer interface , 1998 .

[17]  G. Frankel,et al.  Metastable Pitting of Stainless Steel , 1987 .

[18]  Lord Kelvin,et al.  V. Contact electricity of metals , 1898 .

[19]  F. Mansfeld.  The Polarization Resistance Technique for Measuring Corrosion Currents , 1976 .

[20]  Digby D. Macdonald,et al.  Application of Kramers‐Kronig Transforms in the Analysis of Electrochemical Systems I . Polarization Resistance , 1985 .

[21]  M. Keddam,et al.  Electrochemical Quartz Crystal Microbalance Corrosion Sensor for Solid Metals and Metal Alloys Application to the Dissolution of 304 Stainless Steel , 2001 .

[22]  H. Takenouti,et al.  Use of impedance measurements for the determination of the instant rate of metal corrosion , 1972 .

[23]  R. Brigham,et al.  Effect of Alloying Additions on the Pitting Resistance of 18% Cr Austenitic Stainless Steel , 1974 .

[24]  R. Lillard,et al.  A Novel Method for Generating Quantitative Local Electrochemical Impedance Spectroscopy , 1992 .

[25]  Martin Stratmann,et al.  On the atmospheric corrosion of metals which are covered with thin electrolyte layers—I. Verification of the experimental technique , 1990 .

[26]  N. Pessall,et al.  Determination of critical pitting potentials of stainless steels in aqueous chloride environments , 1971 .

[27]  B. Macdougall,et al.  Anodic Oxide Films on Nickel in Acid Solutions , 1976 .

[28]  J. Dawson,et al.  Analysis of Electrochemical Noise Generated by Corroding Electrodes under Open‐Circuit Conditions , 1988 .

[29]  G. Frankel,et al.  Characterization of AA2024-T3 by Scanning Kelvin Probe Force Microscopy , 1998 .

[30]  J. Tester,et al.  Diffusional Effects in Simulated Localized Corrosion , 1975 .

[31]  F. Mansfeld.  Simultaneous Determination of Instantaneous Corrosion Rates and Tafel Slopes from Polarization Resistance Measurements , 1973 .

[32]  R. Ovarfort,et al.  New electrochemical cell for pitting corrosion testing , 1988 .

[33]  F. Huet,et al.  Noise Resistance Applied to Corrosion Measurements II. Experimental Tests , 1997 .

[34]  J. Bardwell,et al.  Use of 18O/SIMS and Electrochemical Techniques to Study the Reduction and Breakdown of Passive Oxide Films on Iron , 1988 .

[35]  R. A. Oriani,et al.  Application of Kelvin Microprobe to the Corrosion of Metals in Humid Atmospheres , 1991 .

[36]  U. Bertocci,et al.  Noise Resistance Applied to Corrosion Measurements III. Influence of the Instrumental Noise on the Measurements , 1997 .

[37]  P. Marcus,et al.  XPS and STM Investigation of the Passive Film Formed on Cr(110) Single‐Crystal Surfaces , 1994 .

[38]  A. Bard,et al.  Electrochemical and Scanning Tunneling Microscopic Study of Dealloying of Cu3Au , 1991 .

[39]  G. T. Burstein,et al.  Growth of passivating films on scratched 304L stainless steel in alkaline solution , 1983 .

[40]  G. Frankel,et al.  Corrosion of Thin Film Magnetic Disk: Galvanic Effects of the Carbon Overcoat , 1989 .

[41]  R. Ovarfort.  Critical pitting temperature measurements of stainless steels with an improved electrochemical method , 1989 .

[42]  D. W. Rice,et al.  Atmospheric Corrosion of Cobalt , 1979 .

[43]  G. Frankel,et al.  The Influence of Dichromate Ions on Aluminum Dissolution Kinetics in Artificial Crevice Electrode Cells , 1999 .

[44]  F. Hunkeler,et al.  Determination of Pit Growth Rates on Aluminum Using a Metal Foil Technique , 1981 .

[45]  F. Huet,et al.  Analysis of Electrochemical Noise by Power Spectral Density Applied to Corrosion Studies Maximum Entropy Method or Fast Fourier Transform , 1998 .

[46]  C. Wagner,et al.  Über die Deutung von Korrosionsvorgängen durch Überlagerung von elektrochemischen Teilvorgängen und über die Potentialbildung an Mischelektroden , 1938 .

[47]  T. A. Hatton,et al.  Mass transfer and electrochemical kinetic interactions in localized pitting corrosion , 1986 .

[48]  Michel Keddam,et al.  Faradaic Impedances: Diffusion Impedance and Reaction Impedance , 1970 .

[49]  M. Stratmann,et al.  The delamination of polymeric coatings from electrogalvanised steel – A mechanistic approach. Part 1: delamination from a defect with intact zinc layer , 2001 .

[50]  G. Frankel,et al.  Pitting in Aluminum Thin Films Supersaturation and Effects of Dichromate Ions , 1998 .

[51]  R. Brigham,et al.  Temperature as a Pitting Criterion , 1973 .

[52]  K. Hladky,et al.  The measurement of corrosion using electrochemical noise , 1982 .

[53]  G. Sauerbrey,et al.  Use of quartz vibration for weighing thin films on a microbalance , 1959 .

[54]  John R. Scully,et al.  Polarization Resistance Method for Determination of Instantaneous Corrosion Rates , 2000 .

[55]  J. Kruger,et al.  Using local electrochemical impedance spectroscopy to examine coating failure , 1995 .

[56]  B. E. Wilde,et al.  The use of current/voltage curves for the study of localized corrosion and passivity breakdown on stainless steels in chloride media , 1971 .

[57]  G. Frankel,et al.  Influence of Dichromate Ions on Corrosion of Pure Aluminum and AA2024‐T3 in NaCl Solution Studied by AFM Scratching , 1999 .

[58]  Martin Stratmann,et al.  On the atmospheric corrosion of metals which are covered with thin electrolyte layers. III, The measurement of polarisation curves on metal surfaces which are covered by thin electrolyte layers , 1990 .

[59]  P. Marcus,et al.  XPS and STM Study of Passive Films Formed on Fe‐22Cr(110) Single‐Crystal Surfaces , 1996 .

[60]  M. Stratmann,et al.  Surface Modification by Ordered Monolayers: New Ways of Protecting Materials Against Corrosion , 1999 .

[61]  G. Frankel,et al.  The growth of 2-D pits in thin film aluminum , 1990 .

[62]  H. H. Uhlig,et al.  Environmental Factors Affecting the Critical Potential for Pitting in 18–8 Stainless Steel , 1966 .

[63]  G. Frankel,et al.  Pit Growth Study in Al Alloys by the Foil Penetration Technique , 2000 .

[64]  G. T. Burstein,et al.  The analysis of anodic films formed on cobalt in bicarbonate and borate electrolytes , 1981 .

[65]  R. Gomer,et al.  An experimental determination of absolute half‐cell emf’s and single ion free energies of solvation , 1977 .

[66]  Robert G. Kelly,et al.  Confirmation of the Applicability of Scratched Electrode Techniques for the Determination of Bare Surface Current Densities , 1990 .

[67]  M. Stratmann,et al.  The Atmospheric Corrosion of Iron — A Discussion of the Physico‐Chemical Fundamentals of this Omnipresent Corrosion Process Invited Review , 1990 .

[68]  D. Landolt,et al.  In-situ microgravimetric studies of passive alloys: potential sweep and potential step experiments with Fe-25Cr and Fe-17Cr-33Mo in acid and alkaline solution , 1999 .

[69]  F. Mansfeld,et al.  Determination of corrosion rates by electrochemical DC and AC methods , 1981 .

[70]  C. Laird,et al.  In Situ Atomic Force Microscopy Observations of the Corrosion Behavior of Aluminum‐Copper Alloys , 1996 .

[71]  Martin Stratmann,et al.  The Delamination of Polymeric Coatings from Steel. Part 1: Calibration of the Kelvinprobe and basic delamination mechanism , 1998 .

[72]  G. Frankel,et al.  Pit Growth in NiFe Thin Films , 1992 .

[73]  J. Ren,et al.  The scanning Kelvin microscope with voltage modulation: a new principle to image discrete surface potentials† , 1997 .

[74]  G. Frankel.  Pitting Corrosion of Metals A Review of the Critical Factors , 1998 .

[75]  G. Frankel,et al.  Repassivation of Pits in Aluminum Thin Films , 1996 .

[76]  F. Mansfeld,et al.  Technical Note: Corrosion Rates from Impedance Measurements: An Improved Approach for Rapid Automatic Analysis , 1983 .

[77]  G. Frankel,et al.  Repassivation Transients Measured with the Breaking-Electrode Technique on Aluminum Thin-Film Samples , 1995 .

[78]  W. A. Zisman,et al.  A NEW METHOD OF MEASURING CONTACT POTENTIAL DIFFERENCES IN METALS , 1932 .

[79]  F. Huet,et al.  Noise Resistance Applied to Corrosion Measurements I. Theoretical Analysis , 1997 .